This application note is a systematic guide to help test engineers configure the Vector Network Analyzer in order to perform compliance test on Automotive Ethernet cables according to the Open Alliance TC9 standard.

13-Aug-2019 | AN-No. GFM323

TETRA, the TErrestrial Trunked RAdio, is the professional mobile radio standard (PMR) used world wide by governmental safety and security authorities and organizations, as well as by private utilities from energy suppliers through to transport. Rohde & Schwarz provide test instruments idealy suited for both the development and production of TETRA base stations and user equipment, as well as for network planning, network coverage and quality of service, network monitoring and optimization, maintenance, and service. This Application Note shows examples for measurements with R&S instruments covering the entire range of TETRA test requirements.

26-Apr-2013 | AN-No. 1MA189

Vector signals at microwave frequencies can easily be generated by the direct upconversion of I/Q baseband signals. A versatile and cost-efficient solution consists of an R&S®SMF100A microwave signal generator combined with a baseband source (e.g. the R&S®AFQ100A) and an external I/Q mixer. This application note describes how to perform the frequency upconversion.

28-Jul-2009 | AN-No. 1GP76

Over-the-air (OTA) beamforming testing

04-May-2018

The R&S®CMU200 provides the signals required for 2nd order intermodulation (IM2) performance verification for WCDMA / CDMA2000 chipsets with zero IF design.This application note is a guide to configure the R&S®CMU200 for such an application.

16-Dec-2004 | AN-No. 1CM54

The new WiMAX radio technology - worldwide interoperability for microwave access - is based on wireless transmission methods defined by the IEEE 802.16 standard. WiMAX has been developed to replace broadband cable networks such as DSL and to enable mobile broadband wireless access. Rohde & Schwarz offers a complete test solution for WiMAX applications by combining its Signal Generator R&S SMU200A and Signal Analyzer R&S FSQ plus the appropriate options.RuS_WiMAX_OFDM is a 10 minutes video on WiMAX OFDM measurements.Please see also 1MA96 for General information about the WiMAX standard and 1MA97 for Generating and analyzing 802.16-2004 and 802.16e-2005 signals.

11-Jul-2006 | AN-No. 1EF57

Radar technology is essential for state-of-the art and future vehicles on the path to full autonomous driving. Radar sensors deliver critical information about the surrounding traffic environment or monitor the interior of the vehicle. As safety-relevant parts, radar sensors must adhere to specifications and regulations.

12-Dec-2022

Two R&S®ETL TV analyzers or two R&S®ETC compact TV analyzers are used to measure the receive level of a car antenna against that of a reference antenna. The R&S®BCDRIVE broadcast drive test software exports measured data for display in Google Earth.

19-Feb-2015

Modern radio communication systems have to provide higher and higher data rates. As conventional methods like using more bandwidth or higher order modulation types are limited, new methods of using the transmission channel have to be used. Multiple antenna systems (Multiple Input, Multiple Output – MIMO) gives a significant enhancement to data rate and channel capacity. This application note gives an introduction to basic MIMO concepts and terminology and explains how MIMO is implemented in different radio communications standards.

02-Jul-2009 | AN-No. 1MA142

With recent enhancements in semiconductor technology the microwave frequency range beyond 50 GHz becomes more and more attractive especially for wideband communication applications like 802.11ad, microwave links or automotive RADAR. Low phase noise is essential for these applications to work properly. Accurate measurement of phase noise is needed to improve the performance. However, test setups at these frequencies become difficult, especially when cross correlation of two receive paths is needed to suppress additional phase noise added by the local oscillators or mixer stages. Two external harmonic mixers in combination with a commercially available phase noise tester are used for phase noise analysis. Signal sources with frequencies up to 500 GHz can theoretically be measured with this setup.

05-Feb-2018 | AN-No. 1EF101

Trace minimum hold function with the R&S®MNT100, R&S®PR200, R&S®PR100 and R&S®DDF007

15-Jul-2019

For A/V devices such as smartphones, tablet PCs, Blu-ray players, set-top boxes and TV sets, the perceived video quality must satisfy very high standards. A/V devices need to hold their own in three main areas:ı Stability (environmental influences, response to source signal disturbances, etc.)ı Performance (switching times, delays)ı Compliance with standards (input and output formats)Any deviations from the expected video and audio output can be automatically and precisely detected with R&S A/V distortion analysis on all common analog and digital interfaces such as HDMI™ and MHL™.This document examines the relevant setups and configurations.

15-Oct-2014 | AN-No. 7BM87

Create and simulate detailed traffic situations for the verification of cellular V2X (C-V2X) connectivity

30-Jun-2022

This application note introduces the methods to convert MediaFLO™ waveform files to ARB format to be used with R&S® Broadcast Signal Generators SFx-K35 ARB Generator. R&S® IQWIZARD and WinIQSIM™ software are used, providing a quick and simple file conversion method.

10-Nov-2008 | AN-No. 7BM73

With its small footprint, the R&S®ATS1000 antenna test system is the ideal direct far-field OTA system to test phased array antennas. The system tests and optimizes the radiation characteristics of any modules using the AiP technology from 18 GHz to 87 GHz.

12-Mar-2020

Near Field Communication (NFC) is a new short-range, standards-based wireless connectivity technology, that uses magnetic field induction to enable communication between electronic devices in close proximity. Based on RFID technology, NFC provides a medium for the identification protocols that validate secure data transfer. NFC enables users to perform intuitive, safe, contactless transactions, access digital content and connect elec­tronic devices simply by touching or bringing devices into close proximity. This White Paper gives an overview of NFC uses, NFC technology and signals and RF measurements on NFC units. NFC analog measurements with R&S test instruments are described in detail in R&S application Note 1MA190 'Basic Tests of NFC Enabled Devices Using R&S Test Equipment'

03-Jun-2013 | AN-No. 1MA182

The following application note describes the function and operation of user menus for FSE Spectrum Analyzers including option Vector Signal Analysis (FSE-B7). For measurements according to the GSM standard user menus are provided, which perform settings on FSE for Base Station testing required in the standard. The menu and the accompanying setups are stored on a floppy disk. For operation of the menus firmware version 1.40 or higher is required. Option Vector Signal Analysis FSE-B7 has to be installed for the use of the application menu.

16-Jan-2002 | AN-No. 1EF23

With the wideband extension R&S®ESW-B1000, the R&S®ESW EMI test receiver allows never seen testing speed with up to 970 MHz of FFT bandwidth. External applications can now take advantage of the wide bandwidth. ESW firmware 3.20 adds a new method for exporting trace data from the instrument, regardless if the instrument is equipped with the wideband extension or not. SCPI commands allow live trace export of multiple traces simultaneously. This application note describes the use and applications of SCPI commands to request trace data of up to 4 traces simultaneously from the R&S®ESW receiver, even allowing CISPR detectors. The commands enable trace export while the instrument measures continuously and therefore theoretically enable infinite measurements.

25-Jul-2024 | AN-No. 1EE27

This application note helps the user to configure a Rohde & Schwarz vector signal generator for LTE FDD repeater conformance testing. It explains step by step how to set up the baseband signal for the various test cases defined in the 3GPP Technical Specification 36.143.The R&S®SMx vector signal generators provide predefined, LTE-conform test models and are therefore ideal for LTE repeater conformance testing. The test cases in TS 36.143 can be set up with a single instrument which provides all necessary test signals including the four specified repeater stimulus signals.

26-Apr-2013 | AN-No. 1GP85

This application note is one of three papers dealing with the WiMAX standard, covering the theoretical aspects of WiMAX. It gives a detailed overview of the basic concepts of WiMAX (FFT, OFDM, frame structures, etc) and explains the physical standard parts of IEEE 802.16 standards 802.16-2004, corr1 and 802.16e.Please see also 1MA97 for Generating and analyzing 802.16-2004 and 802.16e-2005 signals and 1EF57 for an introduction to the WiMAX standard.

13-Jun-2006 | AN-No. 1MA96

Radio frequencies in bands around 28 GHz are being discussed as candidates for mobile communications of the fifth generation (5G). Beam steering will be a key feature in the context of 5G. It will be a major challenge to test the beam steering capabilities of base stations and user equipment in every phase from research and development through production. Conducted measurements will be mainly replaced by over-the-air measurements of electromagnetic radiation. Rohde & Schwarz offers the R&S®NRPM Over-the-Air (OTA) Power Measurement Solution that perfectly fits such measurement needs.Part of this solution are the R&S®NRPM-A66 antenna modules. They have integrated diode detectors. Thus, there are no cables between the antenna and the detector as in traditional setups. This avoids high and potentially unknown RF losses. The R&S®NRPM-A66 antenna modules with their integrated diode detectors are factory calibrated, which means that the user does not have to calibrate them to achieve highly accurate measurement results.This application note contains theoretical background on OTA power and pattern measurements. It gives step-by-step instructions for the verification of the power level and the radiation pattern of a device under test (DUT) in comparison to a golden device, and it presents an approach for verifying the accuracy of beam steering.

29-Aug-2017 | AN-No. 1GP118

The signal purity of clock sources has a direct impact on system performance. To ensure proper operation, it is necessary to verify that the purity meets the design requirements.

30-Sep-2021

Wide range of set-top box tests in line with current DVB-xx standards using a variable, future-ready test system

13-Jul-2012

An easy-to-setup test solution for high speed multichannel acquisition for 5G NR signals

04-Mar-2020

Functional Testing

Although data services in the context of eMBB, URLLC and mMTC are the pivotal drivers behind the 5G evolution, legacy services like voice and video communications still represent important services that operators want to offer to their subscribers. As part of the technology evolution, we have seen a major change from circuit-switched 2G networks with an initial focus on telephony to fully packet-switched 4G networks focused on internet data communications.This application note focuses on different details of voice services in 5G networks. Besides some theoretical background this document describes the procedure to setup a 5G network with R&S®CMW500 and R&S®CMX500 radio communication testers and how to carry out different functional voice call tests for 5G networks.

06-Oct-2021 | AN-No. 1SL364

In this day and age of internet of things, more and more devices are connected to the local network, making it even more difficult for the IT department to monitor them. Rohde & Schwarz instruments are also increasingly accessed via their LAN interface, which provides additional convenience features such as remote desktop, SMB file transfer or a web interface. To make it easier to monitor the use and status of instruments, some devices offer a software option, the Health and Utilization Monitoring Service (HUMS).HUMS can be accessed via SNMP and REST (HTTP) and provides all necessary information about the health status and utilization over time in many details.This application note describes how to access HUMS and what data is provided.

11-Jan-2021 | AN-No. GFM336

When measuring audio components with unknown transients, the experienced engineer watches the settling of the DUT before accepting a measured result to be valid. The settling function in the UPL/UPD simulates this process and automates it by continuously comparing the measured value with a number of measured values stored before. A measured value is only accepted as being valid if it is within the tolerance limits entered by the user. This application note explains the settling process and gives hints for practical use.

03-Jun-1998 | AN-No. 1GA12

Signaling checks, DSMCC object carousel analysis and fault localization all in one instrument: R&S®DVMS, R&S®DVM or R&S®ETL

28-Dec-2012

This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB 3.2 Legacy Cable Testing for USB Type A, Type B, and Micro family connector types. Based on 5 Gbps and 10 Gbps signaling per lane with vector network analyzers from Rohde & Schwarz.

09-Nov-2023 | AN-No. 1SL408

In civil aviation, instrument landing system (ILS) transmitters use antenna arrays to provide guidance to approaching aircraft. ILS performance strongly depends on the precise alignment of the magnitude and phase of each element in an antenna array. The R&S®ZNH handheld vector network analyzer with a built-in source allows fast, convenient on-site measurements on the ILS antenna system.

09-Aug-2021