Receiver diversity improves reception quality by using multiple antennas with a preferably low correlation factor between each other. This results in a more robust handling of multipath signals, since a deep fade will then not affect all received signals at the same time. However, the compact dimensions of handheld devices can introduce unwanted correlation due to their dense antenna spacing. In this case, the popular diversity test setup consisting of several independent transmitters will no longer serve the needs of a realistic simulation, since correlation effects have to be taken into account here. A clever solution is to operate the R&S®SFU in split-fading mode in combination with a second transmitter. This can be another R&S®SFU, the R&S®SFE, the R&S®SFE100 or the R&S®SMU200A. In this way, two diversity signals of adjustable correlation for any common broadcast standard are coded in realtime, while their individual multipath profile is precisely specified by the extensive features of the R&S®SFU fader module.

19-Oct-2012 | AN-No. 7BM76

R&S®NRPView has been replaced by software Power Viewer Plus, which is provided together with software R&S®NRP Toolkit.Please use the link given below to download R&S®NRP Toolkit.

18-Dec-2008 | AN-No. 1MA77

Getting started with IQ Streaming Application

The intention of this Application Note is to provide an overview of all necessary tasks for getting along with successful IQ Streaming.The necessary technical requirements are described as well as the streaming parameters of the IQ data stream.The general operation and basic setup of the MSR4 is described in the user manual and is not part of this document.

28-Mar-2023 | AN-No. 1179.7104.02

The measurement of error vector magnitude (EVM) is relative – but what is the reference?

02-Mar-2020

Rare faults and intermittent signals are difficult to capture. The R&S®RTO Oscilloscope supports the acquisition and the detailed signal analysis of these signals by using the history mode. The history mode allows the user to look back to previous acquisitions and apply the wide set of analysis functions of the RTO. Furthermore it stores the accurate recoding time of the waveforms for subsequent analysis.

03-Jun-2013 | AN-No. 1TD02

DVB-T can be used for stationary, portable and – using the diversity technique – also mobile reception. Stationary reception via a Gaussian channel and a fixed Yagi antenna on the roof usually poses no problems. This is different with portable reception, for example on a park bench, if there are moving objects in the vicinity of the receiver that has been put up for optimal reception. These may be persons or any kind of vehicles that – while passing by the receiver - generate different types of reflections. With mobile reception, for example when driving on a motorway, poor receiving conditions have the most detrimental effect. Receiving conditions can be considerably improved by employing several antennas, a technique that is referred to as antenna diversity. This application note discusses the improvements that can be achieved with antenna diversity and explains how to simulate a DVB-T channel with the required characteristics by means of TV Test Transmitter R&S SFQ.

31-Jul-2003 | AN-No. 7BM06

This application note describes how the transmitter landscape of a DVB-T2 single-frequency network (SFN) can be simulated in multiple input single output (MISO) mode in order to test the compatibility and performance of receiver modules. Neither an external T2-MI gateway nor a GPS receiver is required - just an R&S®BTC equipped with two RF paths. Alternatively, one R&S®SFU coupled with one or more R&S®SFU, R&S®SFE, R&S®SFE100 or R&S®SFC can also be used. R&S®ETL or R&S®ETC are suggested to fine-tune the synchronization between the generated RF signals.

03-Feb-2014 | AN-No. 7BM80

World’s first fully electronically steerable antenna array.

27-Jun-2023

7BM37 MPEG2,DVRG,Broadcasting,DTV Transfer of Video Stream Files to and from DTV Recorder Generator DVRG Transfer of Video Stream Files to and from DTV Recorder Generator DVRG 7BM37 MPEG2,DVRG,Broadcasting,DTV Transfer of Video Stream Files to and from DTV Recorder Generator DVRG

31-Jul-2003 | AN-No. 7BM37

- not available -

20-Jul-2001 | AN-No. 7BM16

This application note is to provide a basic understanding as to the configuration and control of DVQ via an Ethernet link.

26-Apr-2001 | AN-No. 7BM04

As part of Release 13, 3GPP has specified a new radio interface, the Narrowband Internet of Things (NBIoT). NB-IoT is optimized for machine type traffic. It is kept as simple as possible in order to reduce device costs and to minimize battery consumption. In addition, it is also adapted to work in difficult radio conditions, which is a frequent operational area for certain machine type communication devices. Although NBIoT is an independent radio interface, it is tightly connected with LTE, which also shows up in its integration in the current LTE specifications.In this whitepaper we introduce the NB-IoT technology with an emphasis on the tight connection to LTE.

08-Aug-2016 | AN-No. 1MA266

This Application Note describes the operating principle of DME (Distance Measurement Equipment) that is used for distance measurement in aviation. It also describes various test scenarios for the maintenance of a DME transponder. These tests require an R&S®SMA100A signal generator with R&S®SMA-K26 DME modulation option, and an R&S®NRP-Z81 wideband power sensor.

26-Feb-2009 | AN-No. 1GP74

For several years, automobile makers and government agencies have sought ways to improve safety on roadways and effectively manage traffic flow. As wireless communication systems are advancing, the vision of automobiles talking to each other and to roadside units is becoming a reality. These planned automotive wireless communication systems are known as ITS (Intelligent Transportation System). This paper will provide an overview of the current status of the ITS worldwide with a focus on the IEEE 802.11p PHY. Additionally, the paper provides information on test and measurement solutions for devices and components used in ITS.

23-Jan-2014 | AN-No. 1MA152

All digital oscilloscopes are temporarily blind. During this blind time the user will miss critical signal events at his device under test. Thus, it is necessary to understand the impact of blind time to the measurement. This application note explains the background of blind time and points out why a high acquisition rate is important. It furthermore explains the R&S RTO oscilloscope capabilities and how they help for faster debugging, measurement and analysis.

17-May-2011 | AN-No. 1ER02

Rohde & Schwarz test receivers of the ESXS, ESS and ESXN series are equipped with a 3.5' floppy-disk drive so that receiver settings, scan results, limit lines, transducer factors and whole sets of transducers can be stored on a floppy disk and reloaded into the receiver. Data can only be loaded into the receiver type from which they have been stored. The reason is that data eg from an ESHS30, which operates in the frequency range from 9 kHz to 30 Hz, should not be loaded into an ESVS30 as the data of the two units may be incompatible to because of the different frequency ranges alone (ESVS30: 20 MHz to 1000 MHz). However, in some cases it may be desirable to load an ESVS20 file into an ESVS30, or an ESN file into an ESVN40.

18-Jan-2002 | AN-No. 1EE19

- not available -

20-Jul-2001 | AN-No. 7BM20

This whitepaper provides an overview of the WLAN offload in LTE as standardized by 3GPP, as well as the enhancements for Wi-Fi standardized by IEEE and the Wi-Fi Alliance. It also describes access methods in the joint network, treats the security, and describes IP mobility. In addition network discovery and selection are explained.

10-Dec-2012 | AN-No. 1MA214

Determining the field strength from transmitted power is not an easy job. Various, quite complicated formulas have to be evaluated correctly. This application note explains, how to calculate electric and magnetic field strength and power flux density. A program associated to this application note helps to do the calculation and converts Watts to mW and dBm, V/m to mV/m and dBmV/m as well as A/m to mA/m and dBmA/m. Additional applications are calculation of propagation loss or antenna factors.

10-Dec-2018 | AN-No. 1MA85

This application note describes how noise figure and gain of amplifiers or converters in the microwave range from 50 GHz to 67 GHz are measured. For this purpose the R&S FSU67 spectrum analyzer is equipped with application firmware R&S FS-K30 in combination with the Noisecom NC5115-60G, or NC5115-60GT Noise Figure Test Set.

12-May-2009 | AN-No. 1EF64

The option R&S®EMC32-K23 extends the emission measurement of the EMI Auto Test (R&S®EMC32-K10) with 3D measurement capabilities.This extension is useful to display the 3D radiation pattern of each frequency.This Application Notes shows all necessary settings for 3D measurement.

26-Aug-2014 | AN-No. 1SP08

This application note describes the testing of the sensitivity of DAB receivers according to the European Standard EN 50248 ‘Characteristics of DAB receivers’, using the test set 'Automatic DAB Receiver Test'.

11-Nov-2005 | AN-No. FTK03

- not available -

20-Jul-2001 | AN-No. 7BM13

The trigger is a key element of an oscilloscope. It captures specific signal events for detailed analysis and provides a stable view on repeating waveforms. Since its invention in the 1940s the oscilloscope trigger has experienced continuous enhancements. The fully digital trigger of the R&S®RTO digital oscilloscopes sets an innovation milestone that brings significant advantages for the oscilloscope user in terms of measurement accuracy, acquisition density, and functionality. This application note introduces the working principles of a conventional trigger system and explains the advantages of the real-time capable digital trigger of the RTO oscilloscopes.

11-Apr-2012 | AN-No. 1ER04

The present application note describes the possibilities of the Stream Explorer to be remotely controlled by some peripheral program via OLE. Extensions are also discussed, widening the fields of application of such a Client-Server architecture.

31-Mar-1999 | AN-No. 7BM02

Today, digital audio signals are transmitted via standardized interfaces not only in the form of continuous data streams but also increasingly as burst audio signals. This application note shows various ways of generating and analyzing such data bursts with Audio Analyzer UPD. In the applications described, the parameters word clock, bit clock and word length can be set over wide ranges. Single-channel and dual-channel audio data with bit clocks far into the MHz range can be processed.

05-Nov-1997 | AN-No. 1GA38

Broadcasting transmitters are subject to particularly stringent standards with respect to broadcast signal quality, because even small faults can lead to service disruptions for many listeners. A single instrument, the R&S®ETL TV analyzer, performs all required DAB transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commissioning and preventive maintenance.

24-Jul-2013 | AN-No. 7BM104

This application note is a programming guide. It briefly summarizes basic tips and information about SCPI programming for remote-controlling Rohde & Schwarz signal generators.

26-Apr-2013 | AN-No. 1GP79

This application note describes how to determine the uncertainty bounds for a given artificial network impedance for an estimate of the combined standard measurement uncertainty using the Rohde & Schwarz Software “AN Impedance Uncertainty Contribution”.

17-Dec-2010 | AN-No. 1EE23

High Speed Downlink Packet Access (HSDPA) and High Speed Uplink Packet Access (HSUPA) optimize UMTS for packet data services in downlink and uplink, respectively. Together, they are referred to as High Speed Packet Access (HSPA). Within 3GPP Release 7, 8, 9 and 10, further improvements to HSPA have been specified in the context of HSPA+ or HSPA evolution. This White Paper introduces key features of HSPA+ and outlines the changes to the radio interface.

14-Feb-2012 | AN-No. 1MA205