9088 Results
WCDMA RF Measurements with the R&S<sup>®</sup>CMW500 according to 3GPP TS 34.121
16-Dec-2011 | AN-No. 1CM95
Combination test Expanded test method for optocouplers
17-Jul-2006
1MA210 - Testing LTE Release 9 Features. This Application Note describes the T&M methods for LTE Release 9 features using Rohde & Schwarz instruments.
26-Apr-2013 | AN-No. 1MA210
Transmitter Tests in Accordance with the CTIA Plan for Wi-Fi Mobile Converged Devices
11-Oct-2006 | AN-No. 1MA107
Power Measurements on GSM/EDGE Signals with an NRT Power Reflection Meter
01-Dec-2003 | AN-No. 1GP47
The R&S®RTO digital oscilloscope analyzes RF pulses up to the maximum bandwidth of the instrument used.
09-Nov-2017
To measure linearity, a single R&S CLG cable load generator generates the entire full digital channel load of a cable TV network.
18-Jun-2013
Frequency Extension for Phase Noise Measurements with FSUP26/50 and Option B60 (Cross-Correlation)
10-Apr-2007 | AN-No. 1EF56
The R&S®ZNA vector network analyzer with integrated LO output and direct IF input options is a simple, cost-effective solution for 2-port and 4-port measurements using Rohde & Schwarz mmWave converters.
27-Apr-2023
radiated conformance testing according to TS 38.141-2, Rel. 16
3GPP defines the Radio Frequency (RF) conformance test methods and requirements for 5G NR Base Stations (BS) in the technical specifications TS 38.141.
30-Jun-2020 | AN-No. GFM325
Operation Guide for HSUPA Test Set-up According to 3GPP TS 34.121
08-Oct-2009 | AN-No. RCS0712-0053
IQWizard - IQ Signal Measurement and Conversion
26-Apr-2013 | AN-No. 1MA028
8NT01 MIMO Channel,Field Measurements,MIMO Evaluation,R&STSMx,R&SROMES Assessing a MIMO Channel 8NT01 MIMO Channel,Field Measurements,MIMO Evaluation,R&STSMx,R&SROMES
31-Aug-2017 | AN-No. 8NT01
Brake and Safety Electronics (ABS, ASR, ESP)
30-Mar-2006
Guidelines for MIMO Test Setups – Part 1
10-Mar-2010 | AN-No. 1GP50
Functionality testing of automotive infotainment devices - Application Card
19-Feb-2018
Next generation technologies in radar and satellite communication with high data rates call for innovative testing solutions to develop and manufacture RF components like voltage controlled oscillators (VCO). The R&S®FSPN phase noise analyzer increases efficiency and reproducibility of VCO characterization and phase noise measurements from lab to production.Voltage controlled oscillators are oscillators whose output frequency is controlled by means of an external tuning voltage, and they are used in a wide variety of electronic and RF applications like function generators, phase-locked loops including frequency synthesizers used in communication equipment. Different VCO design approaches yield different parameters and performance, and therefore it is important to measure or characterize VCOs under different conditions. This application note provides a short technical introduction to voltage controlled oscillators and explains the most common and the most important measurements made during the VCO characterization process.
17-May-2023 | AN-No. 1SL386
This Application Note describes basic operating principles of distance measurement equipment (DME) and tactical air navigation (TACAN).
28-Mar-2017 | AN-No. 1EF91
The R&S®ZNH handheld vector network analyzer helps field engineers quickly and reliably maintain radar systems to minimize downtimes.
22-Oct-2020
This application note describes how to use the UWB measurement functionality provided by R&S®CMP200 radio communication tester to perform HRP UWB PHY measurements for R&D and production purposes.
19-May-2021 | AN-No. GFM362
High-Speed Remote Control
12-May-2016 | AN-No. 1GP107
This Application Note identifies the various types of Test Port Adapters, their parameters, compatibilities and usages.
28-Apr-2015 | AN-No. 1MA100
Noise Figure Measurement without a Noise Source on a Vector Network Analyzer
27-Oct-2010 | AN-No. 1EZ61
With its small footprint, the R&S®ATS1000 antenna test system is the ideal direct far-field OTA system to test phased array antennas.
12-Mar-2020
Importing Data in ARB, Custom Digital Modulation and RF List Mode
22-Dec-2010 | AN-No. 1GP62
Simple testing of multi-frequency, multi-constellation GNSS receivers
22-Aug-2019
This application note reviews a new calibration subsystem which consists of Inline Calibration Units (ICUs). These ICUs are designed for in situ use, so they are left in place both during the calibration procedure and during the measurement of the Device Under Test (DUT).This adds versatility, convenience and accuracy to the VNA based measurement system, as it means the calibration can be refreshed at any time without manually disconnecting the DUT from the test system.
29-Sep-2017 | AN-No. 1EZ71
This application note describes the necessary settings in the user interface of the R&S® Broadcast Test Center BTC which supports the new “Next Generation Broadcast Standard ATSC 3.0” with BTC firmware version 2.20 and later.
27-Mar-2018 | AN-No. 1GP119
conducted conformance testing according to TS 38.141-1, Rel. 16
This application note describes how all mandatory RF transmitter tests according to Release 16, can be performed with signal or spectrum analyzers from Rohde & Schwarz.
27-Jan-2021 | AN-No. GFM313
Development Hints and Best Practices for Using Instrument Drivers
01-Jan-2013 | AN-No. 1MA153