Testing the tolerance to phase and impulsive noise is an integral part of quality tests for DVB-T/H and ATSC (8VSB) receivers, and several national and international standards specify guidelines and minimum requirements in this context. This Application Note introduces the R&S SFU-K42 impulsive noise option, the R&S SFU-K41 phase noise option, as well as the R&S SFU-K43 multinoise use option and describes how these can be used for testing the tolerance to phase and impulsive noise on commercial receivers.

26-Jan-2007 | AN-No. 7BM64

The R&S®TSStream multi-TS streaming software streams a number of MPEG transport stream files simultaneously over a single IP interface. The individual transport streams result in a high overall bit rate. To make the streams available on a standard PC, the R&S®TSStream software does not play the transport stream files directly from the hard disk but first loads them into the RAM. The maximum number and length of the transport streams depends solely on the PC's available RAM.

16-Mar-2017 | AN-No. 1GP113

The I/Q-Modulation Generator AMIQ provides high precision I/Q analog output for data calculated by the software WinIQSIM. Additionally, the software AMIQ-K2 enables you to read, convert, and transfer existing data files from various other programs to AMIQ format. Input formats supported by AMIQ-K2 are: - The propriety R&S programs IQSIM and DAB-K1. - Mathematic calculation programs like Matlab and Mathcad. - AWG202, COSSAP and ADS data files. AMIQ-K2 also provides you with remote control for AMIQ. For hardware and software requirements see section 2. AMIQ-K2 transfers data to AMIQ using either - GPIB - RS232. An extensive manual is supplied to help you use AMIQ-K2.

24-Nov-1999 | AN-No. 1MA10

This appication note introduces a program suitable for generating and analyzing WiMAX IEEE 802.16 signals for power amplifier testing. The program allows the user to change the generator settings, to select specific pre-defined test parameters and to analyze the test results. The application note describes the test parameters and the features and capabilities of the program.

03-Aug-2007 | AN-No. RAC-0611-0025

R&S®NESTOR cellular network analysis software supports law enforcement agencies in alibi verification by analyzing mobile network traces. R&S®NESTOR gives users reliable confirmation of whether an individual’s mobile phone was at a specific location at the time of a crime.

10-Apr-2024

7BM30 Digital TV,DTV,DVB,MPEG2,Broadcasting,Television,SFQ,EFA Phase Jitter in DTV Signals Phase Jitter in DTV Signals 7BM30 Digital TV,DTV,DVB,MPEG2,Broadcasting,Television,SFQ,EFA Phase Jitter in DTV Signals

16-May-2002 | AN-No. 7BM30

An offline AC/DC switching converter has no separate bias power supply that provides power to the control integrated circuit itself. Here, an auxiliary primary winding and discrete components are added to supply power to the control circuit. Verifying this circuitry is essential and requires accurate and detailed signal level and timing measurements. The startup sequence takes a long time, which needs to be taken into consideration in the measurement and requires an instrument with sufficient memory.

23-Nov-2022

The RSIB interface enables the network analyzers of the ZVR family to be controlled by means of Windows applications via DDE. The interface functions are contained in the DLL RSIB.DLL. The other DLL RSDDE.DLL provides functions for the DDE access to the instrument firmware. These functions are used by RSIB.DLL. The interface of these functions greatly corresponds to that of National Instruments for programming the GPIB. The function names are similar to those of the NI library but preceded by RSDLL. The two DLLs are part of the firmware and are updated with the firmware update kits.

31-Jul-1998 | AN-No. 1EZ33

The Society of Cable Telecommunications Engineers (SCTE) defined the ANSI/SCTE 40 specification: Digital Cable Network Interface Standard. ANSI/SCTE 40 tests are designed to test conformance of set-top boxes and other cable receiving equipment to ensure that they will operate correctly when installed in a cable system. The tests are a combination of noise (AWGN and phase noise), AM hum, micro-reflections, digital and analog adjacent channels, and other discrete interferences. These impairments are found on most cable systems to some degree. Rohde & Schwarz provides set-top box manufacturers with an easy solution to perform conformance testing in line with ANSI/SCTE 40 by using the R&S®SFU broadcast test system and the R&S®SFE100 broadcast tester. The R&S®SFU is able to perform most of the test procedures in one unit. Furthermore, additional test transmitters allow the simulation of full channel loading. This Application Note explains the specific test requirements, a possible setup, and the configuration using the R&S®SFU/SFE100.

29-Oct-2009 | AN-No. 7BM68

IEEE 802.15.4 (ZigBee™) uses OQPSK with a half-sine pulse shaping filter as modulation. This application note describes how to generate and analyze ZigBee™ signals. Simple test signals can be setup with the free-of-charge simulation software R&S WinIQSIM™ and transferred to the vector signal generator R&S SMU200A. It describes how to setup the vector signal analyzer R&S FSQ with option R&S FSQ-K70 for ZigBee™ signal demodulation and how to analyze modulation quality such as error vector magnitude (EVM).

21-Jun-2007 | AN-No. RSI03

Leaving aside the microwave generators, the present line of Rohde & Schwarz products comprisessignal generators up to 1 GHz (SMX, SMG), up to 2 GHz (SMH, SMGU), up to 3 GHz (SME, SMT) and up to 4.3 GHz (SMHU). For applications at higher frequencies, all signal generators can also be operated with an external passive frequency doubler. This extends the range of possible applications up to 8.6 GHz. Some degraded specs regarding level and modulation are described below. For people using the frequency range 3 to 6 GHz, the low priced combination SMT plus frequency doubler will mainly be interesting. Signal generator SMHU is useful for the frequency range up to 8.6 GHz. Especially the phase noise performance is excellent with this instrument. the required output signal. It should also be pointed out that the residual FM and the SSB phase noise will be 6 dB poorer as a result of frequency doubling.

20-Apr-1998 | AN-No. 1GPAN03

The use of Rohde & Schwarz device drivers under VEE software is not complicated. However, a number of factors are involved, the errors that occur are often difficult to diagnose. This application provides easy and detailed support for installation and troubleshooting using National Instruments or Agilent GPIB boards.

20-Dec-2012 | AN-No. 1MA035

Welcome to this introductory video show about the R&S® ZVA family of network analyzers. Network analysis is sometimes considered to be cumbersome and difficult to understand, a very offputting reputation for newcomers to network analyzers. To help you look at network analyzers in a different light, we have created this video series. We have intentionally refrained from explaining any theory in depth. Rather, we want to show you how to operate our analyzers for simple and useful applications. As well as just watching this video show, you can also use it as a guide and try yourself. All the operational steps shown only require a standard RF power amplifier which should be available in almost every lab. So, before we get properly started, we hope you enjoy this video show and much success in becoming familiar with network analysis in general, and our R&S products in particular.

13-Feb-2014 | AN-No. 1MA50

Smartly verify and decode Bluetooth® Low Energy (BLE) transmit signals with a reliable and costefficient spectrum analyzer – the R&S®FPC.

17-May-2018

Detailed instructions on 'How to activate the Win XP firewall'. The firewall is already activated on new units!

23-Nov-2004 | AN-No. 7BM46

Monitoring on up to 10 000 channels with different parameter settings

13-Jul-2012

R&S®AdVISE is a visual inspection software to monitor different regions of interest (ROIs) in a video for visible and audible changes. It automates the process of visually monitoring equipment under test during a test sequence and therefore eliminates human inattention, ensures reproducible results and simplifies the test documentation. R&S®AdVISE offers the possibility to monitor up to 32 ROIs in one video with 12 different specialized ROI types for different kinds of events. That allows the user to apply R&S®AdVISE to all sorts of individual test setups.This application note explains how to setup R&S®AdVISE to monitor the temperature of an EUT by using an infrared camera.

14-Sep-2020 | AN-No. 1S008

This paper describes the characterization of aluminum electrolytic capacitors specifically used in AC-DC power converter applications. It will be discussed why this capacitor technology is critical regarding lifetime and why it cannot be substituted simply by any another capacitor technology. Different aging effects of the capacitor will be discussed. Usage of the capacitor in different AC-DC converter topologies will be presented. Simulation circuits will be used to analyze the capacitor in more detail before suitable measurements will be performed to demonstrate a real example of a switching-mode power supply (SMPS).After the introduction into the aluminum electrolytic capacitor basics and theory, this paper will also present all important and possible measurements of capacitor parameters, like capacitance, equivalent series resistance (ESR) and ripple current. This includes in-circuit measurement which can be performed with an oscilloscope. An LCR-bridge is used to obtain high accuracy measurements in addition. A comparison between the two measurement methods will be presented. Furthermore, the required measurement hardware for the in-circuit measurements and the bridge measurement will be discussed and presented.Lastly, two different lifetime calculation methods are presented and a real example is used to compare the advantages and disadvantages of the different methods.Thanks to Mr. Frank Puhane from Würth eiSos GmbH & Co. KG who provided me with all aluminum electrolytic capacitor samples including the prepared capacitor with build-in temperature sensors to perform all measurements. Furthermore, his great expertise was very beneficial and helpful to create this premium application note.

07-Feb-2023 | AN-No. 1SL388

Most of the tests specified in standard TS 34.121 for 3GPP Rel-99 can be performed with R&S®CMU200. This document provides a step by step guide on how to perform Rel-99 measurements on transmitter/receiver characteristics, and performance tests according to TS 34.121 V8.4.0 clauses 5, 6 and 7 with standalone R&S®CMU200. Test cases that require additional instuments e.g. fading simulator (R&S®SMU200A or R&S®AMU200A) or spectrum analyzer (R&S®FSQ) will be discussed in brief in this application note with recommended reference. A set of *.sav files based on R&SCMU200 firmware V5.02 for UE supporting band I with power class 3 in RMC 12.2 kbps downlink/uplink is attached to this application note.

15-Apr-2009 | AN-No. 1CM71

RF interference is one of the largest contributors to poor network performance. It shows up in dropped calls and low data throughput rates. Traditionally, interference hunting means you get a list of sites with bad performance from an OSS. This defines the areas for interference hunting quite well.If, however, the problem remains after attempts at mitigation, it could be because other sources often mask symptoms of RF interference. Usually the strongest masking is due to the overlap between the interference signal and your network's signals. Analysis could involve complete cities or even countries, an error-prone task when using traditional spectrum analyzers and/or portable receivers and one that consumes a significant amount of time and budget.A more automated solution for larger areas can make the effort involved more manageable. The Rohde & Schwarz network scanner family (R&S®TSME, R&S®TSMA and R&S®TSMW) plus the network problem analyzer (NPA) feature of the R&S®ROMES4 measurement software is such a solution. It allows you to perform a fast drive test with a fleet of cars and collect spectrum data for your targeted or even complete network area in next to no time. Back at your office, the NPA tells you where to send dedicated interference hunting teams with an analyzer or receiver to track down the source of interference. This paper introduces the approach in detail.

02-Oct-2017 | AN-No. 1MA293

This Rohde & Schwarz application note provides an introduction into the DVB-H standard at first. It then discusses the test of DVB-H-capable mobile phones in development and production.

07-Apr-2005 | AN-No. 1MA91

The R&S®SMA100B signal generator offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace signal generators, e.g. from other manufacturers, with the R&S®SMA100B without having to change the remote control code.This application note describes how to use the remote emulation feature in general. Furthermore, it describes in detail the remote emulation for each supported instrument, limitations of the individual emulations and the remaining differences between the emulated and the original commands.

11-Dec-2019 | AN-No. 1GP120

The R&S®SMA100A signal generator offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace signal generators, e.g. from other manufacturers, with the R&S®SMA100A without having to change the remote control code. This application note describes how to use the remote emulation feature in general. Furthermore, it describes in detail the remote emulation for each supported instrument, limitations of the individual emulations and the remaining differences between the emulated and the original commands.

17-Aug-2015 | AN-No. 1GP93

Noise Power Ratio Signal Generation and Measurement

Noise Power Ratio (NPR) is an add-on tool for WinIQSIM™ to generate noise power ratio stimulus signals and measure the resulting noise power ratio of a device under test (DUT) using Rohde & Schwarz instruments via LAN or GPIB bus.

06-Nov-2015 | AN-No. 1MA29

Connecting simulation and measurements on physical devices

This application note is based on collaborative work between MathWorks® and Rohde & Schwarz. The focus is on linearization of a non-linear device, in our case the RF power amplifier. It is shown how simulation and the integrated functions of the Rohde & Schwarz instruments R&S®SMW200A and R&S®FSW work hand-in-hand with the simulation capabilities from MathWorks in MATLAB / Simulink. The goal is to provide a toolset to enable proper modeling and linearization approaches to optimize and verify the behavior of the power amplifier when used with complex wideband signals as used in 5G NR or latest satellite links.The application note brings code examples and an exemplary block set for MATLAB / Simulink to provide an easy start to replicate and use the described procedure.

05-Aug-2021 | AN-No. 1SL371

This application note provides information how to perform noise figure measurements under pulsed or bursted conditions with spectrum analyzers and noise sources, and introduce the capabilities of the Rohde & Schwarz FSW signal and spectrum analyzer to perform this measurement.

28-Jun-2018 | AN-No. 1EF103

Application Note 1MA68 has been replaced by .

10-Dec-2008 | AN-No. 1MA68

Analysis, 5G FR1 MIMO signals, R&S®NRQ6, R&S®VSE Measurement of the phase difference between the MIMO layers is a challenging task in the design of 5G base stations. However, this measurement and its analysis can be easily accomplished using the R&S®NRQ6 frequency selective power sensor and R&S®VSE signal explorer software. Analysis of 5G FR1 MIMO signals with R&S®NRQ6 and R&S®VSE Analysis, 5G FR1

14-Jan-2022

The new buffer analysis feature was introduced with firmware version 2.80 for the R&S DVM family. This application note describes this feature and explains how it represents a valuable asset to your daily business operations This application note first provides background information and then explains how monitoring and measurement have been implemented in the R&S DVM family.

23-Mar-2006 | AN-No. 7BM53

RF performance measurements for Wi-Fi 7.

30-May-2022