9087 Results
This application note shows all necessary settings for performing Dual Receiver Measurement using the R&S®EMC32-K27 option via R&S® EMC32 Measurement Software.
28-Sep-2017 | AN-No. 1SP20
R&S IMS / Software Configuration and System Calibration according IEC / EN 61000-4-6 (conducted immunity)
29-Mar-2007 | AN-No. 1SP33
Measurement of Power Ramps of GSM, DCS1800 and PCS1900 Signals with Spectrum Analyzers of the FSE Family
16-Jan-2002 | AN-No. 1EF18
Measurements on PCS1900 Base Stations According to J-STD-007
17-Jan-2002 | AN-No. 1EF24
This white paper introduces measures to minimize malware threats and discusses ways to reduce risks while insuring that instrument performance is not compromised. The paper also discusses the use of anti-virus software in combination with Embedded Linux based instruments.
23-Nov-2016 | AN-No. 1GP112
Base station analysis with cellular network analysis
02-Aug-2024
Analyzing power designs for high-speed SoCs with multiphase buck converters
13-Jan-2025
Simplifying mixer measurements with the R&S ZNB
01-Oct-2013
The R&S®RTE is the best choice for analyzing small signals such as ECG signals with high signal fidelity.
17-Nov-2015
The R&S®SMW200A vector signal generator is ideal for high-precision RF and microwave tests requiring deembedding of the device under test (DUT).
11-Oct-2017
This application note highlights RF measurement challenges and introduces Rohde & Schwarz equipment required for RF characterization.
08-May-2017 | AN-No. 1MA275
This application note describes methods using an R&S®ZVA network analyzer to accurately measure all the key parameters of frequency converters.
30-Apr-2015 | AN-No. 1MA224
The R&S®RTM3000 and R&S®RTA4000 offer pulse width modulation (PWM) track analysis functionality, which is a great feature for verifying and optimizing soft start.
09-Jul-2019
How to perform automated GNSS receiver tests using the R&S®SMBV100A vector signal generator. The presented tests include TTFF, sensitivity, and location accuracy measurements, moving receiver and interference tests, and many more.
29-Jul-2014 | AN-No. 1GP86
1MA210 - Testing LTE Release 9 Features. This Application Note describes the T&M methods for LTE Release 9 features using Rohde & Schwarz instruments.
26-Apr-2013 | AN-No. 1MA210
This document describes the direct test mode mechanisms for testing Bluetooth Low Energy devices and explains how the direct test mode connection is established. The R&S CMW uses a USB port for the direct test mode connection while the Equipment under Test (EUT) may provide a USB port, a serial port or even a 2-wire UART interface for this purpose. Installing or assigning the right driver for the EUT is the main configuration task on the R&S CMW. For EUTs with USB port, the R&S CMW provides a Bluetooth Low Energy USB driver which has to be assigned to the connected EUT.
14-Dec-2016 | AN-No. 1C105
This application note introduces the R&S®Pulse Sequencer software and outlines necessary steps to generate a real life RF signal environment.
17-Jan-2017 | AN-No. 1MA288
The R&S Scope Rider is a modern versatile handheld oscilloscope featuring lab oscilloscope performance with the ruggedness of a battery operated handheld device.
04-Jan-2016
The document gives an overview and user guide about a link budget calculator for the main components of a basic OTA system. Accomopanied by an Excel sheet containing the Link Budget Calculator.
19-Mar-2019 | AN-No. 1EF104
WCDMA Signal Generator Solutions by Rohde & Schwarz
27-Nov-2000 | AN-No. 1GP39
This application note describes how to detect even small fails in dynamic turn indicators with R&S®AdVISE.
30-Jul-2020 | AN-No. 1S006
This application note describes topics such as: characteristics and implementation of RF signal paths, image responses etc. for the R&S®ESW EMI test receiver.
19-Nov-2020 | AN-No. 1EE26
The R&S ® EDST300 efficiently and precisely analyzes TACAN and DME ground stations, making it ideal for commissioning and regular maintenance.
16-Feb-2017
Measurement of Adjacent Channel Power on Wideband CDMA Signals
17-Mar-1998 | AN-No. 1EF40
This application note addresses the diverse possibilities of interoperability between Rohde & Schwarz power sensors and Rohde & Schwarz signal generators. All current and many legacy Rohde & Schwarz signal generators offer the capability of directly connecting power sensors. This enables power measurements without the need of a base unit or separate PC to display the readings. Furthermore, sensors can be used for special tasks like filling a user correction table or continuously controlling levels at crucial points in the measurement configuration.
31-Aug-2023 | AN-No. 1GP141
The R&S®NGM202/R&S®NGL202 power supply solution offers designers great functionality and performance to measure, evaluate and optimize converter efficiency.
02-Jun-2020
SITLine ETH: Highly secure data center connection for file and content applications
27-Jan-2014
Quality automotive radome tester analyzes your radar integration
27-Aug-2019
A deep, segmented memory combined with dedicated trigger conditions solves this problem by permitting the acquisition of relevant sequences without long pauses.
01-Dec-2017