1148 Results
Dashboard providing an overview over available power supplies and meters, and over installed application programs
13-Sep-2024 | AN-No. 1GP140
application program for battery model generation from discharge data
21-Nov-2022 | AN-No. 1GP136
The LCR meters R&S®LCX100 and R&S®LCX200 precisely measure the complex impedance and the resulting components values over a wide frequency range.
14-Mar-2022 | AN-No. 1GP132
Versatile Software Tool for Rohde & Schwarz Instruments
RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.
24-Dec-2017 | AN-No. 1MA074
This application note provides an application program and instructions for performing speech quality tests and delay measurements in a live network, using the R&S®UPV audio analyzer.
14-Dec-2017 | AN-No. 1GA68
The combination of R&S® CMU200 and R&S® UPV is in use for various tests of mobile phone speech functionality, such as acoustic tests according to 3GPP 26.132. This application note explains how to replace the R&S® CMU200 in these tasks with R&S® CMW500.
25-Jul-2014 | AN-No. 1GA65
This application note explains the basics behind these properties and offers an application program for their measurement.
10-Jul-2012 | AN-No. 1GA61
This application note provides an application program for level alignment, test automation and reporting with PESQ, POLQA and delay measurements on the Audio Analyzer R&S®UPV or R&S®UPV66.
08-May-2013 | AN-No. 1GA62
The instrument setup provided in this application note allows to analyze a degraded speech signal stored into a wave file and to display its FFT spectrum and waveform.
05-Sep-2014 | AN-No. 1GA66
This application note shows how to configure the R&S®AREG800A with either R&S®AREG8-24/81 remote millimeter wave frontends or the R&S®QAT100 advanced antenna array.
19-Sep-2025 | AN-No. 1GP149
Handheld solutions from Rohde & Schwarz support a gated trigger, enabling users to separate uplink and downlink signals in the time domain.
18-Sep-2025
More freedom, less complexity: Vehicle in the loop testing reinvented
08-Sep-2025
This application note describes how to configure two outputs for a symmetric supply, providing both positive and negative rails. The instructions apply also to both discontinued and future multi-channel models of R&S® power supplies.
04-Sep-2025 | AN-No. 1GP144
Explore closed-loop testing for radar-based hardware and learn how Hardware-in-the-Loop (HIL) systems enable realistic validation of automotive radar sensors.
03-Sep-2025
Differential RF on-wafer measurements up to 110 GHz on MPI probe stations
14-Aug-2025
Three-port on-wafer mixer measurements up to the THz range on MPI probe stations
14-Aug-2025
CISPR 25 HV/LV Coupling Attenuation Measurements with R&S®ELEKTRA
31-Jul-2025 | AN-No. 1EE29
This application note provides a detailed guide on performing FCC KDB987594 D02 Test Cases K&L using R&S®CMX500 OBT, focusing on FCC regulatory compliance testing for devices operating in the 6 GHz band in US.It begins by discussing the FCC's initiatives to open the 6 GHz band for unlicensed use, emphasizing the importance of Automated Frequency Coordination (AFC) systems to manage power levels and avoid interference with incumbent services.The guide outlines specific requirements for device types 6CD and 6FX, which must adjust their power levels based on information in beacon of access point. It also delves into the technical aspects of WLAN power control mechanism according to IEEE 802.11 specifications, highlighting the complexity of power adjustment features for devices operating in the 6 GHz band.This guide explains the advantages of using the CMX500 OBT tester, which can emulate various WLAN signaling scenarios, including standard and low-power access points. It provides detailed procedures for conducting Test Cases K and L, which focus on demonstrating proper power adjustment based on associated access points and ensuring client devices adjust its power appropriately.
30-Jul-2025 | AN-No. 1SL416
Reverberation Chambers (RVC) have become popular as an alternative to Anechoic Chamber (AC) facilities for electromagnetic emission & immunity tests. Unlike AC, RVC reflects waves creating multipath environment. EMC testing using reverberation chamber is accepted in various EMC test standards across different industries. The RVC is cost effective allowing high field strength generation without excessive amplification needs, eliminates the need for complex positioning of antennas and DUTs increasing test speed and simulates real-world electromagnetic environments more accurately. To ensure accurate and efficient testing, specialized EMC test software is required for data acquisition, automation, and analysis. This application note describes how to setup Elektra and perform measurements in RVC.
24-Jul-2025 | AN-No. 1EE28
As DisplayPort evolves to support ultra-high resolutions and increased data rates, robust compliance testing is essential to ensure interoperability across devices and interconnects. This application note provides a structured overview of physical-layer testing for DisplayPort source transmitters and passive cables, aligned with VESA CTS v2.1. The note covers key test procedures using Rohde & Schwarz solutions, including oscilloscope-based measurement at standardized test points, automated test execution with ScopeSuite, and signal integrity debug via equalization and jitter decomposition. It further details cable characterization using mixed-mode S-parameter analysis on a Vector Network Analyzer (VNA), with support for simulated eye diagrams and TDR-based impedance diagnostics. Practical setup examples and product references are provided to help engineers perform repeatable, standards-compliant DisplayPort PHY validation.
16-Jul-2025 | AN-No. 1SL418
The R&S®ZNA vector network analyzer enables high-power amplifier testing under real operating conditions.
14-Jul-2025
Best practices for mobile network testing for mission-critical applications
Learn how to verify the performance of a business- and mission-critical private network for military use cases to proactively identify potential issues
02-Jul-2025 | AN-No. 8NT21
SA Mode According to 3GPP 38.521-1
Device certification for compliance with 3GPP specifications is a crucial step in the launch of 5G NR user equipment (UE). As the demand for high-performance connectivity continues to rise, ensuring that devices meet industry standards is essential for delivering reliable and efficient service. To ensure optimal modem performance, RF pre-conformance testing, also known as design verification, needs to be initiated early in the product development process. This approach enables teams to swiftly identify and address potential issues, minimizing delays and enhancing the overall quality of the final product.The R&S®CMX500 3GPP RF pre-conformance WebGUI solution offers a fast and intuitive platform for executing NR-FR1 Standalone (SA) test cases based on the 3GPP 38.521-1 specification. Its manual verification capabilities make it particularly well-suited for early-stage validation, debugging, and step-by-step verification of test cases, leveraging the comprehensive toolset provided by the R&S®CMX500 WebGUI. Test case procedures are optimized for R&D use cases, while using the most relevant configurations from the specification.This application note serves as a comprehensive guide for R&D professionals, detailing the setup, configuration, execution, and verification of selected 3GPP pre-conformance test cases with just a few clicks in the GUI. Please note that the test steps outlined in this document require the CMX-KC661B license (SA FR1 3GPP RF Test Scenarios), in addition to the NR signaling license CMX-KS600B and the NR FR1 measurement license CMX-KM600. All descriptions, configurations and limits are based on 3GPP TS38.521-1 V18.4.0 (2024-11).
25-Jun-2025 | AN-No. 1C111
Transmit/receive module and AESA radar testing
12-Jun-2025
This application card describes a simplified material characterization method in the automotive radar frequency domain (76 GHz to 81 GHz) with the R&S®QAR50 automotive radome tester.
11-Jun-2025
Compliance and Pre-compliance testing are very important topics during the development of any Wireless DeviceIn this document the differences between Conformance testing vs. Pre-conformance tests will be explored as well as the Rohde & Schwarz offerings to conduct these tests
05-Jun-2025 | AN-No. 1C110
The purpose of this document is to provide a step-by-step guidance on how to perform VESA compliance testing on DisplayPort 8k cable assembly.Throughout this Method of Implementation (MOI), procedures will detail how to perform such VESA compliance testing using the R&S® ZNB lineup of Network Analyzers.
19-May-2025 | AN-No. 1SL412
The purpose of this document is to provide a step-by-step guidance on how to perform VESA compliance testing on DisplayPort 54 cable assembly.Throughout this Method of Implementation (MOI), procedures will detail how to perform such VESA compliance testing using the R&S® ZNB lineup of Network Analyzers.
19-May-2025 | AN-No. 1SL413