Drivers rely more and more on advanced driver assistance systems (ADAS) based on radar technology. The radar sensor delivers information about the surrounding traffic environment. It is a must for every radar sensor to detect wanted signals from real objects also in the presence of unwanted interferers. The R&S®AREG100A provides a powerful solution for testing the immunity of radar sensors against interferers.

14-Aug-2018

Power consumption analysis with the Rohde & Schwarz specialty DC power supplies app card Power consumption analysis with the Rohde & Schwarz specialty DC power supplies app card Power consumption analysis with the Rohde & Schwarz specialty DC power supplies Power consumption analysis with the Rohde & Schwarz specialty DC power supplies app card Power consumption analysis with the Rohde & Schwarz specialty

09-Sep-2020

Simple, repeatable setup. Accurate, repeatable results.

25-Feb-2020

Functional Testing

Although data services in the context of eMBB, URLLC and mMTC are the pivotal drivers behind the 5G evolution, legacy services like voice and video communications still represent important services that operators want to offer to their subscribers. As part of the technology evolution, we have seen a major change from circuit-switched 2G networks with an initial focus on telephony to fully packet-switched 4G networks focused on internet data communications.This application note focuses on different details of voice services in 5G networks. Besides some theoretical background this document describes the procedure to setup a 5G network with R&S®CMW500 and R&S®CMX500 radio communication testers and how to carry out different functional voice call tests for 5G networks.

06-Oct-2021 | AN-No. 1SL364

Modern, capacitive touchscreens as used, for example, in mobile phones are susceptible to common mode noise exhibited by external power supplies (EPS).

17-May-2018

An easy-to-setup test solution for high speed multichannel acquisition for 5G NR signals

04-Mar-2020

This application note describes how to measure the control loop stability of switch-mode power supplies to get the best performance and confidence of the design. It will explain the main measurement concept and will guide the user during the measurements and mention the main topics in a practical manner. Wherever possible, a hint is given where the user should pay attention to it to avoid weak measurements. The Rohde and Schwarz buck converter reference board was designed in collaboration with Texas Instruments and is used to illustrate the closed loop measurement in a practical manner.

01-Jul-2019 | AN-No. GFM321

The R&S®ELEKTRA EMC test software is a solution that controls complete EMC systems and automates measurements on equipment under test that is being tested for emissions and immunity compliance. It can be used to remotely control R&S®AdVISE, which is a visual inspection software to monitor up to 32 different Regions of Interest in one video for visible and audible changeThis Application Note describes how to set up R&S®ELEKTRA and R&S®AdVISE for remote testing.

23-Jul-2020 | AN-No. 1S005

Ethernet based remote services for Rohde & Schwarz DC power supplies and R&S®LCX LCR meters

27-Apr-2023

This application note explains how to detect, characterize, find and document interferers in cellular networks using the R&S®FSH spectrum analyzer.First it explains how to use the spectrum and interference analysis functions during each step of interference hunting. It also illustrates the explanations with a common interferer example. Then it points out the most common interference sources in cellular networks and gives tips on how to identify them.

21-Oct-2014 | AN-No. 1EF89

Bluetooth Low Energy (BLE) 5.1 has introduced Angle of Arrival (AoA) and Angle of Departure (AoD) to enrich the direction finding (DF) feature. This application note gives the guidance of how to perform the BLE 5.1 DF RF tests according to the RF test specification of BT 5.1 by using the Rohde & Schwarz test solutions.

30-Oct-2019 | AN-No. GFM327

The R&S®FSW signal and spectrum analyzer provides the high dynamic range needed to accurately measure the ON/OFF power of your transmitter in accordance with 3GPP TS 36.141.

17-Jan-2017

In civil aviation, instrument landing system (ILS) transmitters use antenna arrays to provide guidance to approaching aircraft. ILS performance strongly depends on the precise alignment of the magnitude and phase of each element in an antenna array. The R&S®ZNH handheld vector network analyzer with a built-in source allows fast, convenient on-site measurements on the ILS antenna system.

09-Aug-2021

Describtion and explanation of the MPEG and DVB-Standards and TV T&M

10-Dec-2011 | AN-No. 7BM_ADD01

Embedded power supplies combine traditional power supply components with multiple sensors, processing and control logic as well as digital communications interfaces. Test equipment for debugging requires isolated input channels for measurements of hazardous voltages. Additional digital channels support the analysis of digital signals, while trigger and decode capabilities are essential for time-correlated monitoring of serial protocol-based communications interfaces.

26-Apr-2016

To quantify uncertainties for network analyzer measurements, the influence of the entire system (network analyzer plus test setup and DUT) has to be taken into account. Usually, the overall uncertainty of the complete measurement setup is determined with the aid of a verification kit, containing highly accurate verification standards. Of course, the verification standards need to have the same connector type as the DUT. If such verification standards are not available, the overall error has to be estimated.

28-Jul-1998 | AN-No. 1EZ29

This application note shows how to perform user equipment (UE) receiver tests, such as block error rate (BLER) and throughput tests, under fading conditions with the R&S®CMW500 RF tester and the R&S®SMW200A vector signal generator in LTE(-A), W-CDMA (HSPA+), TD-SCDMA, GSM (GRPS and EGPRS(2)), CDMA2000 and 1xEV-DO.

03-Nov-2015 | AN-No. 1MA194

This application note describes the general setup and required equipment for EMC measurements according to the EMS standard IEC / EN 61000-4-3.

29-Mar-2007 | AN-No. 1SP32

Short test times in conjunction with accurate and repeatable measurement results are essential when testing and calibrating mobile phones at board level. The R&S FSP Spectrum Analyzer offers wide dynamic range, stable and accurate results within shortest sweep time, making it the ideal choice for high-volume production testing. The utilisation of both the list mode feature and the marker list function for the Spectrum Analyzer R&S FSP, with its unsurpassed measurement speed via remote control are demonstrated in this application note.

29-Aug-2003 | AN-No. 1MA65

Voice over IP for air traffic control

18-Jun-2013

When analyzing the robustness of data transmission systems, jitter is a key indicator. It is recommended to use jitter measurement instruments for both the time and frequency domain in order to differentiate between fast and slow moving artifacts.

22-Aug-2017

The R&S®SMW200A vector signal generator offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace signal generators, e.g. from other manufacturers, with the R&S®SMW200A without having to change the remote control code. This application note describes how to use the remote emulation feature in general. Furthermore, it describes in detail the remote emulation for each supported instrument, limitations of the individual emulations and the remaining differences between the emulated and the original commands.

29-Apr-2016 | AN-No. 1GP110

The R&S®CMW Wideband Radio Communication Tester offers an elaborate parametric test concept, including all RF test cases up to Bluetooth®5, that makes this flexible test platform ideal for designing and verifying Bluetooth® Low Energy (LE) circuitsand modules.

27-Jan-2017

This Application Note presents a program which combines FM tuner measurements to form automatically running sequences in line with DIN EN60315-4. It is an extension of Application Note 1GA43 and can be used with the Generator R&S SML and the Audio Analyzer R&S UPV or UPL.

15-Dec-2006 | AN-No. RAC-0502-0012

The International Electrotechnical Commission (IEC) created the MBRAI specifications, which call for strict conformance tests that ensure the proper functionality of mobile receiver terminals for DVB-T/H transmissions. MBRAI is a common abbreviation of the IEC 62002 standard and stands for “mobile and portable DVB-T/H radio access interface”. This Application Note describes how the Broadcast Test System R&S®SFU provides all functions to generate MBRAI-compliant test signals. Only two special measurements require additional sources. For this purpose, the Test Transmitter R&S®SFE100 is used.

28-Nov-2007 | AN-No. 7BM61

Determining the delay of the video signal in relation to the audio signal aids evaluation of the quality of screens with an audio output. In some cases, such delays can reach as much as 100ms, which can cause significant irritation. This delay occurs because videosignal processing requires more computing power than audio-signal processing. The measurement solution described in this application note analyzes delays of up to +-400ms at a resolution in the order of µs.

21-Apr-2010 | AN-No. 7BM77

radio signals, radio services, sensitive radiocommunications systems, radio-controlled landing systems, automatic landing systems, air traffic control, UMS100, ARGUS Automatic monitoring of radio signals at airports interfering with radio services Automatic monitoring of radio signals at airports interfering with radio services radio signals, radio services, sensitive radiocommunications systems, radio-controlled

04-Sep-2006

3-Port Adapter ZVR-B8 is an optional accessory to all Vector Network Analyzers of the ZVR family, namely ZVRL, ZVRE, and ZVR, and extends the two test ports PORT1 and PORT2 to a total of three test ports PORT1, PORT2 and PORT3. The option comprises an electronic single-pole double-throw switch (SPDT) by means of which PORT1 of the analyzer is switched to either PORT1 or PORT3 of 3-Port Adapter. Test port PORT2 of the analyzer is directly connected to PORT2 of the 3-Port Adapter and is not switched over.

04-Aug-1998 | AN-No. 1EZ26

The Internet of Things (IoT) is considered the driving force of current and future wireless communications. In release 13, 3GPP has specified Narrowband-IoT (NB-IoT) as a new physical layer. This application note gives a short introduction to NB-IoT and shows the easy measurements with Rohde & Schwarz instruments.

30-Jun-2017 | AN-No. 1MA296

The power efficiency of the drive electronics is a key parameter when developing electric drive systems. The conduction loss of the electric drive electronics is of special interest. One important parameter for determining the conduction loss is the RDS(on) of the MOSFET. When a switching MOSFET is off, it has a high drain-to-source voltage, but when it is turned on, the voltage drops to just a few hundred millivolts. A highresolution oscilloscope is needed to measure these low voltages. Probe compensation and correct probing are also vital for accurate RDS(on) measurements.

19-Mar-2015