This Application Note introduces the new interferer management option, R&S SFU-K37 and describes how this can be used to generate various types of interfering signals for testing the performance of a receiver.

09-Jan-2007 | AN-No. 7BM50

Welcome to this introductory video show about the R&S® ZVA family of network analyzers. Network analysis is sometimes considered to be cumbersome and difficult to understand, a very offputting reputation for newcomers to network analyzers. To help you look at network analyzers in a different light, we have created this video series. We have intentionally refrained from explaining any theory in depth. Rather, we want to show you how to operate our analyzers for simple and useful applications. As well as just watching this video show, you can also use it as a guide and try yourself. All the operational steps shown only require a standard RF power amplifier which should be available in almost every lab. So, before we get properly started, we hope you enjoy this video show and much success in becoming familiar with network analysis in general, and our R&S products in particular.

13-Feb-2014 | AN-No. 1MA50

Almost every switched-mode power supply (SMPS) needs an EMI (Electro Magnetic Interference) input filter to suppress any disturbances of the SMPS on the power lines. This requirement having an input filter in the design ensures that no negative effect will occur in other parts of the systems connected to the power lines. Therefore, the design and the validation of the input filter is a major task during a typical power supply design. The conducted emission (CE) test according to a specific standard is a suitable and a common validation method to release the design at the end of the development cycle. Nowadays, this conducted emission test will be performed as pre-compliance test during the development phase in the lab as well. In this case, the designer will obtain an early feedback whether the design has to be optimized regarding any disturbances present on the power lines. In most cases, the designer has to adjust the input filter to obtain a more effective suppression of disturbances generated by the SMPS. However, the designer needs to know details about the noise spectrum to optimize the input filter as effective as possible. In addition to magnitude and frequency information of the noise source, it would be very helpful to know whether the noise is generated by a common mode source or by a differential mode source. During the standard conducted emission test, common and differential mode noise is a combination in the measurement results and thus not possible to gain deeper insights. This document will describe a method to separate common-mode and differential-mode separation using two oscilloscope channels. This separation approach works without any additional hardware component like a noise separator. The designer will be able to distinguish between common-mode (CM) and differential-mode (DM) noise. This additional information about the dominant mode provides the capability to optimize input filters very efficiently.

17-Sep-2020 | AN-No. GFM353

- not available -

20-Jul-2001 | AN-No. 7BM11

This paper explains how to use the Rohde & Schwarz IVI.NET instrument drivers in Visual Studio environment from the prospective of an occasional C# programmer in need of automating a measurement task.

31-May-2016 | AN-No. 1MA268

Testing radar warning equipment in realistic scenarios is crucial to reliable field performance. This typically involved dedicated instruments or test systems. Commercial vector signal generators (VSG) such as the R&S®SMW200A from Rohde & Schwarz have become a very attractive alternative thanks to their increased available bandwidth and processing power.

13-Aug-2020

Monitoring on up to 10 000 channels with different parameter settings

13-Jul-2012

RF interference is one of the largest contributors to poor network performance. It shows up in dropped calls and low data throughput rates. Traditionally, interference hunting means you get a list of sites with bad performance from an OSS. This defines the areas for interference hunting quite well.If, however, the problem remains after attempts at mitigation, it could be because other sources often mask symptoms of RF interference. Usually the strongest masking is due to the overlap between the interference signal and your network's signals. Analysis could involve complete cities or even countries, an error-prone task when using traditional spectrum analyzers and/or portable receivers and one that consumes a significant amount of time and budget.A more automated solution for larger areas can make the effort involved more manageable. The Rohde & Schwarz network scanner family (R&S®TSME, R&S®TSMA and R&S®TSMW) plus the network problem analyzer (NPA) feature of the R&S®ROMES4 measurement software is such a solution. It allows you to perform a fast drive test with a fleet of cars and collect spectrum data for your targeted or even complete network area in next to no time. Back at your office, the NPA tells you where to send dedicated interference hunting teams with an analyzer or receiver to track down the source of interference. This paper introduces the approach in detail.

02-Oct-2017 | AN-No. 1MA293

LTE is becoming the predominant wireless technology. Among several new features of this standard, the multiple input multiple output (MIMO) technology offers various advantages.It improves the throughput, extends the reach, reduces interference and improves the signal to interference plus noise ratio (SINR) with beamforming. LTE supports various modes in order to optimize the transmission settings.An LTE MIMO base station consists of a baseband unit, a remote radio head (RRH) and an array of up to eight antennas. The RRH upconverts the digital signals of the baseband unit into analog signals for each antenna.

08-Aug-2024

The R&S CMW500/270 can generate and measure standard-compliant WLAN IEEE 802.11ac signals with bandwidths from 20 MHz up to 160 MHz.This document explains the CMW solution for the signals with 160 MHz bandwidth and describes the required configurations step by step.

21-Oct-2013 | AN-No. 1CM101

Oscilloscopes are the workhorses for power electronics engineers. With powerful and easyto- use FFT analysis capabilities, their application fields extend to EMI debugging – and that saves a lot of time and money. A typical task is verifying the effectiveness of an EMI filter – early in the development phase.

23-Sep-2019

The R&S®SMA100A signal generator offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace signal generators, e.g. from other manufacturers, with the R&S®SMA100A without having to change the remote control code. This application note describes how to use the remote emulation feature in general. Furthermore, it describes in detail the remote emulation for each supported instrument, limitations of the individual emulations and the remaining differences between the emulated and the original commands.

17-Aug-2015 | AN-No. 1GP93

The R&S®SMA100B signal generator offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace signal generators, e.g. from other manufacturers, with the R&S®SMA100B without having to change the remote control code.This application note describes how to use the remote emulation feature in general. Furthermore, it describes in detail the remote emulation for each supported instrument, limitations of the individual emulations and the remaining differences between the emulated and the original commands.

11-Dec-2019 | AN-No. 1GP120

To simulate radar scenarios with frequency and level agility with high pulse density and long playtime, engineers can take advantage of the real-time sequencing capability of the R&S®SMW200A vector signal generator.

06-Jun-2017

The R&S®SK4105 HF high-power transmitter is ideal for air traffic service under harsh conditions such as those in Greenland

17-May-2023

Noise Power Ratio Signal Generation and Measurement

Noise Power Ratio (NPR) is an add-on tool for WinIQSIM™ to generate noise power ratio stimulus signals and measure the resulting noise power ratio of a device under test (DUT) using Rohde & Schwarz instruments via LAN or GPIB bus.

06-Nov-2015 | AN-No. 1MA29

Many serial interfaces use Manchester or non-return-to-zero (NRZ) coding. Oscilloscopes typically offer dedicated software options for debugging and testing the communications interfaces for common standards such as I2C, UART or CAN. The R&S®RTx-K50 option expands the addressable range of interface standards by adding decoding capability for standardized and proprietary Manchester or NRZ coded buses. It allows customizable configuration of the protocol structure that has to be decoded.

19-Oct-2020

Balanced RF components are advantageous compared to traditional single-ended components, since they cause less EMI, and are less susceptible to EMI. This application note describes the fundamental concepts of differential and common mode signals and of mixed-mode parameters, which are essential for balanced components. Techniques for the measurement of mixed-mode parameters are presented. Examples show the features implemented in the ZVB for balanced device measurement.

20-Sep-2004 | AN-No. 1EZ53

Keeping an ATSC (or ATSC Mobile DTV) single-frequency network (SFN) running smoothly not only requires that every single TV transmitter functions properly – the RF performance criteria echo pattern and frequency deviation also have to be strictly complied with. The R&S®ETL TV analyzer enables operators to check these crucial RF parameters at a glance with unmatched precision. The patented implementation achieves an echo delay resolution of one nanosecond, which is nearly a hundred times higher than in conventional approaches. This allows more precise control and adjustments of the several transmitters within the ATSC (or ATSC Mobile DTV) SFN and thus helps to ensure excellent coverage for the receivers.

21-Apr-2010 | AN-No. 7BM75

CERTIUM VCS is a purely IP based communications infrastructure that can be used to address shelter scenario challenges.

14-Jun-2023

The compact R&S®CMA180 Radio Test Set allows straighforward tests on devices that use analog or digital modulation and demodulation formats. This application note focusses on the use of the digital radio capabilities for measurements on radio transceiving devices in terms of their functionality and parameter characterization. Also shown is how to use the instrument with the various software tools available from Rohde & Schwarz for creating and evaluating digitally modulated signals. Various software examples are provided as free download along this paper. This application note addresses readers who develop, produce or optimize digital radio transmitting and receiving devices or maintain analog radio communication equipment alongside those with digital modulation.

10-Feb-2017 | AN-No. 1MA277

Make more accurate power rail measurements.

17-Jul-2018

10BASE-T1S Ethernet enables the integration of diverse sensors into an automotive-Ethernet vehicle supply system, for example short-range radar sensors for detecting blind spots or ultrasonic sensors for the parking assistant. For reliable operation of the functions, data transmission over 10BASE‑T1S Ethernet must be assured at all times and in every climatic environment. Functionality must be tested during development and in production. Only 10BASE-T1S Ethernet interfaces that have passed compliance testing in line with IEEE 802.3cg can be deployed in vehicles. Consequently, vehicle manufacturers and their suppliers need measuring equipment that allows them to perform these tests quickly and reliably.

15-May-2020

PAM-4 (4-level pulse amplitude modulation) has been introduced in high-speed serial data technology to reduce the bandwidth demands of ultra-high data rates. It uses only half the bandwidth per bit that would be required of conventional NRZ (non-return to zero) modulation. But at the same time, PAM-4 signaling complicates design and test at every turn. Evaluation of channels is now just as important to system development as serializer / deserializer (SerDes) testing and the challenges presented require a higher level of test and measurement performance than ever before. This paper investigates the evaluation complexities of PAM-4 interconnects at high data rates.

22-Oct-2020 | AN-No. GFM355

This application note describes how the most important fading tests for mobile phonesin all GSM frequency bands can be carried out cost-effectively using a combination of a CRTP/C02 Radiocommunication Tester and SMIQ Signal Generator.

23-May-2000 | AN-No. 1MA19

Using VISA (Virtual Instrument Software Architecture) several interfaces allow communication between your computer and instruments. This application note describes the usage of both - R&S® VISA- NI VISA running on Microsoft Windows 10™ with the following connection types: ► USB VCP (Virtual Com Port), also called USB CDC (Communications Device Class) ► USB TMC (Test and Measurement Class)► Ethernet Raw Port Socket► Ethernet in general e.g. VXI11 or HislipAll the examples are shown using the R&S® HMC8042 unless otherwise stated. There may be some difference when integrating other devices. As example some interface types are not available on every unit.This application note does not claim to be complete. All information has been compiled with care. However, errors can’t be ruled out.

28-Oct-2021 | AN-No. 1SL374

This application note describes how to generate test signals with Rohde & Schwarz signal generators of the R&S® SMx family (R&S®SMA100A, R&S®SMF100A, R&S®SML, R&S®SMT, and R&S®SMIQ) to perform interference testing on implantable medical devices using a small application software.

15-Jul-2009 | AN-No. RCS0812-0065

The R&S®CMP200 radio communication tester together with the R&S®CM-Z300A time of flight kit provides an accurate setup for time of flight measurements – in validation, calibration and certification.

27-Jul-2022

This Application Note describes the HSDPA uplink channel structure. Challenges for UE power amplifier design are outlined, and guidelines how to use R&S measurement equipment for testing UE power amplifiers are provided. An outlook on High Speed Uplink Packet Access (HSUPA) and the impact of HSUPA on the uplink channel structure is given.

11-Jul-2011 | AN-No. 1MA84

High Speed Downlink Packet Access (HSDPA) and High Speed Uplink Packet Access (HSUPA) optimize UMTS for packet data services in the downlink and uplink, respectively. Together, they are referred to as High Speed Packet Access (HSPA). Within 3GPP Release 7, 8, 9 and 10, further improvements to HSPA have been specified in the context of HSPA+ or HSPA evolution. This Application Note describes how HSPA+ features can be tested using Rohde & Schwarz instruments.

26-Apr-2013 | AN-No. 1MA121