Download Center

RTO2000, debugging, EMI When debugging EMI problems in electronic circuits, development engineers face the challenging problem of quickly and accurately identifying and eliminating the sources of unwanted emissions. Many problems can be eliminated during development by using oscilloscopes for EMI debugging.

Oscilloscope bus triggering, RTO2000, bus triggering, history mode, break condition Use the hardware trigger to isolate break conditions. Break conditions can be corellated with their root cause one by one using the History Mode.

RTO2000, waveform display, R&S®SmartGrid, complex measurements Use the R&S®SmartGrid function to configure the display. For complex measurement tasks where several screen displays are helpful, you can superposition windows in multiple tabs. All measurement diagrams have labeled scales so you can immediately read important signal characteristics.

Compliance Testing, maximum output droop, RTO, Test Mode 6 A guide to carrying out a 100BASE-T1 compliance test for the MDI return loss using an R&S®ZND 2-port vector network analyser controlled by the ScopeSuite automation software.

Based on the new high-performance R&S®SMW200A vector signal generator and the R&S®RTO digital oscilloscope, the solution provides MIMO signal generation and realtime channel emulation (up to 4x4 or 8x2) as well as synchronous analysis of multiple TX antenna signals.

Generating models with a VNA and using these on an oscilloscope via the deembedding

23-May-2023 | AN-No. 1SL393

Webinar, RTO2000, Automotive Ethernet compliance testing This webinar presents details on the individual test cases of the compliance test and provides useful information on the required test setup.

Video, RTO2000, Oscilloscope, Power integrity test Today’s highly integrated electronic devices use smaller voltage levels and therefore require much smaller ripple levels on the power rails for reliable operation.

Oscilloscope bus debugging, RTO2000, bus debugging, UART, RS232, RS485 Let your Oscilloscope decode your UART/RS232/RS485 interfaces for you! So you can quickly understand the data and correlate the data content with the electrical signal.

RTO2000, user interface, toolbar, display, cockpit The advanced user interface enables clear orientation thanks to colour coding, as well as having a high-resolution capacitive touchscreen with gesture support. The toolbar at the top of the screen provides access to frequently used functions such as measurements, zoom and FFT.

RTO2000, toolbar, measurement functions, fast access The toolbar at the top of the screen provides access to frequently used functions such as measurements, zoom and FFT. Configure measurement in a few seconds by simply activating the measurement setup in the toolbar and choosing the desired measurement function and source channel in the sidebar.

The DUT operates in Test Mode 4 which is a PRBS sequence and it is exposed on a 125MHz disturber signal which comes out of theB6 signal generator which is integrated in the RTO6 oscilloscope. The ScopeSuite software provides a step by test foto guided test execution and reports the test results.

For this video, we will be using a 2 GHz R&S®RTO oscilloscope, an 8 GHz R&S®ZND two-port VNA as well as the R&S®ScopeSuite automated test software. Webinar, Automotive, Ethernet This webinar will focus on 1000BASE-T1 automotive Ethernet compliance testing based on the Open Alliance (OA) TC8 specification for the physical layer.

R&S VSE-K70x/FSx-K70x/FPx-K70x Vector Signal Analysis Application - Specifications

The radio unit activity versus power consumption is monitored using the R&S RTO oscilloscope to detect short power pulses or spikes. The results make it easy to evaluate energy efficiency measures such as advanced sleep modes and provide ratings for radio units based on their power consumption.

In this demo, Rohde & Schwarz and VIAVI Solutions in collaboration with Analog Devices are showcasing how advanced energy saving features such as microsleep DTx or discontinuous transmit on an O-RU platform save energy under real-world traffic loads - measured and validated through the R&S®RTO6 oscilloscope, the R&S®NGT power supply and the VIAVI TM500 O-RU tester.

12-Nov-2020

Test and measurement specialist Rohde & Schwarz extends its support to the University of New Hampshire Interoperability Laboratory (UNH-IOL) with an extension to their compliance test services. As a result, UNH-IOL customers can now achieve compliance for automotive Ethernet cables and connectors (link segment) based on the OPEN Alliance TC9 working group test specification supporting both unshielded (UTP) and shielded twisted pair cables and connectors (STP).

This results in minimal trigger jitter without postprocessing correction as well as high sensitivity that can be extended up to 16 bit in HD mode. 16-bit, low noise, RTO2000, high definition, precise measurement The unique digital trigger system from Rohde & Schwarz uses the sampling point of the A/D converter in the acquisition path so that the trigger system's input data is identical to the displayed

Oscilloscope innovation. Measurement confidence. | Инновационные осциллографы | Достоверные результаты измерений. Brochures and Data Sheets Flyer

03-May-2023

At IPAC’23 in Venice, Italy, Rohde & Schwarz demonstrates solutions that meet high precision particle accelerator requirements, address challenges in elementary particle research, particle therapy applications, material characterization, precise beam forming and monitoring as well as safe storage.

Rohde & Schwarz Drivers under VEE - Installation and Troubleshooting

20-Dec-2012 | AN-No. 1MA035

RTO2000, signal flow diagrams, dialog boxes, crosslinks Signal flow diagrams in the dialog boxes visualize the signal processing, making it easier to configure measurements. Crosslinks take you directly to logically related settings. Forward/back buttons help you navigate quickly between dialog boxes. Semi-transparent dialog boxes are an elegant way of keeping everything in view.

In addition the RTO6 can be used to monitor the communication between the two automotive Ethernet devices and also check the frequency response and spectrum of the noise signal source coming from the SMW. 1000BASE-T1, Signal Quality Indicator (SQI) 1000BASE-T1 interoperability test

Comprehensive test solutions guide for production and R&D

Small cell is a compact base station with smaller form factor and lower transmission power in comparison to the conventional macro base station. It covers relatively small area and serves less users. Usually, small cell can be integrated into the existing mobile network. By the evolution of radio access technology, the role of small cell has been changing through the evolution path. In the 2G/3G time, its role was to provide coverage in corner cases. Later during LTE, networks are not just providing coverage but capacity too. Small cells were then used to provide the addition capacity where required without adding additional spectrum. Now in 5G era, network operators use densification as an important strategy to provide seamless 5G services which demand coverage, capacity and performance too. With use cases requiring the 5G millimeter wave (mmW) rollouts, it makes sense to use small cells for densification due to the propagation characteristics of mmW.In this application note, we will shed light on the testing aspects of a small cell throughout the product life cycle with particular focus on the production test solution for the small cell device under test (DUT) in FR2 (frequency range 2, mmW frequency band) in Over the Air (OTA) environment for option 6 split based on radio communication tester R&S®CMP200 and OTA chamber R&S®CMQ200. The document is complemented with more insights into test solutions used in typical R&D test applications towards the second half of the application note.

19-Jun-2023 | AN-No. 1SL395

Increasing demands on power distribution networks have resulted in smaller DC rails, as well as a proliferation of rails that ensure clean power reaches the pins of integrated circuits.

07-Mar-2017

TC8 – OPEN Alliance - Flyer

Signal model based approach to joint jitter and noise decomposition - First published at DesignCon 2020 - White Paper

This application note expands modulation bandwidth up to 2 GHz and covers both V- and E-band examples.

18-Jun-2015 | AN-No. 1MA257

27-Oct-2021

Rohde & Schwarz is presenting its solutions live at productronica 2021, the leading global trade show for electronics development and production. The focus is on T&M equipment for latest technologies including automotive radar, satellite communications, Wi-Fi 7 and 5G. High throughput and low cost are essential in production environments, and Rohde & Schwarz solutions support exactly these goals. Trade show visitors will find the following Rohde & Schwarz highlights and more in hall A1, booth 375 at Messe München.

This application note explains how to convert different Rohde&Schwarz I/Q file formats among each other using the supplied software tool.

23-Sep-2015 | AN-No. 1EF85