Audio Analyzers UPD and UPL with their large variety of functions provide practically all measurement procedures required in audio technology. Thanks to the Universal Sequence Controllers UPD-K1 and UPL-B10, which are available as options, the user is able to considerably expand the range of functions to suit his particular requirements. It is possible, for instance, to add complete measurement functions - eg measurement of ohmic resistance - and to read out, convert or reload sweep results or to add new scale labelling (eg group delay). Another example is the analysis of sweep curves and the display of results in a window next to the curve. As far as softkey labelling and functions are concerned, operation of the sequence control programs is analogous to the softkey control of the UPD/UPL graphics display.

04-Jun-1998 | AN-No. 1GA16

Using S-parameters instead of a fixed offset makes measurements more accurate by accounting for the interaction between the sensor and a component. This shifts the sensor's reference plane from the sensor's RF connector to the input of the device that is being applied externally. This application note explains the fundamentals of using S-parameters and discusses some common applications in which S-parameter correction is useful. It also introduces a command line tool for updating S-parameter data in custom applications or in automated test setups.

27-Jul-2012 | AN-No. 1GP70

Rohde & Schwarz offers unique one-box solutions for reliable testing of air navigation systems such as ILS, VOR and DME.

04-Nov-2010

The R&S EX-IQ-Box serves as a digital baseband interface between a device under test (DUT) and Rohde & Schwarz generators, analyzers and radio communication testers. The DigIConf software supplied with the device controls up to four R&S EX-IQ-Boxes in a test setup and can thus output IQ data for feeding into a DUT while simultaneously receiving IQ output from a DUT.To work together smoothly, the DUT, the R&S EX-IQ-Box and the R&S test instruments have to be configured properly. The purpose of Application Note 1MA168 is to introduce the right 'initial steps' required to get started successfully.

23-May-2012 | AN-No. 1MA168

This application note describes how to configure a Rohde & Schwarz Network Analyzer to make spectral measurements directly on a device under test.

16-Mar-2012 | AN-No. 1EZ62

Emergency Call (eCall) is a service provided in Europe with the goal of reducing response times for accidents or other emergencies on the roadways. This application note briefly describes the technology behind eCall and presents conformance tests for eCall using the R&S®CMW500 RF tester and the R&S®SMBV100A vector signal generator. A Test software for eCall makes it quick and easy to perform these tests with the GSM or WCDMA wireless communications standard. It also shows a test solution for GNSS performance tests for eCall using the R&S®SMBV100A vector signal generator and the option R&S®SMBV-K361 together with CMWrun.This application note is outdated. We therefore refer to the newer application note .

24-Jan-2018 | AN-No. 1MA241

The measurement of error vector magnitude (EVM) is relative – but what is the reference?

02-Mar-2020

DVB-T can be used for stationary, portable and – using the diversity technique – also mobile reception. Stationary reception via a Gaussian channel and a fixed Yagi antenna on the roof usually poses no problems. This is different with portable reception, for example on a park bench, if there are moving objects in the vicinity of the receiver that has been put up for optimal reception. These may be persons or any kind of vehicles that – while passing by the receiver - generate different types of reflections. With mobile reception, for example when driving on a motorway, poor receiving conditions have the most detrimental effect. Receiving conditions can be considerably improved by employing several antennas, a technique that is referred to as antenna diversity. This application note discusses the improvements that can be achieved with antenna diversity and explains how to simulate a DVB-T channel with the required characteristics by means of TV Test Transmitter R&S SFQ.

31-Jul-2003 | AN-No. 7BM06

It is frequently desired to process the results stored on the floppy on a PC, eg for the generation of customer-specific test reports by means of a word processing system. To enable processing on an external PC, the binary data usually need conversion into an ASCII format. This is possible by means of the ESXS2ASC.EXE program. The program is available free of charge from your Rohde & Schwarz representative.

18-Jan-2002 | AN-No. 1EE21

This application note describes a software application that can be utilized in conjunction with Rohde&Schwarz Signal- and Spectrum Analyzers and Signal Source Analyzers to capture and analyze transient signals. The software application takes advantage of the instrument’s IQ memory buffer of up to 705 Msamples to capture and analyze IQ signals in the time domain and / or frequency domain. This is useful for measuring lock time, analyzing radar pulses, finding spurious transients, and other measurements similar in nature to these. This application can be used with R&S®Signal Source Analyzer FSUP and R&S®Signal and Spectrum Analyzers FSQ, FSU, FSG, FSV.

16-Feb-2009 | AN-No. 1MA141

Getting started with IQ Streaming Application

The intention of this Application Note is to provide an overview of all necessary tasks for getting along with successful IQ Streaming.The necessary technical requirements are described as well as the streaming parameters of the IQ data stream.The general operation and basic setup of the MSR4 is described in the user manual and is not part of this document.

28-Mar-2023 | AN-No. 1179.7104.02

- not available -

20-Jul-2001 | AN-No. 7BM24

This application note discusses WLAN standard IEEE 802.11n. It first describes the most important amendments to previous releases and the ambitious new measurement tasks. Then, it describes how to deal with these tasks using Rohde & Schwarz instruments. The main focus here is on transmission over several TX and RX antennas (MIMO). Building multistandard signals using Rohde & Schwarz generators is also described. Screenshots from the analyzer taken on 802.11n signals complete the document.

26-Apr-2013 | AN-No. 1MA179

3GPP TS25.141 defines conformance tests for UTRA base stations (NodeB). This application note describes how performance tests (TS25.141 Chapter 8) can be performed quickly and easily by using vector signal generators from Rohde & Schwarz. Examples illustrate the manual operation. A free software program enables and demonstrates remote operation.

04-Mar-2015 | AN-No. 1MA78

This white paper describes the interaction between intermodulation products generated by a device under test (DUT) and intermodulation products generated internally in a spectrum analyzer. The overall intermodulation distortion may be too optimistic or pessimistic. Examples demonstrating cancelling IM products and necessary steps to avoid an influence of the spectrum analyzer on the measurement results are outlined.

29-Nov-2012 | AN-No. 1MA219

The LTE technology as specified within 3GPP Release 8 was first commercially deployed by end 2009. Since then the number of operators implementing the technology is strongly increasing around the globe. LTE has become the fastest developing mobile system technology. The same way GSM and WCDMA have been enhanced with additional features over time, LTE is continuously worked on. Initial enhancements have been included in 3GPP Release 9 and are described in this white paper.

19-Dec-2011 | AN-No. 1MA191

This application notes introduces the Multi-Standard Radio Analyzer function of the R&S®FSW and shows how it performs the measurement on multi-standard radio transmitters. It reveals interactions caused by the coexistence of signals of different cellular standards and localizes the root cause. With an example of a base station signal consisting of three radio access technologies (GSM/WCDMA/LTE FDD) it shows how easy interactions can be found. The R&S®FSW is the ideal tool for trouble shooting tasks with its combination of a large bandwidth and the versatile Multi-Standard Radio Analyzer in one measurement instrument.

17-Jul-2012 | AN-No. 1EF83

3GPP Release 9 Technical Specification (TS) 37.141 covers multistandard radio base station conformance testing. Multistandard radio includes four standards of mobile communications: GSM, WCDMA, TD-SCDMA, and LTE. This application note introduces the concept of multistandard radio base stations as well as solutions for transmitter and receiver tests based on Rohde & Schwarz signal generators and Rohde & Schwarz signal and spectrum analyzers.

06-Jul-2012 | AN-No. 1MA198

Although the commercialization of LTE technology began in end 2009, the technology is still being enhanced in order to meet ITU-Advanced requirements. This white paper summarizes these necessary improvements, which are known as LTE-Advanced.

20-Aug-2012 | AN-No. 1MA169

The new R&S®DATA-NPT mobile network performance test from Rohde & Schwarz brings innovation to network performance testing. The patent-pending testing solution is a very compact and resource-saving implementation of a new measurement procedure that simultaneously measures the maximum data capacity and the minimum continuous connectivity in a mobile network.

21-Apr-2016

radiated conformance testing according to TS 38.141-2, Rel. 16

3GPP defines the Radio Frequency (RF) conformance test methods and requirements for 5G NR Base Stations (BS) in the technical specifications TS 38.141. This application note describes all mandatory radiated RF transmitter tests (TS 38.141-2, chapter 6), according to Release 16.Furthermore, this document provides a brief introduction about the different R&S OTA antenna test solutions and how they are applicable for base station conformance testing. Rohde & Schwarz offers solutions for any test case that is mentioned in this application note.

20-Dec-2019 | AN-No. GFM324