9088 Results
Measurement the inherent noise of a TV Receiver/Demodulator
20-Jul-2001 | AN-No. 7BM11
This document describes a method to separate common-mode and differential-mode separation using two oscilloscope channels. This separation approach works without any additional hardware component.
17-Sep-2020 | AN-No. GFM353
With high precision, an intuitive user interface and uncertainty bands provided directly on the screen, the R&S®ZNA takes accuracy to a new level.
19-Jul-2021
LTE beamforming can be accurately tested with one or more R&S®RTO digital oscilloscopes for a 1×2, 1×4 or even a 1×8 MIMO system.
08-Aug-2024
In this paper we will review the basics of spurious measurements and how the parameters used can affect the detection performance.
14-Jul-2017 | AN-No. 1EF97
The super-resolution DF method determines bearings of multiple emissions on the same frequency.
04-Mar-2016
The application fields of oscilloscopes extend to EMI debugging because of their powerful and easy-to-use FFT analysis capabilities– and save time and money.
23-Sep-2019
5 kW HF HIGH-POWER TRANSMITTERS FOR AIR TRAFFIC SERVICE
17-May-2023
Noise Power Ratio Signal Generation and Measurement
Noise Power Ratio is a tool for WinIQSIM™ to generate noise power ratio stimulus signals and measure the resulting noise power ratio of a device.
06-Nov-2015 | AN-No. 1MA29
This document answers frequently asked questions regarding Rohde & Schwarz Broadband Amplifiers. It describes remote operation and monitoring of the R&S® Broadband Amplifier series through a standard web browser.
04-Nov-2016 | AN-No. 7TA1
Tests of Audio Amplifiers in Accordance with Standard IEC 60268-3
13-Feb-2008 | AN-No. RCS0704-0032
Remote Emulation with the R&S<sup>®</sup>SMC100A Signal Generator
28-Feb-2012 | AN-No. 1GP90
In order to clearly visualize and make repeatable measurements on signals with amplitudes of less than 1/100 of a division, and stabilize signals captured over very long periods, the R&S RTO oscilloscope’s powerful combination of measurement and math channel capabilities allows corrective offset adjustments on individual acquisitions more than one hundred times per second.
10-Sep-2015
Level Error Calculation for Spectrum Analyzers
13-Jan-1998 | AN-No. 1EF36
This application note highlights various aeronautical radio navigation signals such as VHF omnidirectional radio range (VOR), instrument landing system (ILS) for glide slope (GS) and localizer (LLZ), as well as marker beacon (MB).
20-Apr-1998 | AN-No. 1GPAN02
The R&S®Pulse Sequencer software offers an easy way to simulate moving radar emitters and a moving receiver for EW receiver tests.The software together with the R&S®SMW200A vector signal generator is a powerful radar simulator
18-Sep-2018
MIPI D-PHY is a low-power, cost-effective physical layer interface, essential in mobile devices and advanced technology systems. It's a high-speed, source-synchronous interface used in smartphone cameras, smartwatch displays, drones, in-car entertainment, automobile cameras, and radar sensors. This application note explores MIPI D-PHY's features, functionality, and testing practices for device compliance, addressing common issues. It highlights Rohde & Schwarz's equipment for ensuring compatibility and solving issues with MIPI D-PHY, aligned with MIPI D-PHY specification version 2.5.Developed by the MIPI Alliance, D-PHY connects cameras and displays to a host processor via CSI-2 or DSI protocols. It features a master-slave, asymmetrical design for reduced link complexity. Key aspects include a unidirectional clock, optional data signal directions, different data rates for half-duplex operation, point-to-point communication, and high-speed (HS) and low-power (LP) modes for data transfer and battery preservation. In HS mode, D-PHY uses differential signaling with specific impedance, while in LP mode, it operates in a single-ended manner with high impedance termination.The application note from Rohde & Schwarz provides insights into characterizing and debugging MIPI D-PHY, offering conformance verification with MIPI Alliance standards and protocol decoding options.
31-Jan-2024 | AN-No. 1SL410
This application note reviews the measurement uncertainty analysis and traceability for phase noise with the new R&S®FSWP Phase Noise Analyzer.
05-Jul-2016 | AN-No. 1EF95
R&S®Server-Based Testing helps reduce test times for 5G New Radio multicarrier signals - each component carrier can be analyzed independently and in parallel.
13-Sep-2021
Distance-To-Fault (DTF) Measurement in 75 Ohm Systems with the R&S FSH3-TV
21-Sep-2006 | AN-No. 7BM60
Measurement of Frequency Settling Time of Synthesizers and Transmitters
12-Feb-1999 | AN-No. 1MA15
This application note shows how to measure the phase accurately between several signals using vector network analyzers of the R&S®ZNA, R&S®ZNB and R&S®ZNBT families.
11-Jul-2019 | AN-No. 1EZ82
RF chipset verification for UMTS LTE (FDD) with R&S<sup>®</sup>SMU200A and R&S<sup>®</sup>FSQ
19-Dec-2008 | AN-No. 1MA138
Frequency Range Extension of Spectrum Analyzers with Harmonic Mixers
05-Mar-1999 | AN-No. 1EF43
In this application note we discuss potential 5G waveform candidates, list their advantages and disadvantages and compare them to OFDM.
10-Jun-2016 | AN-No. 1MA271
AutoCal: Automatic Calibration of Vector Network Analyzer ZVR
28-Jul-1998 | AN-No. 1EZ30
The first part of this educational note presents the applications for and the most important types of signal generators. This is followed by a description of the construction and functioning of analog and vector signal generators.
03-May-2016 | AN-No. 1MA225
Channel Sounding in White Space Spectrum
13-Jul-2011 | AN-No. 1MA199
How to performe fundamental FM measurements such as frequency response, balance, stereo crosstalk, total harmonic distortion (THD), dual frequency distortion (DFD) and spurious modulation.
10-Sep-2013 | AN-No. 7BM105