9095 Results
This paper investigates the evaluation complexities and importantce of PAM-4 interconnects at high data rates.
22-Oct-2020 | AN-No. GFM355
High dynamic range current measurements on IoT devices
01-Oct-2019
eCall is deployed in Europe and is required by law in new cars as of March 2018. Next generation eCall (NG eCall) is built on LTE and 5G.
06-Jun-2018
Usage of VISA for instrument control with USB and ethernet
28-Oct-2021 | AN-No. 1SL374
This application notes introduces two alternative methods how to do the Power Added Efficiency measurement.
22-May-2013 | AN-No. 1EZ64
Rohde & Schwarz makes the simulation of complex coexistence scenarios simpler than ever before, thanks to a quick and easy setup of complex interference scenarios.
18-Mar-2019
A Fabry-Pérot open resonator (FPOR) provided by QWED allows dielectric sheets to be accurately characterized in the frequency range from 110 GHz to 170 GHz using just one fixture.
14-Jan-2025
Doc.A/74 ATSC Receiver Performance Tests Made Easy with the R&S<sup>®</sup> SFU Broadcast Test System and the R&S<sup>®</sup> SFE Broadcast Tester
27-Sep-2012 | AN-No. 7BM71
This application note provides an introduction to the DDR memory technology and explains common challenges, related to the specific nature of DDR data, command and control buses.
30-Oct-2020 | AN-No. GFM340
For cable TV, the "last mile" to the connection at the home is the bottleneck that prevents higher data rates. The last mile is made up of optical fiber and coaxial cables, amplifiers and electrical/optical converters. This mix of optical fiber and coaxial cables is known as a hybrid fiber coax (HFC) network. One option for cable network providers to maximize both the downstream (DS) and upstream (US) data throughput using the existing cable TV network, but without making expensive changes to the HFC network infrastructure, is to employ the data over cable service interface specification (DOCSIS) 3.1. This Application Note discusses the fundamental technological advances of DOCSIS 3.1 and presents measurement solutions from Rohde & Schwarz.
02-Mar-2015 | AN-No. 7MH89
This application note shows developers and manufacturers of devices with LoRa wireless technology how transmitter measurements are conducted in line with FCC Part 15.247.
29-Nov-2017 | AN-No. 1MA295
Powerful end-to-end encryption for Ethernet private lines: R&S SITLine ETH protects against spionage and manipulation without decreasing throughput.
03-Mar-2015
Operation Guide for HSUPA Test Setup according to 3GPP TS 34.121
07-Oct-2009 | AN-No. 1CM73
The R&S RTO / R&S RTE digital oscilloscope is a valuable tool for analyzing EMI problems in electronic designs. High input sensitivity, high dynamic range and a powerful FFT implementation are key features for capturing and analyzing unwanted emissions
26-Feb-2015
R&S®Time Code Inserter: Time Code-Based A/V Distortion Analysis
16-Apr-2013 | AN-No. 7BM84
The R&S VTC/VTE video testers analyze and evaluate the quality of set-top boxes and TVs on the DUT’s A/V interfaces from a user perspective.
04-Feb-2014
Performing Amplifier Measurements with the Vector Network Analyzer ZVB
07-Feb-2007 | AN-No. 1EZ54
This application note describes Battery Life Measurements with the R&S®RT-ZVC02/04 Multi-Channel Probe. The measurements are described with the use of an oscilloscope.
17-Jan-2019 | AN-No. 1TD07
This application note demonstrates Rohde & Schwarz test solutions for generating WLAN 802.11ac signals and explains step-by-step how to configure a test signal. Several measurements are presented to illustrate EVM performance.
26-Apr-2013 | AN-No. 1GP94
This application note explains how to perform LTE base station measurements over the air (OTA) using the R&S®FSH4/8/13/20 handheld spectrum analyzer.
12-Sep-2013 | AN-No. 1EF87
Measuring Bit Error Rate using the R&S SFU-K60 Option
19-Dec-2006 | AN-No. 7BM51
Remote Emulation Modes with R&S Signal Generators
24-Jun-2008 | AN-No. 1GP71
Power converters with a full-bridge topology are frequently used in telecommunications and servers that need to be compact, efficient and cost sensitive, making them more complex. Switching patterns for all the main primary switches including synchronous rectifier switches need to be validated after the first protype is built. This complex validation requires proper measurement of switching patterns to prevent catastrophic switching patterns. Expertise and the right measurement tools are essential when identifying unexpected events in the converter switching process.
17-Jan-2024
he option R&S EMC32-K84 extends the internal report generator to support the generation of a summary test report over all selected test cases done for a DUT.
23-Apr-2015 | AN-No. 1SP09
The R&S®HMC8015 power analyzer provides seamless acquisition and realtime signal processing and accelerates the measurement.
12-Oct-2018
This application note provides guidance on the use of the software option, both for direct control and programming via the touchscreen, and for remote control using SCPI.
13-Jul-2020 | AN-No. GFM345
How to implement GTSL outside a test stand environment
02-Jul-2002 | AN-No. 1SC01
The R&S®SMA100B analog RF and microwave signal generator with its high-quality pulse modulator provides narrow pulse modulation.
30-May-2017