9087 Results
R&S®CEPTOR – The military spectrum monitoring solution
25-Oct-2024
IQWizard - IQ Signal Measurement and Conversion
26-Apr-2013 | AN-No. 1MA028
Guidelines for MIMO Test Setups – Part 1
10-Mar-2010 | AN-No. 1GP50
(E)GPRS Measurements with R&S CMU200 and CMUgo
07-Sep-2004 | AN-No. 1CM52
Next generation technologies in radar and satellite communication with high data rates call for innovative testing solutions to develop and manufacture RF components like voltage controlled oscillators (VCO). The R&S®FSPN phase noise analyzer increases efficiency and reproducibility of VCO characterization and phase noise measurements from lab to production.Voltage controlled oscillators are oscillators whose output frequency is controlled by means of an external tuning voltage, and they are used in a wide variety of electronic and RF applications like function generators, phase-locked loops including frequency synthesizers used in communication equipment. Different VCO design approaches yield different parameters and performance, and therefore it is important to measure or characterize VCOs under different conditions. This application note provides a short technical introduction to voltage controlled oscillators and explains the most common and the most important measurements made during the VCO characterization process.
17-May-2023 | AN-No. 1SL386
This application note describes how to use the UWB measurement functionality provided by R&S®CMP200 radio communication tester to perform HRP UWB PHY measurements for R&D and production purposes.
19-May-2021 | AN-No. GFM362
Remote Setup for 3G High Dynamic Multi Charrier Signals with SMIQ03HD and FSU / FSQ
13-Dec-2002 | AN-No. 1MA62
High-Speed Remote Control
12-May-2016 | AN-No. 1GP107
Using R&S®ELEKTRA Migration Tool
The R&S®ELEKTRA EMC test software is the successor of the R&S®EMC32 EMC measurement software. Like the R&S®EMC32 EMC measurement software, the R&S®ELEKTRA offers a solution that controls complete EMC systems and automates measurements on equipment under test (EUT) that is being tested for emissions (EMI) and immunity (EMS) compliance. It has more features and test types compared to R&S®EMC32.As both software platforms use different file formats, R&S®EMC32 users who upgrade their existing software to the R&S®ELEKTRA platform need to perform a file conversion before migrating their data to the R&S®ELEKTRA platform. This is done by using the R&S®ELEKTRA Migration Tool, which is installed automatically with each R&S®ELEKTRA installation.This Application Note describes how to use the R&S®ELEKTRA Migration Tool (version 4.4 onwards) for converting the backup data into the XML format that can be interpreted by the R&S®ELEKTRA software. It also provides recommended conversion steps (Chapter 5) and troubleshooting tips (Chapter 6). For instructions on migrating the data using R&S®ELEKTRA Migration Tool below version 4.4, refer to the R&S®ELEKTRA user manual. For better user experience, we recommend using the latest software version for migration.This Application Note does not describe the steps to backup data using the R&S®EMC32 or R&S®ES-SCAN software. For procedures on how to do so, refer to their respective manuals.
04-May-2023 | AN-No. 1SL396
The R&S ® TSStream multi-TS streaming software streams a number of MPEG transport stream files simultaneously over a single IP interface.
16-Mar-2017 | AN-No. 1GP113
R&S CMWrun Sequencer Software Tool
20-Feb-2015
This application note focuses on how to measure and analyze FMCW radar signals with up to 6 GHz bandwidth with an R&S® RTP oscilloscope.
07-Aug-2019 | AN-No. GFM318
Connectivity of R&S<sup>®</sup> Test Solutions with AWR<sup>®</sup> Visual System Simulator™ (VSS)
20-May-2010 | AN-No. 1MA174
Measuring Color-Reproduction Quality on TVs and Monitors
13-Aug-2010 | AN-No. 7BM78
Rohde & Schwarz offers RF solid-state amplifiers for various frequencies ranging from 9 kHz to 6 GHz and delivering CW power up to 80 kW.
27-Apr-2016
Antenna Measurements, RCS Measurements and Measurements on Pulsed Signals with Vector Network Analyzers R&S ZVM, R&S ZVK
10-Sep-2004 | AN-No. 1EZ52
Measurements on AMPS phones with the R&S CMU200 and CMUgo
07-Sep-2004 | AN-No. 1CM53
This application note aims to explain test procedures and characterization of the relevant parameters for active phased array antennas.
04-Jul-2016 | AN-No. 1MA248
This document is divided in two parts and starts with an introduction in AC-DC conversion principles in general. It will present the most common circuits used for different power levels. The switching mode power supply (SMPS) converter will be the main focus as they are used everywhere in the electronics. Especially the flyback converter design in different flavors are highlighted. Nevertheless, all measurements are also applicable for other SMPS converter designs operating at higher power levels.In the second part of this document, most relevant testing methods and procedures of an AC-DC converter are highlighted. For each testing section, a fundamental part will be upfront discussed and it is followed by a presentation of a suitable measurement method. In this second part, the device under test (DUT) is considered as black box device and thus the structure is similar. Therefore, the testing parts consists of methods related to input tests, output tests and a combination of both like efficiency. Of course, some test performed at the output of the converter are also relevant for DC-DC converter, e.g. the validation of the output ripple.
14-Nov-2022 | AN-No. 1SL387
Common mode distortion of wide-bandgap power electronics probing
25-Nov-2024
This application note describes a test scenario tor cable components with an R&S®CLGD Cable Load Generator and an R&S®FSW Signal & Spectrum Analyzer.
24-Jan-2017 | AN-No. 1MA285
Upconverting Modulated Signals to Microwave with an External Mixer and the R&S<sup>®</sup>SMF100A Microwave Signal Generator
18-Dec-2008 | AN-No. 1GP65
Measurements on CD Players using the Audio Analyzers UPL or UPD and the Audio Test Disc UPA-CD
16-Feb-1998 | AN-No. 1GA21
Security through technology - the R&S®QPS quick personnel security scanners are specifically designed to make people screening at security checkpoints faster, more effective and comfortable.
23-Jan-2019
Remote Operation of R&S Instruments Using Remote Desktop Connection via LAN
05-Jul-2007 | AN-No. RAC-0703-0029
Monitoring on up to 10 000 channels with different parameter settings
13-Jul-2012
With high precision, an intuitive user interface and uncertainty bands provided directly on the screen, the R&S®ZNA takes accuracy to a new level.
19-Jul-2021
In this paper, we present the performance and the basic control of a MNA used for automatic spectrum clearance in LTE and 5G systems.Automatic spectrum clearance is a method to mitigate spectrum interference by the use of a mobile network analyzer (MNA).
02-Oct-2017 | AN-No. 1MA293