For the transmission of digial audio data, different data formats are in use. The AES/EBU format, which is used in professional applications, as well as the S/P DIF format used in consumer electronics, transmit the audio data in time multplex for both channels. Additonal bits in the data stream cover complementary information, respectively are used for error detection.The generation and the analysis of those protocol data using the audio analyzers UPD or UPL is the topic of this application note. An extract of the AES3 standard informs about the basic definitions.

04-Jun-1998 | AN-No. 1GA15

This application note explains the concept of Adjacent Channel Leakage Ratio (ACLR) measurement on 3GPP W-CDMA signals with the spectrum analyzer FSP. Optimum operation for both the integrated bandwidth method and the new time domain method are shown via explanation of the signal behavior and the internal structure of the FSP. With the time domain method the spectrum analyzer family FSP provides a new approach featuring a very short measurement time compared to the integrated bandwidth method.

12-Jan-2001 | AN-No. 1EF41

Characterizing RF mixers that have an internal LO using the value-of-three R&S®FPC1500 spectrum analyzer.

15-Oct-2018

Testing the RF parameters of a WCDMA base station during the network rollout phase ensures subsequent trouble-free operation of networks as a basic prerequisite for general UMTS customer acceptance. This document describes a complete solution for testing the main transmission and reception parameters according to Specification 3GPP TS 25.141 FDD R99 on the basis of the R&S CMU300 Radio Communication Tester (RF measurements) and the NetHawk RNC/Iub Simulator (base station controller). The solution presented here is particularly recommended for installation measurements and regression tests on new UMTS system components.

15-Oct-2004 | AN-No. 1CM56

The R&S®MobileView app lets users operate Rohde & Schwarz instruments remotely and eliminates the need for physical interactions with the instruments.

04-Sep-2024

This application note illustrates the operation of the OFDM measurement software R&S FSQ-K96. It describes applications, setup, features, settings and results. Further it concentrates on generating the configuration file for R&S FSQ-K96, the appropriate IQ data files for Signal Analyzer R&S FSQ and waveform files for R&S Signal Generators. With this description the user obtains a complete R&S test solution for signal generation and analysis of generic OFDM signals.

17-Oct-2008 | AN-No. 1EF65

During wireless transmission over the air a signal is subject to fading. Since fading can strongly influence the communication, devices such as mobile phones must be tested under real-world conditions to verify their performance. The Rohde & Schwarz vector signal generators R&S®SMW200A, R&S®SMU200A and R&S®AMU200A make it possible to perform such tests. Their integrated real-time fading simulators reproduce well-defined and repeatable real-world test scenarios to bring reality into your laboratory. A multitude of standard-compliant, preconfigured fading scenarios make the configuration as easy as possible.This application note gives a brief introduction to fading and explains how to use the fading simulators in custom applications.

26-Apr-2013 | AN-No. 1GP99

Audio analyzers and test software from Rohde & Schwarz enable Dolby® licensees to subject their new products to the required compliance tests.

25-Jul-2014

Solution featuring the R&S®CMA180 radio test set and R&S®CMArun automation software

13-Mar-2019

CompactTSVP, monitoring systems, tire pressure, RF signal, microcontroller, ISM, wireless transmission Function Test of Tire Pressure Monitoring Systems Function Test of Tire Pressure Monitoring Systems CompactTSVP, monitoring systems, tire pressure, RF signal, microcontroller, ISM, wireless transmission Function Test of Tire Pressure Monitoring Systems Function Test of Tire Pressure Monitoring Systems

10-May-2006

Signal Generator SMIQ has versatile analog and digital internal modulation capabilities. Optional Fading Simulator SMIQ-B14 adds a variety of fading functions to the integrated digital modulation capabilities of SMIQ at a highly attractive price as compared with similar products. This application note describes how to apply fading to signals of any source and with any type of modulation (analog and digital) in a very convenient way.

09-Mar-1998 | AN-No. 1MA07

Digital pre-distortion (DPD) is a common method to linearize the output signal of a power amplifier (PA), which is being operated in its non-linear operating range.Most PAs operate in their non-linear range for efficiency reasons. The drawback of higher efficiency is the non-linear operating range. In order to maintain signal quality, many transmitters employ DPD. Implementing real-time DPD in a transmitter is a challenging task and often ends in PA models, which are specific to the signal transmitted.Even though these complex models are required for transmitter development, they are not needed during PA verification and development.This article describes an approach to generate a pre-distorted signal based on a hard-clipper. The resulting waveform pushes the output of the DUT as close to the hard-clipper as possible.Due to the waveform approach, the algorithm compensates all memory effects.

13-Sep-2017 | AN-No. 1EF99

The application note guides developers and manufactures of Sigfox Devices to perform the required and recommended measurements with test solutions from Rohde & Schwarz. The note will help bring ultranarrowband IoT devices and applications using Sigfox technology to the market as fast as possible and help ensure the desired quality and performance.For R&D, Pre-certification and QA, all currently defined Uplink- and Downlink- measurements are shown using the compact R&S®FPL1000 Spectrum Analyzer and R&S®SMBV100A Vector Signal Generator.For Production, use of the R&S®CMW100A Communications Manufacturing Test Set is shown for the most essential Uplink RF tests on Sigfox Devices.Python scripts for giving example SCPI commands demonstrate how measurements shown in manual use can easily be automated.

15-Nov-2017 | AN-No. 1MA294

Make more accurate power rail measurements.

03-Jan-2018

Using the internal R&S®ESMD-IGT GPS module and external GPS antenna in the R&S®ESMD wideband monitoring receiver

30-Apr-2013

IEEE 802.15.4 (ZigBee) uses Offset QPSK with a half-sine pulse-shaping filter as modulation. This application note describes how to set up the Rohde & Schwarz signal analyzers together with the corresponding vector signal analysis (VSA) personality for modulation quality measurements, especially EVM, for ZigBee.

12-Dec-2014 | AN-No. 1EF55

A new phase noise test instrument covers the frequency range from 1 MHz to 50 GHz with direct down-conversion analog I/Q mixers and baseband signal sampling. The traditional PLL has been replaced by a digital FM demodulator for phase detection and frequency tracking. An additional AM demodulator enables concurrent measurement of phase and amplitude noise. The instrument can measure phase noise as low as -183 dBc/Hz with a 100 MHz carrier frequency and 10 kHz offset within two minutes.

09-May-2016

This application note describes how to generate test signals for 13.56 MHz RFID modules according to ISO 15693 with R&S Signal Generators and analyze them with R&S Signal Analyzers using software R&S WinIQSIM™.

17-May-2006 | AN-No. RSI01

Compliance testing is essential to ensuring that dynamic random access memory (DRAM) signals meet the JEDEC specifications for parameters such as timing, slew rates and voltage levels. For system verification and debugging, eye diagram measurements are the most important tools for efficiently analyzing the signal integrity in any digital design. The specific nature of DDR requires a dedicated solution with a powerful read/write separation to get meaningful eye diagrams on the DDR data bus.

19-Feb-2019

R&S AVBrun, Broadcasting and Multimedia T&M, UltraHD R&S AVBrun Conformance testing solution for MHL/HDMI CTS sink/source R&S®AVBrun - Conformance testing solution for MHL/HDMI CTS sink/source R&S AVBrun, Broadcasting and Multimedia T&M, UltraHD R&S AVBrun Conformance testing solution for MHL/HDMI CTS sink/source R&S®AVBrun - Conformance testing solution for MHL/HDMI CTS sink/source R&S AVBrun, Broadcasting

14-Sep-2015

Measurements of very high noise figure components are performed for a number of reasons. For instance, in a wide range of applications, devices under test (DUT) are characterized within a complex test setup that includes high losses before or after the low noise DUT. In case of high frequencies, the switch matrix with complex signal routing and cables might have a very high loss. In other cases, the device might be embedded in a test setup where direct access is physically impossible, on-wafer probing is one example for this case. Using conventional measurement equipment, the noise figure measurement of such a device is very unstable if not impossible at all.

24-Jun-2020 | AN-No. 1EF110

The introduction of the transmission of compressed TV signals to MPEG2 and DVB for cable, satellite and terrestrial (COFDM) lead to the creation of many abbreviations that have to be explained to the “uninitiated”. In the previous three lines, three abbreviations whose meanings are not obvious have already been mentioned. A table explaining what these abbreviations mean is therefore essential.

20-Jul-2001 | AN-No. 7BM27

The aim of this application note is to provide information regarding Rohde & Schwarz (R&S®) instrument drivers for R&S®CMU200. This document describes how to use the R&S®CMU200 VXIPlug&Play drivers in Microsoft Visual Basic.NET or C# using Visual Studio.

30-Jun-2009 | AN-No. 1MA157

The R&S®RTO6 oscilloscope has an in-depth tool for debugging custom and commercial off-the-shelf serial buses for the avionics and aerospace industries.

20-Dec-2023

Today virtually every electronic device has a standby mode. Power consumption is regulated in most countries by increasingly stringent limits. This makes standardized power measurement essential.

12-Sep-2018

While Mobile phones are allowed to require approximately 3 time slots for switching from transmission to reception, base stations must be able to transmit and receive at a new frequency in every time slot in the frequency hopping mode. This behaviour must of course be tested and measurements carried out on the base station transmitter and receiver. Since there is no signal generator which is able to settle at different frequencies from one to the next time slot with GSM modulation, a solution to this problem was found by linking two Signal Generators SME in such a way that they alternately provide signals at different frequencies.

01-Jul-1999 | AN-No. 1GPAN28

The R&S® ZVA-Z110 converters offered for the R&S® ZVA family enable network analysis in the W band (75 GHz to 110 GHz). In this Application Note, measurements with three or four converters will be discussed. Test configurations for such measurements have so far been implemented only with coaxial connector systems for a frequency range up to approx. 40 GHz. The term 'multiport measurements' was created for this type of measurements.

09-Oct-2007 | AN-No. 1EZ56

The R&S®CMX500 radio communication tester is ideal for analyzing VoNR and VoLTE voice quality and performance in mobile devices.

21-Feb-2023

A Fabry-Pérot open resonator (FPOR) provided by QWED allows dielectric sheets to be accurately characterized in the frequency range from 110 GHz to 170 GHz using just one fixture.

14-Jan-2025

This application note introduces the IVI High Speed LAN Instrument Protocol (HiSLIP) and outlines its features. HiSLIP is the successor to the VXI-11 LAN remote control protocol. This document also describes guidelines for using this protocol.

12-Nov-2014 | AN-No. 1MA208