I/Q waveform files contain the digital complex sample values of a radio signal. They can be synthetically computer-calculated for generating precisely defined contents, or they can represent the recording of a received live signal. The structure of these files has never been standardized, which is why so many different formats are in use today. R&S®IQ Converter and R&S®IQ Stream Extractor are programs that quickly and conveniently convert the contents of I/Q waveform files of nearly any structure into the I/Q format used by the R&S®BTC, R&S®CLG, R&S®SLG, R&S®SFU, R&S®SFE and R&S®SFE100 signal generators. This makes it possible for the signal generators to use their integrated ARB function to generate precise RF signals from nearly any I/Q waveform file.

03-Feb-2014 | AN-No. 7BM79

Today, digital audio signals are transmitted via standardized interfaces not only in the form of continuous data streams but also increasingly as burst audio signals. This application note shows various ways of generating and analyzing such data bursts with Audio Analyzer UPD. In the applications described, the parameters word clock, bit clock and word length can be set over wide ranges. Single-channel and dual-channel audio data with bit clocks far into the MHz range can be processed.

05-Nov-1997 | AN-No. 1GA38

- not available -

20-Jul-2001 | AN-No. 7BM28

This whitepaper provides an overview of the WLAN offload in LTE as standardized by 3GPP, as well as the enhancements for Wi-Fi standardized by IEEE and the Wi-Fi Alliance. It also describes access methods in the joint network, treats the security, and describes IP mobility. In addition network discovery and selection are explained.

10-Dec-2012 | AN-No. 1MA214

The constantly increasing number of telecommunication services and subscribers is putting more and more pressure on the availability of already scarse frequencies. Authorities responsible for monitoring and regulating the radio traffic are confronted with more and more complex problems relating to radiomonitoring and frequency management. Without exact data - a prerequisite for monitoring existing installations and planning new services - it is impossible to solve the problem. It is essential to use the proper measurement equipment. This Application Note deals with the following measurements: Measuring various signal parameters at defined frequencies. Monitoring emissions for compliance with specified limits for field strength, modulation depth/index, frequency deviation and offset.

18-Jan-2002 | AN-No. 1EE13

This application note describes how noise figure and gain of amplifiers or converters in the microwave range from 50 GHz to 67 GHz are measured. For this purpose the R&S FSU67 spectrum analyzer is equipped with application firmware R&S FS-K30 in combination with the Noisecom NC5115-60G, or NC5115-60GT Noise Figure Test Set.

12-May-2009 | AN-No. 1EF64

Femtocells or Home base stations are an important development for cellular networks. This application note describes the tests commonly used during the production of Femtocells, focusing on WCDMA, HSPA, and HSPA+ technology. Tests, test plans and hardware setups for Femtocells with and without receiver diversity are detailed. Find hints about the instrument settings and have a look at typical measurement results. An introduction to simulating GPS / A-GPS signals for testing the GPS receiver of a Femtocell completes the paper.

02-Feb-2012 | AN-No. 1MA139

The trigger is a key element of an oscilloscope. It captures specific signal events for detailed analysis and provides a stable view on repeating waveforms. Since its invention in the 1940s the oscilloscope trigger has experienced continuous enhancements. The fully digital trigger of the R&S®RTO digital oscilloscopes sets an innovation milestone that brings significant advantages for the oscilloscope user in terms of measurement accuracy, acquisition density, and functionality. This application note introduces the working principles of a conventional trigger system and explains the advantages of the real-time capable digital trigger of the RTO oscilloscopes.

11-Apr-2012 | AN-No. 1ER04

EMI Automotive Band Evaluation extension is an on-board EMI measurement sequence in broadband and communications frequency bands for automotive and aerospace applications. This application notes shows how to configure, run, and automatically document tests in a sequence coming with EMC32-K51.

17-Jul-2014 | AN-No. 1SP07

This application note is a programming guide. It briefly summarizes basic tips and information about SCPI programming for remote-controlling Rohde & Schwarz signal generators.

26-Apr-2013 | AN-No. 1GP79

1TD04 1TD04, DC/DC, Oscilloscopes The objective of this paper is to evaluate the performance of a power supply using an oscilloscope. The main measurements taken are the input frequency, output voltage, output current, and the switching frequency. Initial Evaluation of a DC/DC Switch Mode Power Supply 1TD04 1TD04, DC/DC, Oscilloscopes The objective of this paper is to evaluate the performance of a

26-Nov-2013 | AN-No. 1TD04

- not available -

20-Jul-2001 | AN-No. 7BM23

Millimeter-wave bands are of increasing interest for the satellite industry and potential 5G bands.Antennas for 5G applications make use of these high frequencies to incorporate a large count of radiating elements. These antenna arrays are essential for beamforming operations that play an important part in such next generation networks.This white paper introduces some of the fundamental theory behind beamforming antennas. In addition to these basic concepts, calculation methods for radiation patterns and a number of real world measurement results for linear arrays are shown.

15-Sep-2016 | AN-No. 1MA276

- not available -

20-Jul-2001 | AN-No. 7BM13

Data rates in the range of several Gigabit/s are needed to transmit signals like uncompressed video signals. Amendment 802.11ad to the WLAN standard defines the MAC and PHY layers for very high throughput (VHT) in the 60 GHz range. The specification 802.11-2016 has defined additional modulation and codings schemes for the 11ad single carrier part to increase the data rate. The OFDM part is obsolete.This white paper provides an introduction to the technology behind 802.11ad and highlights the test and measurement requirements.

21-Nov-2013 | AN-No. 1MA220

In contrast to standardized digital interfaces which are customary for communication between audio devices, diverse data formats are used between the internal modules of a particular device. The I²S interface developed by Philips has now been widely adopted for the latter. The data structure of this digital audio interface and the adaptation of Audio Analyzer UPD in the different operating modes of the I²S bus are described in this Application Note.

03-Apr-1998 | AN-No. 1GA25

Broadcasting transmitters are subject to particularly stringent standards with respect to broadcast signal quality, because even small faults can lead to service disruptions for many listeners. A single instrument, the R&S®ETL TV analyzer, performs all required DAB transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commissioning and preventive maintenance.

24-Jul-2013 | AN-No. 7BM104

This application note describes how to determine the uncertainty bounds for a given artificial network impedance for an estimate of the combined standard measurement uncertainty using the Rohde & Schwarz Software “AN Impedance Uncertainty Contribution”.

17-Dec-2010 | AN-No. 1EE23

- not available -

20-Jul-2001 | AN-No. 7BM20

LTE Location Based Services (LBS) involve the process of determining where a device is located. Global Navigation Satellite System (GNSS) based solutions are highly accurate and the technology of choice for absolute position accuracy, providing the device has a good line-of-sight, but this is not always the case. A device can be in a highly dense urban environment with reduced satellite visibility or indoors with very low signal levels.These limitations of GNSS systems have meant that LTE cellular based alternatives have been developed within 3GPP Release 9 and onwards.They are described in this white paper.

29-May-2015 | AN-No. 1SP05

Determining the field strength from transmitted power is not an easy job. Various, quite complicated formulas have to be evaluated correctly. This application note explains, how to calculate electric and magnetic field strength and power flux density. A program associated to this application note helps to do the calculation and converts Watts to mW and dBm, V/m to mV/m and dBmV/m as well as A/m to mA/m and dBmA/m. Additional applications are calculation of propagation loss or antenna factors.

10-Dec-2018 | AN-No. 1MA85

This document describes how a Windows®-based R&S® T&M instrument is remotely operated by an Android™ tablet as if working on it locally. Step-by-step procedures are provided for setting up and configuring the T&M instrument and the tablet. On the tablet, a special App implements the Windows® 'Remote Desktop' functionality. T&M instrument and tablet are connected via WLAN (also called Wi-Fi network).

22-Aug-2013 | AN-No. 1MA236

The family of ZNB vector network analyzers (VNA) from Rohde & Schwarz are the perfect instruments for analyzing RF amplifier small signal linear and nonlinear performance. This application note presents information on how to configure and use the R&S®ZNB vector network analyzer to successfully make accurate and quick measurement of basic RF amplifier parameters.The “SMARTerCal” calibration tool is presented, combining systematic error correction with calibrated receiver power, offering enhanced measurement accuracy with minimum effort.

11-Jul-2013 | AN-No. 1EZ65

DTV IP Inserter DIP1. Network for IP Insertion2. Insertion rate up to 10 Mbps3. Insertion rate higher than 10 Mbps4. Demonstration Scenario5. Demonstration Scenario End to End

30-Mar-2001 | AN-No. FTK01_0E

Nearly all tests in accordance with the test specification* can be performed with the R&S® CMU200/CBT alone. Some tests additionally call for signal generators to provide interference signals and also require spectrum analyzers. This application note describes the tests performed with additional equipment and presents straightforward solutions based on the CBTgo software.

06-Mar-2013 | AN-No. 1MA106

This application note describes the testing of the sensitivity of DAB receivers according to the European Standard EN 50248 ‘Characteristics of DAB receivers’, using the test set 'Automatic DAB Receiver Test'.

11-Nov-2005 | AN-No. FTK03

The present application note describes the possibilities of the Stream Explorer to be remotely controlled by some peripheral program via OLE. Extensions are also discussed, widening the fields of application of such a Client-Server architecture.

31-Mar-1999 | AN-No. 7BM02

High Speed Downlink Packet Access (HSDPA) and High Speed Uplink Packet Access (HSUPA) optimize UMTS for packet data services in downlink and uplink, respectively. Together, they are referred to as High Speed Packet Access (HSPA). Within 3GPP Release 7, 8, 9 and 10, further improvements to HSPA have been specified in the context of HSPA+ or HSPA evolution. This White Paper introduces key features of HSPA+ and outlines the changes to the radio interface.

14-Feb-2012 | AN-No. 1MA205

This document describes the typical measurements performed on mixers and how they can be implemented on the ZVA Vector Network Analyzer with the ZVA-K4 Frequency Conversion option. The document describes the concept and setups required to perform Conversion Loss, Isolation, Intermodulation and Reflection measurements.

06-May-2009 | AN-No. 1EZ58

1TD04 1TD04, DC/DC, Oscilloscopes The objective of this paper is to evaluate the performance of a power supply using an oscilloscope. The main measurements taken are the input frequency, output voltage, output current, and the switching frequency. Initial Evaluation of a DC/DC Switch Mode Power Supply 1TD04 1TD04, DC/DC, Oscilloscopes The objective of this paper is to evaluate the performance of a

26-Nov-2013 | AN-No. 1TD04