The DVB-H standard is a specification for bringing television broadcast services to handheld receivers. In order to save battery power, data for a specific service is transmitted in short bursts. This type of transmission utilizes special techniques within the transport stream. The R&S DVM offers a wide range of functions to analyze the characteristics of the DVB-H transport stream. This document describes the characteristics of the DVB-H transport stream and shows how the R&S DVM can be used for efficient analysis in research and development, production, and broadcasting.

04-Jul-2006 | AN-No. 7BM59

Automotive radar is vital to the advanced driver assistance systems (ADAS) that will help achieve Net Zero (zero accidents, zero fatalities) targets in the automobile industry. In a driving environment, radar sensors must detect real objects even when there is interference. The R&S®AREG800A automotive radar echo generator is essential to any solution that tests radar sensor immunity to interference.

15-Jun-2023

Using the optional three-port or four-port adapter (ZVR-B8 and ZVR-B14), PORT 1 and PORT 2 of the network analyzers of the ZVR family (ZVRL, ZVRE and ZVR) can be expanded to up to four ports. Thus automatic measurements on three- and four-port DUTs can be easily performed without any reconnection of ports being required. With the electronic switches in the adapters, switchover between the various ports is fast to the extent that the known high measurement and display speed of the analyzers of the ZVR family is fully maintained.

04-Aug-1998 | AN-No. 1EZ37

Most of the tests specified in standard TS 34.121 [1] for 3GPP Rel-5 can be performed with R&S®CMU200. This document provides a step by step guide on how to perform Rel-5 measurements on transmitter characteristics, receiver characteristics and performance tests according to TS 34.121 V8.7.0 clauses 5, 6 and 9 with standalone R&S®CMU200. Test cases that require additional instruments, e.g. fading generator (R&S®SMU200A or R&S®AMU200A) will be discussed in brief in this application note with recommended reference. A set of *.sav files based on R&S®CMU200 firmware V5.03 for UE supporting operating band I with power class 3 in RMC 12.2 kbps + HSDPA is attached to this application note.

13-Oct-2009 | AN-No. 1CM72

This application note describes how to test audio amplifier audio characteristic using the audio analyzer R&S® UPV in accordance with standard IEC 60268-3. The test items include gain, frequency response, harmonic distortion, modulation distortion, difference-tone intermodulation, dynamic intermodulation distortion, noise and cross-talk. The test items are explained and the test steps are described in detail.

13-Feb-2008 | AN-No. RCS0704-0032

The R&S®ZVA vector network analyzer with the R&S®ZVA-K9 option enables absolute group delay measurements on devices with embedded LO without the need for a calibration mixer

17-May-2013

In order to clearly visualize and make repeatable measurements on signals with amplitudes of less than 1/100 of a division, and stabilize signals captured over very long periods, the R&S®RTO oscilloscope’s powerful combination of measurement and math channel capabilities allows corrective offset adjustments on individual acquisitions more than one hundred times per second.

10-Sep-2015

Crucial for proper operation of mobile networks - Part 3 of the series on Cable and Antenna verification

Key points: Critical Infrastructure: Leaky feeder systems are a crucial, yet costly to modify, element of in-building and tunnel infrastructure for mobile communication coverage.Vulnerability to Environmental Factors: The leaky feeder system's exposure to high humidity, extreme temperatures, and physical stress makes it prone to water ingress, corrosion, mechanical damage, and material degradation.Fundamental Properties: Changes in a leaky feeder system's characteristic impedance cause reflections of forward RF energy, resulting in discontinuities, which can occur at connectors, kinks, or compressions in the cable.Measurement Techniques: Due to practical limitations, leaky feeder system testing typically involves measuring insertion and return loss, supplemented by evaluating key performance indicators (KPIs) and user equipment reports to assess actual coverage and identify potential defects.

05-Dec-2024 | AN-No. 8NT19

- not available -

20-Apr-1998 | AN-No. 1GPAN02

The R&S®ZNB vector network analyzer together with the R&S®HF907 double-ridged waveguide horn antenna provides fast and accurate TD SVSWR measurements in line with ANSI C63.25.

06-Aug-2018

Analog-to-digital converters (ADCs) have taken giant steps in speed and accuracy over the past years: Such devices allow high-speed video processing and even software defined radio (SDR) applications, where digitization is being performed at ever-higher intermediate frequencies (IF). This has clearly raised the bar for ADC test equipment, especially regarding the noise performance of the analog input signal and sample clock sources used in the test setup. The R&S®SMA100B offers outputs for the analog input signal of the ADC as well as the clock input signal in one single instrument - both with outstanding signal purity.

11-Jan-2021 | AN-No. 1GP66

This application note and associated application software may be used to conduct psychoacoustic speech quality evaluation for Voice over LTE (VoLTE) connections. The measurements are based on recommendations ITU-T P.862 and ITU-T P.863, respectively.

21-Feb-2014 | AN-No. 1MA204

Many applications in aerospace and defense as well as in mobile communication require a defined magnitude and phase relation between several signals, for example, to design a smart antenna array and it's distribution network, or to ensure accurate phase alignment between different transmitter or receiver chains of T/R modules. Magnitude can be measured with spectrum analyzers or power meters. For phase measurements, a vector network analyzer is the easiest, fastest and most accurate instrument.This application note shows how to measure the phase accurately between several signals using vector network analyzers of the R&S®ZNA, R&S®ZNB and R&S®ZNBT families.

11-Jul-2019 | AN-No. 1EZ82

This Application Note describes testing S-parameters under pulsed conditions with the R&S®ZVA vector network analyzer and either the ZVAX24 Extension unit with pulse modular option or the R&S®SMF signal generator with pulse modulator as a signal source.In addition a constant power level calibration for applications requiring high drive power for test and measurement of device under test (DUT) is also included. A LDMOS S-band radar power transistor is used as example DUT. The pulse profile mode of the R&S®ZVA is used to analyze the time-dependent behavior of the DUT.

11-Apr-2013 | AN-No. 1MA126

Sequencer Software Tool

20-Feb-2015

Enhanced Mobile Broadband, Massive Machine Type Communication, Ultra-reliable and low latency communication have been identified as the requirements to be supported by the 5thGeneration of Mobile Communication, short 5G. 5G is extensively discussed in the wireless industry. A lot of research and pre-development is being conducted worldwide, including an analysis of the waveforms and access principles that are the basis for current LTE and LTE-Advanced networks.In this application note we discuss potential 5G waveform candidates, list their advantages and disadvantages and compare them to Orthogonal Frequency Division Multiplexing (OFDM), which is used in LTE/LTE-Advanced.

10-Jun-2016 | AN-No. 1MA271

For customers who have already used automated R&S SFQ setups in development and production, the implementation of the successor instrument results in a need to adjust the SCPI commands formerly used.This document provides an overview on how SCPI commands that are used with the R&S SFQ change with the new test transmitter as well as a cross-reference list in the form of an EXCEL sheet.

23-Jun-2006 | AN-No. 7BM56

Despite the advent of advanced digital transmission methods, analog broadcasting remains highly important. Until now, measurements on FM transmitters in connection with acceptance testing, commissioning and maintenance required using a variety of T&M instruments.The R&S ETL TV analyzer combines these instruments' capabilities in a single unit and can completely replace them. Now, for the first time, acceptance test measurements can be conducted on FM transmitters quickly and easily using just one compact test instrument. The R&S ETL provides the functionalities of a power meter, spectrum analyzer, audio generator, FM measurement demodulator, stereo decoder, audio analyzer and more in just one box.

10-Sep-2013 | AN-No. 7BM105

- not available -

02-Nov-2009 | AN-No. 7BM14

High-speed serial interfaces often transmit data with differential signaling. For probing on the signal, trace differential probes are used. Besides the differential inputs, these probes often provide an additional connection for ground – especially the higher bandwidth models. The ground connection on the R&S®RT‑ZM modular multimode probes can be used to improve measurements on high-speed differential interfaces.

29-Jan-2025

Voice over IP for air traffic control

15-Oct-2012

Integrated beamformer ICs shrink the size of antenna feed electronics. Multiport network analyzers shrink the necessary test setup down to one instrument.

08-Jan-2019

The numerous supply voltages of FPGAs, CPUs and DSPs need to be powered-up in a specific order to ensure reliable operation. It is crucial to verify this power sequencing during circuit design and product development.

08-Oct-2018

Many measurements in audio applications have to be monitored for compliance with specified limit values. Therefore, sometimes a whole series of measurements have to be compared with a fixed limit value, in other case it might be necessary to define different tolerances for example for different frequency ranges. Both can be done using Audio Analyzer UPD or UPL. This application note covers the different possibilities of limit checking, it demonstrates how to edit limit files and presents a program to easily generate files for checking the limits of frequency response measurements. Furthermore the display modes for different kinds of references are explained.

04-Jun-1998 | AN-No. 1GA33

This is a very special application note for all those who have seen the ZVatch (ZVR watch) and not really believed the nice red curve on its face. This curve can actually be generated with a Vector Network Analyzer ZVR.

25-Jan-2002 | AN-No. 1EZ28

In the T&M world, instrument remote control over SNMP (simple network management protocol) lives in the shadow of IEEE/GPIB (general purpose interface bus) based remote control, and only a handful of the T&M equipment available worldwide supports the protocol. It is therefore no surprise that for most T&M engineers familiar with text-based commands over IEEE/GPIB (and lately LAN), the SNMP protocol seems a bit odd and to some even complex at first. The SNMP Toolkit for LabVIEW™ from Viodia™ Inc. can save a considerable amount of development time and furthermore helps programmers to overcome the initial complexities of SNMP programming.

18-Oct-2007 | AN-No. 7BM70

NGE100B, HMC804x, HMP2000, HMP4000, HM8143, NGL200, NGM200, M3SR IN4000A, Power supplies, DC Power supplies, The arbitrary waveform feature o Rohde & Schwarz solutions allow you to simulate device behaviors and replaces basic standalone arbitrary waveform generators. Emulate real-world scenarios with Rohde & Schwarz power supplies NGE100B, HMC804x, HMP2000, HMP4000, HM8143, NGL200, NGM200, M3SR IN4000A

04-Nov-2019

This White Paper describes the implementation of real-time capabilities within the R&S®FSW (with option K160R) and the R&S®FSVR. It shows fields of application as well as the technical implementation.

20-Mar-2015 | AN-No. 1EF77

For automated test applications, measurement time is often as important as the quality of the measurement. As with many situations, time is money. In practice, phase noise measurements are generally not considered fast, but test engineers still desire to save as much test time as possible. The Rohde & Schwarz®FSWP (FSWP) is a modern, digital signal processing based, phase-noise test set that performs many tasks in parallel in an effort to improve measurements speed. However, several measurement settings drastically affect measurement speed. This paper will discuss these settings and provide suggestions on improving overall measurement speed.The three key instrument parameters that affect FSWP measurement speed are:1. Number of cross correlations2. Resolution bandwidth (RBW)3. Offset frequency span

08-Oct-2020 | AN-No. GFM354

This Application Note describes measurements on RFID readers and chipcards according to ISO/IEC 14443 and similar standards, using a signal generator and a spectrum analyzer. Using a modern spectrum analyzer like the R&S®FSL not only increases accuracy and measurement speed, but also simplifies operation. Interoperability tests, in particular, are simplified by generating reader test signals with a signal generator. With software option R&S®SMx/AMU/AFQ-K6 chipcards can be tested without a reader

25-Jan-2010 | AN-No. 1MA113