30 dBm + 30 dBm = 60 dBm? It is well known that it is not as easy as that.

This application note supplies a free of charge software tool that can be used to add or subtract an arbitrary number of powers. In addition, the software can be used to convert power and voltage units from the linear to the logarithmic scale (and vice versa), convert linear power and voltage ratios to decibels, and convert a VSWR to other reflection quantities.

10-Dec-2018 | AN-No. 1GP77

Rohde & Schwarz recognizes the potential risk of computer virus infection when connecting Windows®-based test instrumentation to other computers via local area networks (LANs), or using removable storage devices.This white paper introduces measures to minimize malware threats and discusses ways to mitigate risks while ensuring that instrument performance is not compromised.

16-Feb-2017 | AN-No. 1EB01

Starting from June 2017, almost all radio transmitters and receivers sold or put into operation in the European Union have to be tested for immunity against interferers in adjacent frequency bands. ETSI standard EN 303 340 defines the tests to be performed on digital television receivers and requirements to be passed.This application note describes the test procedures and provides save-recall files and interferer signals for the Broadcast Test Center R&S®BTC.

11-Jul-2017 | AN-No. 1GP116

Nearly all analog NTSC broadcasting has ended in the US, Canada and South Korea. The digital switchover to ATSC in Mexico is expected to be completed by the end of 2016. ATSC receivers must fulfill the recommendations described in “ATSC Recommended Practice: Receiver Performance Guidelines” (document A/74:2010) before they can be sold freely in the markets that have adopted the standard. In addition, Recommendation ITU-R BT.2036-1 (07/2016), titled “Characteristics of a reference receiving system for frequency planning of digital terrestrial television systems”, includes the planning factors for an ATSC reception system, with a reference to ATSC Recommended Practice A/74:2010, because operation is in a more dynamic environment.

29-Sep-2016 | AN-No. 1GP111

Since June 2017 almost all radio transmitters and receivers sold or put into operation in the European Union have to be tested for immunity against interferers in adjacent frequency bands. ETSI standard EN 303 345 defines the tests to be performed on broadcast sound receivers, and the requirements to be passed.This application note describes the test procedures and provides script files and interferer signals for the Broadcast Test Center R&S®BTC.

29-May-2020 | AN-No. 1GP117

This document provides information on how to perform manual testing based on current R&S TA-TRS QuickStep V4.05 platform in order to adapt to the new released EN 303 345 for broadcast sound receivers. It serves as a bridged document before new standard software package released by R&S for upgrade.

14-Apr-2021

Receiver diversity improves reception quality by using multiple antennas with a preferably low correlation factor between each receive path. The result is a much more robust reception, since a deep fade will not affect all received signals at the same time.However, the complex geometry and positioning constraints for antennas of the receiving devices can introduce an unwanted correlation between channels. The popular diversity test setup consisting of several independent transmitters does not serve the needs of a realistic simulation, because radio channel correlation is not simulated.This application note explains a compact and versatile MIMO test solution for any common broadcast standard with real time fading including the simulation of channel correlation for a 1x4 MIMO system.The test setup allows very precisely specified individual multipath profiles.

11-Oct-2017 | AN-No. 1GP114

The application note address test and measurement possibilities for DVB-S2 and DVB-S2X signals in the Ku & Ka -band. The AN includes detailed description of measurement setups, DVB-S2 and DVB-S2X signal generation, up-conversion and signal quality (Error Vector Magnitude and Modulation Error Ratio) analysis in the Ku & Ka-band using Rohde & Schwarz instruments.This paper is intended towards satellite equipment manufacturers, network operators, government & authorities, CE receiver chip set manufacturers, car manufacturer and automotive infotainment system manufactures.

08-Mar-2016 | AN-No. 1MA273

The R&S® Broadcast Test Center BTC supports the new “Next Generation Broadcast Standard ATSC 3.0” with BTC firmware version 2.20 and later.This application note describes the necessary settings in the user interface of the R&S® Broadcast Test Center BTC.

27-Mar-2018 | AN-No. 1GP119

Broadcasting transmitters are subject to particularly stringent standards with respect to broadcast signal quality, because even small faults can lead to service disruptions for many viewers. A single instrument, the R&S®ETL TV analyzer, performs all required ISDB-T transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commissioning and preventive maintenance.

13-May-2013 | AN-No. 7BM103

Despite the advent of advanced digital transmission methods, analog broadcasting remains highly important. Until now, measurements on FM transmitters in connection with acceptance testing, commissioning and maintenance required using a variety of T&M instruments.The R&S ETL TV analyzer combines these instruments' capabilities in a single unit and can completely replace them. Now, for the first time, acceptance test measurements can be conducted on FM transmitters quickly and easily using just one compact test instrument. The R&S ETL provides the functionalities of a power meter, spectrum analyzer, audio generator, FM measurement demodulator, stereo decoder, audio analyzer and more in just one box.

10-Sep-2013 | AN-No. 7BM105

With the rise of Low Earth Orbit (LEO) and Medium Earth Orbit (MEO) satellite constellations for broadband data connectivity over the last few years, the need to dynamically simulate the channel between the satellite and user equipment (UE) or the satellite and the ground station (GS) has grown at a staggering pace. The satellite channel is subject to various atmospheric effects and the relative motion between the satellite and UE, resulting in frequency and level variations that depend on the satellite's position in the sky. Consequently, it is essential for manufacturers of related receivers and other hardware components to consider these effects during the design and production phases to ensure optimal performance and reliability.In this application note, the focus will be on giving an overview of the functionalities of the R&S Space Nexus and explaining how to use the software to create realistic fading files out of a given Two Line Elements (TLE) file that is describing the trajectory of a satellite. Afterwards the approach for using this file to simulate a realistic satellite fading scenario using the R&S®SMW200A equipped with a R&S®SMW-K820 (custom dynamic fading option), is explained

03-Feb-2025 | AN-No. 1GP147

This application note belongs to a series of application notes which explains how to test EW receivers at RF in the lab with commercial, off-the-shelf signal generators and software. The series will cover all relevant use cases. This application note will discuss threat simulation and verification. Further application notes will address calibration and verification of multi-channel setups for simulation of angle of arrival, generation of radar signals in a hardware in the loop (HIL) environment with PDW Streaming, and automated threat creation and sequencing.

23-Mar-2021 | AN-No. 1GP123

3GPP Release 9 Technical Specification (TS) 37.141 covers multistandard radio base station conformance testing. Multistandard radio includes four standards of mobile communications: GSM, WCDMA, TD-SCDMA, and LTE. This application note introduces the concept of multistandard radio base stations as well as solutions for transmitter and receiver tests based on Rohde & Schwarz signal generators and Rohde & Schwarz signal and spectrum analyzers.

06-Jul-2012 | AN-No. 1MA198

IEEE 802.16m is an amendment to the release IEEE 802.16-2009 standard. The goal set out in 802.16m is to develop an advanced air interface to meet the requirements for IMT-Advanced next generation networks while still supporting legacy 802.16 OFDMA system. This white paper will focus on some of the key features of 16m and provide comparisons to the 802.16-2009 OFDMA PHY (also referred to as 16e) with explanations of the motivations behind for the advanced features in 802.16m.

29-Jul-2010 | AN-No. 1MA167

Getting EMI emissions under control is one of those tasks that R&D engineers do not enjoy doing . EMI must often be taken into consideration as early as the design phase, particularly in the case of power electronics systems with increasing switching speeds of wideband gap semiconductors. While EMI receivers or spectrum analyzers are always the preferred choice for these measurements, they are often not available as standard measurement equipment in the R&D lab. To allow optimization early on in the R&D lab, Rohde & Schwarz provides a free tool to simplify conducted emissions debugging using oscilloscopes.

27-Sep-2021 | AN-No. 1SL372

This document provides an introduction to SDR as used for military radios and presents the relevant T&M solutions offered by Rohde & Schwarz.

15-Sep-2012 | AN-No. 1MA206

This Application Note focuses on measurement of harmonics using modern spectrum analyzers. It highlights the source of harmonics before focusing on their measurement using a spectrum analyzer. The Application Note also explains the benefits of the R&S FSW’s high pass filter option for harmonic measurements.

02-Mar-2012 | AN-No. 1EF78

Although the commercialization of LTE technology began in end 2009, the technology is still being enhanced in order to meet ITU-Advanced requirements. This white paper summarizes these necessary improvements, which are known as LTE-Advanced.

20-Aug-2012 | AN-No. 1MA169

- not available -

05-Aug-2010 | AN-No. 7BM26

This application note presents the Jitter analysis capabilities of the R&S®RTO for digital signals. It demonstrates the basic operation with an application example, and shows the associated jitter analysis.

29-Aug-2013 | AN-No. 1TD03

Widespread adoption of higher order modulation schemes, larger signal bandwidths and higher operating frequencies, to enable higher data throughput in communication links like 5G, places increasingly tough demands on the frontend. Signal fidelity is often enhanced with linearization.The greater number of RF chains and signal bandwidth in 5G Frontends mean that DPD (Digital Pre-Distortion) may no longer be the default linearization choice; 5G Frontends will be completely different from their 4G predecessors.The key metrics of Efficiency, Linearity, Bandwidth and Output Power remain, as does the question of how to optimally create the signal with just enough fidelity and power, with a minimum of wasted power. The solution set to that question, however, has never been greater.Amongst other topics, this White Paper, (i) proposes a classification of Linearization schemes, (ii) introduces the hard limiter, (iii) illustrates linearization of an exemplary mmWave PA using non-DPD techniques, and (iv) introduces a class of linearized transmitters that create their signal and linearity from efficiently generated components.

25-Feb-2016 | AN-No. 1MA269

The new R&S®DATA-NPT mobile network performance test from Rohde & Schwarz brings innovation to network performance testing. The patent-pending testing solution is a very compact and resource-saving implementation of a new measurement procedure that simultaneously measures the maximum data capacity and the minimum continuous connectivity in a mobile network.

21-Apr-2016

The LTE technology as specified within 3GPP Release 8 was first commercially deployed by end 2009. Since then the number of operators implementing the technology is strongly increasing around the globe. LTE has become the fastest developing mobile system technology. The same way GSM and WCDMA have been enhanced with additional features over time, LTE is continuously worked on. Initial enhancements have been included in 3GPP Release 9 and are described in this white paper.

19-Dec-2011 | AN-No. 1MA191

Spectrum that was previously reserved for TV broadcasting is being freed up in many countries for use under the new Long Term Evolution (LTE) mobile radio standard (keyword: 'digital dividend'). As a result, numerous coexistence scenarios are possible. So network operators and manufacturers from both the mobile radio and the broadcast sector have a vital interest in avoiding any interference and performing in-depth testing of their products. Rohde & Schwarz offers a wideranging product portfolio for such applications. This Application Note presents Test & Measurement equipment for the broadcast and mobile radio sector and discusses some possible test setups.

08-Dec-2011 | AN-No. 1MA176

In frequent cases, it appears that the MPEG2 decoder is not located in the control/monitoring room. The present application note describes how to operate a remote control of up to four DVMDs over an ethernet link.

31-Mar-1999 | AN-No. 7BM01

Coaxial connectors are a key component in RF and microwave applications. Their importance and contribution to overall system performance is sometimes overlooked. This application note focuses on coaxial connectors found in RF and microwave applications, providing general information on the available types; how to take care of connectors and connector electrical properties. This information is essential for anyone specifying and using Rohde and Schwarz test and measurement equipment and will help with the selection of the correct types of coaxial connector, handling connectors to obtain accurate and repeatable measurements, and to maximize the longevity and performance of coaxial connectors.

09-Apr-2015 | AN-No. 1MA99

Audio Analyzers UPD and UPL with their large variety of functions provide practically all measurement procedures required in audio technology. Thanks to the Universal Sequence Controllers UPD-K1 and UPL-B10, which are available as options, the user is able to considerably expand the range of functions to suit his particular requirements. It is possible, for instance, to add complete measurement functions - eg measurement of ohmic resistance - and to read out, convert or reload sweep results or to add new scale labelling (eg group delay). Another example is the analysis of sweep curves and the display of results in a window next to the curve. As far as softkey labelling and functions are concerned, operation of the sequence control programs is analogous to the softkey control of the UPD/UPL graphics display.

04-Jun-1998 | AN-No. 1GA16

1xEvolution – Data Optimized (1xEV-DO)is a 3GPP2 “cdma2000® High Rate PacketData Air Interface” specification. Since its introduction (Release 0), Revisions A and B have brought improvements in the data throughput in both directions and in the overall network capacity. This white paper presents the Revision A and B concepts for 1xEV-DO and explains key features.

23-Sep-2013 | AN-No. 1MA213

This application note describes how to configure a Rohde & Schwarz Network Analyzer to make spectral measurements directly on a device under test.

16-Mar-2012 | AN-No. 1EZ62