Rohde & Schwarz offers a wide range of essential lab equipment, like power supplies, LCR meters and power analyzers. To enhance the versatility of these instruments, a selection of application programs is available. These application programs typically remote-control equipment for more complex tasks like sweeps, logging and battery testing.In a larger lab there may be a larger number of such instruments present, and a selection of available application programs installed on a PC. In such a case it is desirable to have a kind of dashboard providing an overview over both, including version check and links to documentation on the Rohde & Schwarz website. The R&S® application dashboard for power supplies and meters is providing this functionality. The application document contains the description and user manual for the software. Furthermore a package is provided containing installers for all related application programs.

13-Sep-2024 | AN-No. 1GP140

All channels of DC power supplies R&S®NGL200 and R&S®NGM200 are isolated against the grounding equipment conductor and against the digital ground of the instrument. Therefore, channels can be connected in parallel for increasing the current capability, or in series for achieving higher voltages or dual-voltage supplies. In the case of parallel and serial connections it is usually desired to switch all channels simultaneously on and off for protecting the supplied circuitry and for avoiding overcurrent on other power supply channels.This application note describes how to connect and configure DC power supplies R&S®NGL200 and R&S®NGM200 for synchronized on and off switching of all channels across multiple power supplies.

15-Jun-2020 | AN-No. 1GP126

Source measure units R&S®NGU401 and R&S®NGU201 are capable of precise current measurements from sub-microampere up to ampere. This application note provides a tool which generates a voltage or current sweep using the arbitrary function of the instruments. A fast log captures voltage and current values during the sweep. Subsequently the application program determines the voltage and current value for each sweep step and plots the results in an I-V curve .The tool can be utilized to characterize all kinds of two-pole devices like diodes, LEDs and solar panels.This application note can also be used in connection with DC power supplies R&S®NGM201 and R&S®NGM202.

15-Feb-2021 | AN-No. 1GP129

This application program supports the logging and fast logging functionality of the power supplies R&S® NGM200, NGU201 and NGU401. Standard logging is also supported with power supply R&S® NGL200 and NGP800. Power supplies R&S® NGA100 and NGE100 are supported in the data collection mode. Charting functionality is available for logged voltage, current and power values.

14-Nov-2019 | AN-No. 1GP122

Versatile Software Tool for Rohde & Schwarz Instruments

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

24-Dec-2017 | AN-No. 1MA074

This application note provides an application program for level alignment, test automation and reporting with PESQ, POLQA and delay measurements on the Audio Analyzer R&S®UPV or R&S®UPV66.

08-May-2013 | AN-No. 1GA62

The combination of R&S® CMU200 and R&S® UPV is in use for various tests of mobile phone speech functionality, such as acoustic tests according to 3GPP 26.132 or speech quality tests according to ITU-T P.862 (PESQ®) or ITU-T P.863 (POLQA®). This application note explains how to replace the R&S® CMU200 in these tasks with R&S® CMW500.

25-Jul-2014 | AN-No. 1GA65

Acoustic properties like reverberation time and early reflections are important for test rooms as well as for speech intelligibility and music performance in assembly rooms and concert halls. This application note explains the basics behind these properties and offers an application program for their measurement.

10-Jul-2012 | AN-No. 1GA61

The instrument setup provided in this application note allows to analyze a degraded speech signal stored into a wave file and to display its FFT spectrum and waveform.

05-Sep-2014 | AN-No. 1GA66

The R&S®ZNA vector network analyzer enables reliable (high-gain) receiver and low-noise block converter (LNB) characterization with a R&S®ZNA two-port unit and a simple setup.

12-Jun-2025

The R&S®ZNA vector network analyzer enables comprehensive transmit/receive module (TRM) and active electronically scanned array radar (AESA) testing with a single connection.

12-Jun-2025

Automotive radar sensors concealed in bumpers must transmit in the correct frequency domain. To hide the sensors, radar-transparent areas are usually painted the same as the rest of the vehicle. You need to know bumper material propertiers when selecting paint and coatings. In the past, quasi-optical or waveguide based setups with vector network analyzers (VNA) were used. This application card describes a simplified material characterization method in the automotive radar frequency domain (76 GHz to 81 GHz) using the R&S®QAR50 automotive radome tester.

11-Jun-2025

Compliance and Pre-compliance testing are very important topics during the development of any Wireless DeviceIn this document the differences between Conformance testing vs. Pre-conformance tests will be explored as well as the Rohde & Schwarz offerings to conduct these tests

05-Jun-2025 | AN-No. 1C110

The purpose of this document is to provide a step-by-step guidance on how to perform VESA compliance testing on DisplayPort 80 cable assembly.Throughout this Method of Implementation (MOI), procedures will detail how to perform such VESA compliance testing using the R&S® ZNB lineup of Network Analyzers.

19-May-2025 | AN-No. 1SL414

The purpose of this document is to provide a step-by-step guidance on how to perform VESA compliance testing on DisplayPort 54 cable assembly.Throughout this Method of Implementation (MOI), procedures will detail how to perform such VESA compliance testing using the R&S® ZNB lineup of Network Analyzers.

19-May-2025 | AN-No. 1SL413

The purpose of this document is to provide a step-by-step guidance on how to perform VESA compliance testing on DisplayPort 8k cable assembly.Throughout this Method of Implementation (MOI), procedures will detail how to perform such VESA compliance testing using the R&S® ZNB lineup of Network Analyzers.

19-May-2025 | AN-No. 1SL412

New function for R&S®M3SR Series4400 radios

16-May-2025

The R&S®FSWP phase noise analyzer and VCO tester is a high-end instrument that accurately analyzes noise in key radar and communications system components. Phase noise measurements are used to derive the large-signal noise figure for a device under real-world operating conditions.

16-May-2025

Comprehensive test and validation of network slicing in 5G devices with dynamic resource allocation thanks to the CMX500 radio communication tester.

08-May-2025

R&S®RadEsT – electronic corner reflector

08-Apr-2025

R&S®RadEsT – radar multimeter

07-Apr-2025

Powerful tool for Rohde & Schwarz vector network analyzers (VNA) to simplify automated setup for complex measurements in R&D, verification and production labs

24-Mar-2025

Reverberation Chambers (RVC) have become popular as an alternative to Anechoic Chamber (AC) facilities for electromagnetic emission & immunity tests. Unlike AC, RVC reflects waves creating multipath environment. EMC testing using reverberation chamber is accepted in various EMC test standards across different industries. The RVC is cost effective allowing high field strength generation without excessive amplification needs, eliminates the need for complex positioning of antennas and DUTs increasing test speed and simulates real-world electromagnetic environments more accurately. To ensure accurate and efficient testing, specialized EMC test software is required for data acquisition, automation, and analysis. This application note describes how to setup Elektra and perform measurements in RVC.

20-Mar-2025 | AN-No. 1EE28

In the fast-paced world of automotive manufacturing, ensuring reliability and precision in radar sensors is paramount. Rohde & Schwarz provides advanced production testing solutions for automotive radar sensors and empowers tier 1 suppliers to deliver exceptional performance, safety and efficiency.

13-Mar-2025

Testing RF devices, like power amplifiers, requires a certain input power at the device under test (DUT). Sometimes, more power than a signal generator can deliver is needed. This may be the case when devices require higher input power, or when they need to be connected using long cables, which introduce large insertion losses at high frequencies. In these cases, an external amplifier can be used to deliver the required power to a DUT.This application note gives a guideline how to increase the power delivered to a DUT by an R&S®SMW200A vector signal generator using an external amplifier.It covers shifting the power reference plane from the generator output to the DUT input using an R&S®NRP power sensor and mitigating linear and nonlinear distortions using an R&S®FSW signal and spectrum analyzer.

12-Mar-2025 | AN-No. 1GP143

The shift from internal combustion engine (ICE) automobiles to electric vehicles (EV) has come with an array of new subsystems and components that introduce new EMC considerations. The level of complexity involved in automotive EMC testing increases with dynamic driving conditions where manufacturers not only have to refer to the framework standards offered, but must also improvise and establish new internal standards to ensure the vehicle and its internal components all function properly under all driving conditions. A number of challenges may arise when building a suitable test bench that thoroughly tests EVs and electrical components. This educational note dives into the development of dynamic EMC test systems, their inherent challenges, and how Rohde & Schwarz and AVL, one of the world’s leading mobility technology companies for development, simulation and testing in the automotive industry, have teamed up to provide a unified EMC test platform for dynamic driving conditions.

11-Mar-2025

The CMW500 wideband radio communication tester and the CMX500 radio communication tester are ideal for testing smartphones and tablets to meet EU energy efficiency index standards.

28-Feb-2025

The R&S®ZVA-Zxxx and R&S®ZCxxx mmWave converters extend the R&S®ZNA vector network analyzer frequency range up to 1.1 THz.

27-Feb-2025

Automated testing against the Chinese national GNSS test standard (GB/T 45086.1‑2024) with R&S®CMWrun sequencer software and the R&S®SMBV100B vector signal generator

20-Feb-2025

Debugging and verifying the DDR DRAM memory interface in a system design can be challenging. The R&S®RTP high-performance oscilloscope zone trigger is ideal for READ/WRITE separation as a basis for analyzing signal integrity.

06-Feb-2025