Simulation can be a big time-saver when designing EMI filters for DC/DC converters. Power supply control chip vendors offer various filter design tools that provide reasonable design choices for filter simulation before any hardware prototype is available. However, simulated results can differ significantly for different tools if simulated models are not accurate or do not cover all the relevant components. Performing a hardware measurement to evaluate the effectiveness of a simulated EMI filter is therefore indispensable.

21-Sep-2021

DVB-T signal quality is determined by measuring the modulation error ratio (MER). However, a poor MER does not indicate its causes since different interference factors overlap at the transmitter when a signal is generated and transmitted. The R&S®ETL TV test receiver now has a unique new measurement capability that makes it possible to demonstrate to what extent the modulator's phase noise affects the MER.

13-Jul-2012

The SGMA products from Rohde & Schwarz are optimized for use in production and automated applications. Their key characteristics are high speed and a compact design. The instruments are also an ideal enhancement for the R&S®SMW200A in MIMO applications. They can interface to the high-end vector signal generator and serve as additional RF outputs. This application note explains how to connect and interface with the SGMA instruments and gives some recommendations and hints about their use. It helps the user to get started and to understand how the instruments interact.

15-Oct-2015 | AN-No. 1GP103

combinational tests, terminal equipment, test system, electrical test, telecommunicaitons, open test platform, CompactTSVP, DUT, acoustic characteristics, GTSL, diver, ETSI Combinational tests for telephone terminal equipment Combinational tests for telephone terminal equipment combinational tests, terminal equipment, test system, electrical test, telecommunicaitons, open test platform, CompactTSVP

26-Apr-2006

The R&S®SFU broadcast test system is used as a reference signal generator to simulate the influence of LTE and other mobile radio signals on digital TV signals and receivers.

20-Jun-2012

With a Rohde & Schwarz oscilloscope

19-Jun-2019

Verifying 5G transmitted signals in the field with the R&S®Spectrum Rider FPH handheld spectrum analyzer

30-Jul-2024

DECT standard ETS 300 175-2 prescribes among others measurement of the transmit power and the unwanted power in adjacent channels. Following a brief introduction into DECT, this Application Note describes the standard-conforming measurement of the normal transmit power NTP and the unwanted adjacent-channel power ACP using a spectrum analyzer from the FSE family ( firmware version 1.63 and higher). Option FSE-B7 (Vector Signal Analyzer) is required for measuring the normal transmit power NTP since the signal must be demodulated for this measurement. Due to the wide dynamic range of FSEA20 and FSEA30, the adjacent channel power ACP can be measured without bandpass filters suppressing the transmit channel. Option FSE-B7 is not required for measuring the adjacent-channel power.

28-Apr-1998 | AN-No. 1EF42

Gated spectrum method with the R&S®PR200

03-Feb-2020

The present R&S®SMW-K503/-K504 Interface Control Document contains information on- the R&S descriptor word format, including pulse descriptor words and timed control descriptor words in basic and expert mode- Timing requirements and limitations of the real-time control interface- Properties of the ADV DATA/CTRL network interfaceIt is intended for use by customers using descriptor words to control the R&S®SMW200A in real-time. The interface control document specifies the interface between the customers hardware used for provision of descriptor words and the R&S®SMW200A ADV DATA/CTRL interface. Additional information on descriptor word processing inside the R&S®SMW200A is provided.

25-Aug-2021 | AN-No. 1GP133

This application card examines the best practices for testing video service quality over mobile networks and discusses the different types of video services and recent changes in video streaming.

18-Apr-2024

Phase difference is the key parameter when characterizing direction finding (DF) scenarios. To analyze DF equipment, the phase difference needs to be determined before measuring other parameters such as the bearing. The R&S®VSE-K6A multichannel pulse analysis software in combination with a Rohde & Schwarz oscilloscope provides phase difference measurements even in challenging environments, utilizing the test equipment’s advanced trigger capabilities.

02-Mar-2021

TETRA, the TErrestrial Trunked RAdio, is the professional mobile radio standard (PMR) used world wide by governmental safety and security authorities and organizations, as well as by private utilities from energy suppliers through to transport. Rohde & Schwarz provide test instruments idealy suited for both the development and production of TETRA base stations and user equipment, as well as for network planning, network coverage and quality of service, network monitoring and optimization, maintenance, and service. This Application Note shows examples for measurements with R&S instruments covering the entire range of TETRA test requirements.

26-Apr-2013 | AN-No. 1MA189

This application note describes how to generate GSM signals for wide ranging receiver tests under fading conditions for GSM/GPRS/Edge. The test setup requires an R&S®CMU Radio Communication Tester with IQ-IF interface option CMU-B17 and an R&S®SMIQ vector signal generator or baseband fading simulator ABFS for generating GSM. The GSMFadLevCor program included with this application note performs a semi automatic level correction of the power fed to the Device Under Test (DUT).

28-Aug-2009 | AN-No. 1MA60

The specialized R&S®MULTI-MOTION test sequences offered by the R&S®DVSG Digital Video Signal Generator permit a reproducible quality analysis of deinterlacing and motion portrayal for digital television (TV) displays. This makes it possible to study all potential degradations resulting from the progressive conversion separately. It also allows the various motion artefacts resulting from liquid crystal (LCD), plasma (PDP), and digital micromirror (DMD) technologies to be quantified. This application note explains how to draw specific conclusions from the sequence output on the test display.

01-Dec-2008 | AN-No. 7BM74

The Bluetooth® wireless standard has been an unparalleled success. It has found its way into virtually all smartphones, PCs, cars, entertainment hardware and wearables. Bluetooth SIG reports that more than 8 billion devices are currently in use. Bluetooth supports Internet of Things (IoT) technologies and direction finding methods, making it a sure bet for the future as well.This white paper summarizes the various Bluetooth technologies with a focus on the physical layer in line with core specification version 5.1.

05-Jun-2019 | AN-No. 1MA108

TS-EMF2 TS-EMF TRD Conversion TRD Conversion TS-EMF2 TS-EMF TRD Conversion

25-Jan-2007 | AN-No. TS-EMF2

The voltage standing wave ratio (VSWR) is one of the parameters in RF systems that measures the impedance mismatch. Under ideal conditions, when the load is perfectly matched to the source, the VSWR will be 1. A mismatch in the system causes reflections that will increase the VSWR and lead to losses in transmission. Although most RF components are typically designed and specified with a characteristic impedance of 50 Ω , applications and system components for cable television are designed and specified with a characteristic impedance of 75 Ω . This application note describes the measurement procedure for VSWR measurements in 75 Ω systems using the R&S®FSH3-TV handheld TV analyzer.

01-Mar-2008 | AN-No. 7BM72

The simple network management protocol (SNMP) can be used in a wide range of applications, as described in Rohde & Schwarz Application Note 7BM65 “The Simple Network Management Protocol: Remote Controlling for Monitoring Devices“. In particular, the option of centrally managing monitoring sensors – such as the R&S DVM for RF and baseband signals in digital broadcasting – shows the potential of this technology. However, the protocol alone is not enough to achieve this management functionality. Specialized management applications are needed that carry out the SNMP requests and display the results graphically. This application note and the associated SNMP example application will show how the R&S DVM family can be used for this type of application. Rohde & Schwarz customers can use the included source code (programming language: C#) to make the modifications needed for their own situations.

31-May-2007 | AN-No. 7BM66

Over-the-air (OTA) beamforming testing

04-May-2018

The R&S®CMU200 provides the signals required for 2nd order intermodulation (IM2) performance verification for WCDMA / CDMA2000 chipsets with zero IF design.This application note is a guide to configure the R&S®CMU200 for such an application.

16-Dec-2004 | AN-No. 1CM54

The R&S®RTB2000 digital oscilloscope lets you share your scope’s display with any computer/projector via LAN or Internet. The oscilloscope comes with an RJ-45 Ethernet jack and a built-in web server (as standard). The screen is displayed via a direct connection to a PC, via LAN or over the Internet.

21-Mar-2017

The new WiMAX radio technology - worldwide interoperability for microwave access - is based on wireless transmission methods defined by the IEEE 802.16 standard. WiMAX has been developed to replace broadband cable networks such as DSL and to enable mobile broadband wireless access. Rohde & Schwarz offers a complete test solution for WiMAX applications by combining its Signal Generator R&S SMU200A and Signal Analyzer R&S FSQ plus the appropriate options.RuS_WiMAX_OFDM is a 10 minutes video on WiMAX OFDM measurements.Please see also 1MA96 for General information about the WiMAX standard and 1MA97 for Generating and analyzing 802.16-2004 and 802.16e-2005 signals.

11-Jul-2006 | AN-No. 1EF57

Radar technology is essential for state-of-the art and future vehicles on the path to full autonomous driving. Radar sensors deliver critical information about the surrounding traffic environment or monitor the interior of the vehicle. As safety-relevant parts, radar sensors must adhere to specifications and regulations.

12-Dec-2022

In car-to-car communications scenarios, fading is always present and has an enormous impact on the received signal. The R&S®SMW200A vector signal generator lets you perform the most accurate and reproducible receiver tests under car-to-car fading conditions. The required car-to-car radio channel models have been extracted from real field trials and specified by the CAR 2 CAR Communication Consortium. Now it is possible to verify receiver performance under controlled conditions in the lab.

06-Nov-2017

Recent mobile test methods could not evaluate the quality of data reduced speech signals with different coded and decoded signals. The Perceptual Evaluation of Speech Quality (PESQ) provides the solution for this measuring problem. GSM PESQ is an add-on tool for CMUgo for automatic measurement of the PESQ for GSM mobile phones according to recommendation ITU-T P.862.1 featuring selectable fading profiles, frequency hopping sequences and variable Additional White Gaussian Noise (AWGN).

05-Jan-2012 | AN-No. 1MA119

There are proposals for broadband measurements on hearing aids, for example the proposed standard ANSI S3.42. Such measurements are intended to simulate more accurately the behaviour of hearing aids under normal hearing conditions also in the presence of ambient noise. Audio Analyzer UPD fitted with High-Speed Option UPD-B3 makes it possible already now to generate the proposed test signal and to perform all the related measurements including coherence and transfer functions. These measurements may become more and more important in the future but have scarcely been performed up to now as they require highly complex test equipment. Audio Analyzer UPD enables the user to measure to tomorrow’s standards even today.

04-Jun-1998 | AN-No. 1GA34

Application Note 1MA68 has been replaced by .

10-Dec-2008 | AN-No. 1MA68

O-RAN radio units (O-RU) contribute significantly to the high power consumption of 5G networks. Making O-RUs energy efficient without sacrificing O-RAN innovations is a top priority.

19-Mar-2024

Analysis, 5G FR1 MIMO signals, R&S®NRQ6, R&S®VSE Measurement of the phase difference between the MIMO layers is a challenging task in the design of 5G base stations. However, this measurement and its analysis can be easily accomplished using the R&S®NRQ6 frequency selective power sensor and R&S®VSE signal explorer software. Analysis of 5G FR1 MIMO signals with R&S®NRQ6 and R&S®VSE Analysis, 5G FR1

14-Jan-2022