This application note describes Methods of Implementations (MOI) for precise, fast and error-free compliance testing of high-speed backplanes and direct attach copper cables (DAC) according to IEEE 802.3bj, IEEE 802.3by, IEEE 802.3cd and IEEE 802.3ck, based on 25 Gb/s, 50 Gb/s and 100 Gb/s signaling per lane with vector network analyzers from Rohde & Schwarz.

07-Apr-2021 | AN-No. GFM356

Simulation can be a big time-saver when designing EMI filters for DC/DC converters. Power supply control chip vendors offer various filter design tools that provide reasonable design choices for filter simulation before any hardware prototype is available. However, simulated results can differ significantly for different tools if simulated models are not accurate or do not cover all the relevant components. Performing a hardware measurement to evaluate the effectiveness of a simulated EMI filter is therefore indispensable.

21-Sep-2021

Rohde & Schwarz signal generators present a compact easy-to-use solution for generating phase coherent signals. Different generator models can be coupled to optimally fit user requirements in terms of number of phase coherent channels and RF frequency range.This application note explains how to generate phase coherent signals, details what to consider and how to best calibrate the relative phases and timing between the individual channels. This document also presents various measurements of the phase stability over time for different RF frequencies.

07-Sep-2016 | AN-No. 1GP108

The SGMA products from Rohde & Schwarz are optimized for use in production and automated applications. Their key characteristics are high speed and a compact design. The instruments are also an ideal enhancement for the R&S®SMW200A in MIMO applications. They can interface to the high-end vector signal generator and serve as additional RF outputs. This application note explains how to connect and interface with the SGMA instruments and gives some recommendations and hints about their use. It helps the user to get started and to understand how the instruments interact.

15-Oct-2015 | AN-No. 1GP103

GSM Adaptive Multi-Rate (AMR) tests can be performed by using the R&S CMU300 as of software version V3.65. This document describes the scope of functions of the AMR Testing R&S CMU-K37 software expansion option.

26-Jul-2005 | AN-No. 1CM59

combinational tests, terminal equipment, test system, electrical test, telecommunicaitons, open test platform, CompactTSVP, DUT, acoustic characteristics, GTSL, diver, ETSI Combinational tests for telephone terminal equipment Combinational tests for telephone terminal equipment combinational tests, terminal equipment, test system, electrical test, telecommunicaitons, open test platform, CompactTSVP

26-Apr-2006

In modern telephoning, dual-tone dialling is used more and more often. Every symbol to be transmitted is coded by two frequencies which are sent at the same time. To ensure a trouble-free call setup, transmission has to be done within defined tolerances. For measuring these kind of dialling signals, the measurement equipment has to fulfill high requirements. This application note describes how the measurements can be carried out by using the Audio Analyzers UPL or UPD. It also presents a measuring program for this application.

04-Jun-1998 | AN-No. 1GA23

The R&S®SFU broadcast test system is used as a reference signal generator to simulate the influence of LTE and other mobile radio signals on digital TV signals and receivers.

20-Jun-2012

With a Rohde & Schwarz oscilloscope

19-Jun-2019

Verifying 5G transmitted signals in the field with the R&S®Spectrum Rider FPH handheld spectrum analyzer

30-Jul-2024

This application card examines the best practices for testing video service quality over mobile networks and discusses the different types of video services and recent changes in video streaming.

18-Apr-2024

The present R&S®SMW-K503/-K504 Interface Control Document contains information on- the R&S descriptor word format, including pulse descriptor words and timed control descriptor words in basic and expert mode- Timing requirements and limitations of the real-time control interface- Properties of the ADV DATA/CTRL network interfaceIt is intended for use by customers using descriptor words to control the R&S®SMW200A in real-time. The interface control document specifies the interface between the customers hardware used for provision of descriptor words and the R&S®SMW200A ADV DATA/CTRL interface. Additional information on descriptor word processing inside the R&S®SMW200A is provided.

25-Aug-2021 | AN-No. 1GP133

Sequencer Software Tool

20-Feb-2015

This White Paper provides a more detailed view on radar waveforms for Aerospace and Defence and commercial radar systems. Waveforms such as pulse and pulse-Doppler signal, continuous wave and frequency shift keying waveforms are described. It also shows continuous waveform trends designed for specific needs and application differences of continuous wave radar compared to pulse radar systems.

31-Aug-2015 | AN-No. 1MA239

This application note describes how to generate GSM signals for wide ranging receiver tests under fading conditions for GSM/GPRS/Edge. The test setup requires an R&S®CMU Radio Communication Tester with IQ-IF interface option CMU-B17 and an R&S®SMIQ vector signal generator or baseband fading simulator ABFS for generating GSM. The GSMFadLevCor program included with this application note performs a semi automatic level correction of the power fed to the Device Under Test (DUT).

28-Aug-2009 | AN-No. 1MA60

TS-EMF2 TS-EMF TRD Conversion TRD Conversion TS-EMF2 TS-EMF TRD Conversion

25-Jan-2007 | AN-No. TS-EMF2

The Universal Radio Communication Tester R&S®CMU200 can perform most of the CDMA2000 1xEV-DO access terminal (AT) tests specified in the standard IS-866-A on its own. Some tests require additional instruments. This application note shows how to perform these tests easily with the remote-control software CMUgo, using the R&S®CMU200 in combination with R&S®SMU, R&S®AMU, R&S®SMJ or R&S®SML signal generators, and R&S®FSQ, R&S®FSU, R&S®FSP, R&S®FSL or R&S®FSMR spectrum analyzers.

05-Jan-2012 | AN-No. 1MA123

This application note provides basic information about frequency and phase settling time measurements and how the measurement is implemented inside modern phase noise analyzers.Measurement examples show the possibilities of this measurement feature and help the user to understand and use this method.

28-Jun-2018 | AN-No. 1EF102

With all these new flexibilities introduced with 5G, the radio access has become more complex to understand and analyze. More network interfaces and RAN configuration parameters have to be managed and the RAN and in particular the connection control, mobility and measurement reporting are decisive for the network performance. It will be vital for the system experts and radio engineers to gain knowledge and evolve their methods and tools to facilitate the work to optimize and troubleshoot 5G and 4G RAN performance. Thus, tools are needed that allow for easier understanding of the message flows in the radio protocols. The R&S®ROMES4 KPIs and Smart Events will help doing the work much easier and quicker. They are defined for a key set of LTE, EN-DC and NR RRC connection control and mobility procedures where the performance is crucial to achieve high quality network performance. Trouble shooting problematic cases and optimization of RAN protocols are key drivers to improve the mobile network performance with R&S®ROMES4.

28-Jun-2022 | AN-No. 8NT06

conducted conformance testing according to TS 38.141-1, Rel. 15

3GPP defines the Radio Frequency (RF) conformance test methods and requirements for 5G NR Base Stations (BS) in the technical specifications TS 38.141. This application note describes how all mandatory RF receiver tests (TS 38.141-1, chapter 7), according to Release 15, can be performed quickly and conveniently with signal generators from Rohde & Schwarz by either choosing manual operation or a remote control approach. Moreover, one test case requires a signal or spectrum analyzer from Rohde & Schwarz which is highlighted seperately in the corresponding chapter.In Addition, a new Python software library comes with this application note to enable the remote control approach of base station testing. This example requires the RsInstrument module which can be found on pypi.org or installed via 'pip' and is provided as is.

02-Dec-2020 | AN-No. GFM314

Rohde & Schwarz signal and spectrum analyzers equipped with the R&S®FSx-K30 option form the basis of a solution to accurately measure the noise figure in the millimeterwave frequency range using the Y-factor method.

17-Jul-2017

Increasing data rates in high-speed digital designs and wireless communications require SerDes PLLs and clock synthesizers with low additive phase noise and high jitter attenuation. Modern designs often follow a two-stage architecture, consisting of a jitter-attenuator and a frequency-synthesizer stage. Due to their high phase noise sensitivity, phase noise analyzers are the instruments of choice for these tests. To stimulate the PLL, an additional signal source with ultra low phase noise is required.

01-Aug-2018

Crucial for proper operation of mobile networks. Part 4 of the series on Cable and Antenna verification

Critical Infrastructure: Mobile base stations rely on a complex interplay of components, including often-overlooked elements like filter combiners, RF splitters and tappers, and cables, to deliver uninterrupted mobile communications.Vulnerability to Environmental Factors: Filter combiners, accessories, and cabling in mobile base stations are susceptible to harsh environmental stressors, which can lead to signal degradation and reduced system availability.Fundamental Properties: The functional integrity of mobile base station components is measured against key RF parameters, including frequency response and insertion loss, to ensure conformance to manufacturer and industry standards (e.g., 3GPP, ETSI).Measurement Techniques: Systematic and comprehensive testing is essential to validate the functional integrity of critical mobile base station components, detect latent defects, and optimize overall system performance.

09-Jan-2025 | AN-No. 8NT20

There are proposals for broadband measurements on hearing aids, for example the proposed standard ANSI S3.42. Such measurements are intended to simulate more accurately the behaviour of hearing aids under normal hearing conditions also in the presence of ambient noise. Audio Analyzer UPD fitted with High-Speed Option UPD-B3 makes it possible already now to generate the proposed test signal and to perform all the related measurements including coherence and transfer functions. These measurements may become more and more important in the future but have scarcely been performed up to now as they require highly complex test equipment. Audio Analyzer UPD enables the user to measure to tomorrow’s standards even today.

04-Jun-1998 | AN-No. 1GA34

This application note provides information how to perform noise figure measurements under pulsed or bursted conditions with spectrum analyzers and noise sources, and introduce the capabilities of the Rohde & Schwarz FSW signal and spectrum analyzer to perform this measurement.

28-Jun-2018 | AN-No. 1EF103

Application Note 1MA68 has been replaced by .

10-Dec-2008 | AN-No. 1MA68

Automotive Infotainment Testing

19-Feb-2018

The converters offered for the R&S® ZVA family extend the vector network analyzers' frequency range to include the millimeter-wave range (EHF band). This Application Note describes the R&S® ZVA-Z110 converters. They cover the W band (75 GHz to 110 GHz). Several measurement examples are included, explaining in detail how to configure a converter-based vector network analyzer system.

09-Oct-2007 | AN-No. 1EZ55

The CMD 57/59 output level for BER measurement can be calibrated to high accuracy to match GSM 11.21, (with modulated signals and adjacent timeslots + 50 dB above the used timeslot) using a simple test setup containing an NRVD power meter and an FSE spectrum analyzer.

10-Mar-2000 | AN-No. 1MA24

The R&S®SMF100A microwave signal generator offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace signal generators, e.g. from other manufacturers, with the R&S®SMF100A without having to change the remote control code. This application note describes how to use the remote emulation feature in general. Furthermore, it describes in detail the remote emulation for each supported instrument, limitations of the individual emulations and the remaining differences between the emulated and the original commands.

11-Oct-2016 | AN-No. 1GP92