9000 Results
FAQ: Check EMC32 Expansions
How can I set the special slot format in 5G NR measurement application for TDD?
Unfortunately I can control my NRP-Z sensor only from the VisaTester but not from my Python IDE when using the same Device Identifier "USB::0x0aad::0x0023::102800::INSTR". What is wrong?
This summary intends to give a fast overview for generation and verification of FM chirp signals using R&S Instruments and software Tools.
I want to use Port 1 and Port 3, so I tried to switch them on by setting the value to 1 (the default value) and to switch off Port 2 and Port 4 by setting the value to 0. But this does not work. How do I set the ports?
Active cal kit or cal unit does not contain all standards needed for selected cal procedure.
Scope Rider RTH: How to query when a trigger occured?
No synchronisation in Auto Trigger Mode
RTB/RTM/RTA - reduce Stop Frequency at FFT
How to generate separate graphics for the horizontal and vertical result using EMC32-EB
I have set my VNA to single sweep mode and switched on averaging with a factor of 10. But when I restart the single sweep, it stops after 1 sweep and the averaging is not done.
The SCPI sequence for configuration and data query for the I/Q software interface option K11.
Multichannel audio measurements
Why is it helpful to do Data Reduction?
Single Sweep
Location of the instrument Drivers
FAQ: How can I generate and Export a Test Rreport?
How to enable Telnet Client in Windows 7
Example on how to manually generate a *.wv file with Python
ELEKTRA, pre-define scaling of the graphics
How can I set up EMC32 so that it is possible to measure with the forward and reverse power with NAP?
Connection of an external Monitor to ZVA
I created an arbitrary waveform using a remote control program. I am struggling to find the according SCPI command to trigger the sequence. At the moment I can only trigger it manually using the button on the device. Is there a way to do this completely by remote control?
FAQ: Remote control via Telnet
CMWrun Settings for external Interfer usage in Bluetooth LE Test Plans.
Analyze correlations between WLAN and Bluetooth
How to generate Touchstone S2P files.
We have installed our test system with EMC32 and all devices, but NRP2 can not be set to physical from EMC32 using LAN interface.
LTE UE capabilities Interpretation of Bandwidth Combination Set values shown in CMW Callbox
When do I need a Pulse Limiter?