Measuring and optimizing the characteristics of individual elements within an antenna array for beamforming performance of Qualcomm 5G mmWave modems SDX50 and SDX55.

25-Feb-2020

Verifying 5G transmitted signals in the field with the R&S®Spectrum Rider FPH handheld spectrum analyzer

30-Jul-2024

This application card examines the best practices for testing video service quality over mobile networks and discusses the different types of video services and recent changes in video streaming.

18-Apr-2024

Gated spectrum method with the R&S®PR200

03-Feb-2020

The present R&S®SMW-K503/-K504 Interface Control Document contains information on- the R&S descriptor word format, including pulse descriptor words and timed control descriptor words in basic and expert mode- Timing requirements and limitations of the real-time control interface- Properties of the ADV DATA/CTRL network interfaceIt is intended for use by customers using descriptor words to control the R&S®SMW200A in real-time. The interface control document specifies the interface between the customers hardware used for provision of descriptor words and the R&S®SMW200A ADV DATA/CTRL interface. Additional information on descriptor word processing inside the R&S®SMW200A is provided.

25-Aug-2021 | AN-No. 1GP133

This application note describes how to generate GSM signals for wide ranging receiver tests under fading conditions for GSM/GPRS/Edge. The test setup requires an R&S®CMU Radio Communication Tester with IQ-IF interface option CMU-B17 and an R&S®SMIQ vector signal generator or baseband fading simulator ABFS for generating GSM. The GSMFadLevCor program included with this application note performs a semi automatic level correction of the power fed to the Device Under Test (DUT).

28-Aug-2009 | AN-No. 1MA60

The Universal Radio Communication Tester R&S®CMU200 can perform most of the CDMA2000 1xEV-DO access terminal (AT) tests specified in the standard IS-866-A on its own. Some tests require additional instruments. This application note shows how to perform these tests easily with the remote-control software CMUgo, using the R&S®CMU200 in combination with R&S®SMU, R&S®AMU, R&S®SMJ or R&S®SML signal generators, and R&S®FSQ, R&S®FSU, R&S®FSP, R&S®FSL or R&S®FSMR spectrum analyzers.

05-Jan-2012 | AN-No. 1MA123

RTH, EN 50160 standard, Scope Rider, RTH-K34, RTH-K15 Providing eight test instruments in one rugged, battery-operated device, the R&S®RTH handheld digital oscilloscope is a flexible and powerful solution for this application. Measuring power quality in electrical installations RTH, EN 50160 standard, Scope Rider, RTH-K34, RTH-K15 Providing eight test instruments in one rugged, battery-operated device

25-Aug-2017

Vector signals at microwave frequencies can easily be generated by the direct upconversion of I/Q baseband signals. A versatile and cost-efficient solution consists of an R&S®SMF100A microwave signal generator combined with a baseband source (e.g. the R&S®AFQ100A) and an external I/Q mixer. This application note describes how to perform the frequency upconversion.

28-Jul-2009 | AN-No. 1GP76

The simple network management protocol (SNMP) can be used in a wide range of applications, as described in Rohde & Schwarz Application Note 7BM65 “The Simple Network Management Protocol: Remote Controlling for Monitoring Devices“. In particular, the option of centrally managing monitoring sensors – such as the R&S DVM for RF and baseband signals in digital broadcasting – shows the potential of this technology. However, the protocol alone is not enough to achieve this management functionality. Specialized management applications are needed that carry out the SNMP requests and display the results graphically. This application note and the associated SNMP example application will show how the R&S DVM family can be used for this type of application. Rohde & Schwarz customers can use the included source code (programming language: C#) to make the modifications needed for their own situations.

31-May-2007 | AN-No. 7BM66

This application note provides basic information about frequency and phase settling time measurements and how the measurement is implemented inside modern phase noise analyzers.Measurement examples show the possibilities of this measurement feature and help the user to understand and use this method.

28-Jun-2018 | AN-No. 1EF102

With all these new flexibilities introduced with 5G, the radio access has become more complex to understand and analyze. More network interfaces and RAN configuration parameters have to be managed and the RAN and in particular the connection control, mobility and measurement reporting are decisive for the network performance. It will be vital for the system experts and radio engineers to gain knowledge and evolve their methods and tools to facilitate the work to optimize and troubleshoot 5G and 4G RAN performance. Thus, tools are needed that allow for easier understanding of the message flows in the radio protocols. The R&S®ROMES4 KPIs and Smart Events will help doing the work much easier and quicker. They are defined for a key set of LTE, EN-DC and NR RRC connection control and mobility procedures where the performance is crucial to achieve high quality network performance. Trouble shooting problematic cases and optimization of RAN protocols are key drivers to improve the mobile network performance with R&S®ROMES4.

28-Jun-2022 | AN-No. 8NT06

The R&S®ZVA-Zxxx and R&S®ZCxxx mmWave converters extend the R&S®ZNA vector network analyzer frequency range up to 1.1 THz.

27-Feb-2025

Over-the-air (OTA) beamforming testing

04-May-2018

The R&S®RTB2000 digital oscilloscope lets you share your scope’s display with any computer/projector via LAN or Internet. The oscilloscope comes with an RJ-45 Ethernet jack and a built-in web server (as standard). The screen is displayed via a direct connection to a PC, via LAN or over the Internet.

21-Mar-2017

Recent mobile test methods could not evaluate the quality of data reduced speech signals with different coded and decoded signals. The Perceptual Evaluation of Speech Quality (PESQ) provides the solution for this measuring problem. GSM PESQ is an add-on tool for CMUgo for automatic measurement of the PESQ for GSM mobile phones according to recommendation ITU-T P.862.1 featuring selectable fading profiles, frequency hopping sequences and variable Additional White Gaussian Noise (AWGN).

05-Jan-2012 | AN-No. 1MA119

Connecting simulation and measurements on physical devices

This application note is based on collaborative work between MathWorks® and Rohde & Schwarz. The focus is on linearization of a non-linear device, in our case the RF power amplifier. It is shown how simulation and the integrated functions of the Rohde & Schwarz instruments R&S®SMW200A and R&S®FSW work hand-in-hand with the simulation capabilities from MathWorks in MATLAB / Simulink. The goal is to provide a toolset to enable proper modeling and linearization approaches to optimize and verify the behavior of the power amplifier when used with complex wideband signals as used in 5G NR or latest satellite links.The application note brings code examples and an exemplary block set for MATLAB / Simulink to provide an easy start to replicate and use the described procedure.

05-Aug-2021 | AN-No. 1SL371

Analysis, 5G FR1 MIMO signals, R&S®NRQ6, R&S®VSE Measurement of the phase difference between the MIMO layers is a challenging task in the design of 5G base stations. However, this measurement and its analysis can be easily accomplished using the R&S®NRQ6 frequency selective power sensor and R&S®VSE signal explorer software. Analysis of 5G FR1 MIMO signals with R&S®NRQ6 and R&S®VSE Analysis, 5G FR1

14-Jan-2022

Simultaneously measure various current levels from μA to A in all phases of IoT device activity – from sleep to receive and transmit mode

01-Oct-2019

This Application Note describes the HSDPA uplink channel structure. Challenges for UE power amplifier design are outlined, and guidelines how to use R&S measurement equipment for testing UE power amplifiers are provided. An outlook on High Speed Uplink Packet Access (HSUPA) and the impact of HSUPA on the uplink channel structure is given.

11-Jul-2011 | AN-No. 1MA84

This Application Note provides an overview of the Bit Error Rate (BER) test capabilities of the Universal Radiocommunication Tester CMU300 on GSM / EDGE Base Stations. It includes information about measurement principles, the supported test environment and channels, CMU settings, operation, and ordering information.

15-Jan-2002 | AN-No. 1CM32

This Application tests whether a multi-mode mobile phone supporting both GSM and IS136 has registered onto a GSM network, or an 136 network. The test set-up requires a CRTx to provide the GSM BCCH carrier, and a CMU200 to provide the IS136 DCCH carrier.

07-Mar-2003 | AN-No. 1CM31

Verify and optimize your product design under realistic fading conditions in a deterministic lab environment that allows repeatable measurements using standardized and user-defined fading profiles.

27-Oct-2020

More frequency bands and larger dynamic ranges increase the number of test points required in characterization and production of the latest RF frontends (RFFE). Actively managing test time and cost while maintaining quality is more important than ever before.

08-Jun-2020

O-RAN makes radio access networks more open, disaggregated and flexible. O-RUs need to comply with 3GPP and O-RAN standards. Automation is crucial for extensive O-RAN conformance testing since O-RAN network elements are asynchronously released.

08-May-2024

This application note is step by step guide on 5G New Radio (5G NR) signal generation and analysis capabilities using the R&S®SMW200A Vector Signal Generator equipped with software option SMW-K144 (5G NR option), in combination with the R&S®FSW Signal and Spectrum Analyzer and the software options FSW-K144 & FSW-K145 (5G NR Downlink & Uplink Signal Analysis). The R&S®VSE Vector signal explorer has also been used for analysis purpose in parallel to the FSW-K144 & FSW-K145 software options.It is assumed that the reader already has a deep understanding of the 5G New Radio standard as well as the testing aspects. If not, then please refer to the 5G eBook more a detailed overview on the fundamentals, procedures, testing aspects of the 5G NR technology.

22-Nov-2019 | AN-No. GFM322

The FLO in MediaFLO stands for 'forward link only'. MediaFLO technology covers transmission of files and multimedia content to handheld devices. The FLO device minimum performance specification (MPS) was created to ensure that FLO receivers can receive a FLO service that fulfils the compatibility guidelines of the FLO air interface specification. This Application Note shows how the Broadcast Test System R&S SFU from Rohde & Schwarz can be used to generate all test scenarios required by the minimum performance specification.

31-Aug-2006 | AN-No. 7BM62

Sequencer Software Tool

20-Feb-2015

The SGMA products from Rohde & Schwarz are optimized for use in production and automated applications. Their key characteristics are high speed and a compact design. The instruments are also an ideal enhancement for the R&S®SMW200A in MIMO applications. They can interface to the high-end vector signal generator and serve as additional RF outputs. This application note explains how to connect and interface with the SGMA instruments and gives some recommendations and hints about their use. It helps the user to get started and to understand how the instruments interact.

15-Oct-2015 | AN-No. 1GP103

This Application Note describes the internal transfer of ZVR measurement data in Excel, carried out on the PC option of the ZVR, and the evaluation of the data in Excel tables. To start the data transfers, macros are implemented under Excel.

28-Jul-1998 | AN-No. 1EZ39