Welcome to our short video tutorials on how to test radars using Rohde & Schwarz test equipment. Access to most information about radar is pretty restricted, as many radar applications are military or secretive industrial research. To show you some basic Radar tests we have created RADAR demo tools, which functions at a frequency of 2.45 GHz, which is in the unlicensed 2.4 GHz Industrial, Scientific and Medical band. So we can even perform our tests in unshielded rooms. The frequencies are also used by radar operating in the ITU "S"-band from 2.3 to 2.5 GHz for air traffic control, weather and marine radar. The videos are suitable for 'from-the-scratch' introduction of R&S RADAR test equipment. They can also be used for plain introduction to the RADAR principle.

03-Feb-2014 | AN-No. 1MA209

VSC4G, VCS-G4, VSC, CERTIUM Rohde & Schwarz solution CERTIUM VCS CERTIUM VCS for VoIP radio interconnection with traditional VCS for step-by-step transition to VoIP VSC4G, VCS-G4, VSC, CERTIUM Rohde & Schwarz solution CERTIUM VCS CERTIUM VCS for VoIP radio interconnection with traditional VCS for step-by-step transition to VoIP VSC4G, VCS-G4, VSC, CERTIUM Rohde & Schwarz solution CERTIUM VCS

24-Jul-2023

GPRS (General Packet Radio Service) and EDGE (Enhanced Data Rates for GSM Evolution) provide data capabilities in widely deployed 2G networks reaching peak and average data rates of 384kpbs and 200kbps, respectively. Within 3GPP Release 7, further improvements to GPRS/EDGE have been specified in the context of EDGE evolution. This application note introduces key features of EDGE evolution and outlines the changes to the radio interface.

02-Apr-2008 | AN-No. 1MA129

This application note explains how to bring a CADENCE system which is attached to an R&S EX-IQ-BOX into service for the first time. The first part of the document shows how to setup an LTE Demo without using a UE design. This setup uses the R&S CMW500 as the downlink transmitter. The emulator receives the downlink via an R&S EX-IQBOX and passes it to an R&S spectrum analyzer (R&S FSx) via a second R&S EXIQ-BOX. The second part describes the real wiring using up- and downlink. This will only work if a UE design is available on the emulator.

30-Jun-2011 | AN-No. 1CM75

Offering bandwidths up to 160 MHz, the signal generators and analyzers from Rohde & Schwarz are ideal for testing IEEE 802.11ac signals

27-Jun-2013

The R&S®SMW200A vector signal generator has the outstanding ability to simultaneously generate up to eight independent signals from a single instrument. The advanced multi-channel architecture allows realizing even complex applications like MSR, carrier aggregation, MIMO or enhanced interference scenarios with a minimum of effort.This application note gives an overview of common multi-channel application examples and how to equip the Rohde & Schwarz signal generator R&S®SMW200A appropriately.

12-Mar-2018 | AN-No. 1GP106

Voice over IP for air traffic control

21-Nov-2014

The Federal Communications Commission (FCC) ruled that no later than February 17, 2009, all analog NTSC broadcasting must come to an end. It is therefore not surprising that the demand for ATSC receivers is high at the time this application note was published. ATSC TV sets and set-tops are subject to the ATSC recommended practice Doc.A/74 “Receiver Performance Guidelines” before they can be sold freely in the markets that adopted the standard. Although the number of tests defined in Doc.A/74 is less extensive then the ones for their DVB-T counterparts (EN62002, MBRAI), some clarification is nevertheless due.

27-Sep-2012 | AN-No. 7BM71

Power converter and inverter designs for higher power levels are usually based on hard switching half bridge configurations. In such setups, users must pay particular attention to proper switching operations to prevent shoot-through events. Setting up complex real-time trigger conditions using the R&S®RTE and R&S®RTO oscilloscopes increases the test coverage and robustness of converter and inverter systems.

10-Aug-2020

This document describes how the advanced calibration techniques of the ZVA Vector Network Analyzers can solve the challenges of measuring the S-Parameters on impedance matching devices. The document describes the concept and setup required to perform the calibration of the ZVA and making the measurement. The procedure described in this application note applies to the ZVB and ZVT Vector Network Analyzers as well.

06-May-2009 | AN-No. 1EZ59

This application note provides an introduction to the DDR memory technology and explains common challenges, related to the specific nature of DDR data, command / address and control buses and describes the typical measurements to verify and debug DDR system designs.The paper explains the recommended test points and the connection of oscilloscope probes as well as the compensation of effects from DDR interposers via deembedding. The document describes efficient Signal Integrity verification with eye diagram measurements, advanced triggering and TDR/TDT functionality. Given the high number of signal lines and the dynamic bus termination, SSN (simultaneous switching noise) has a significant effect in DDR memory designs and Signal Integrity as well as Power Integrity is highly pattern dependent. We introduce techniques to achieve high acquisition rates and help to efficiently detect worst case scenarios, affecting the performance of the overall memory design. The document also includes a close look on Power Integrity.Providing best practice examples in the design verification and debugging process, the document addresses all system designers and test engineers, working on DDR memory designs.

30-Oct-2020 | AN-No. GFM340

Performing essential RF tests gets your Sigfox device ready for certification and deployment

15-Nov-2018

The Rohde & Schwarz R&S®VTC and R&S®VTE video testers assess audio/video signals from the user's perspective (application testing). They are used to evaluate signal quality and to identify faults reliably. The tests are based on a difference analysis between the audio/video signal being tested and a reference signal. The required synchronization can be achieved by using a unique identifier, called a time code. This time code is inserted using the R&S®Time Code Inserter software described in this application note. This application note describes how time codes work and how to add a time code to any A/V file.

16-Apr-2013 | AN-No. 7BM84

LTE-M (also known as Cat M1) is a machine type communication (MTC) standard for IoT applications, specified by 3GPP. This application note provides and overview of the technology, the details of the standard and summarizes the R&S®TSMx scanner features for LTE-M measurements.

26-Jul-2019 | AN-No. 8NT04

For establishing a WLAN connection between R&S®CMW and device under test (DUT), the WLAN properties at the R&S®CMW have to be adapted to the test conditions. These can vary in several aspects, particularly due to the different WLAN standards and characteristics of the DUT. This document describes the critical parameters and provides step-by-step procedures for the configuration.

08-Dec-2015 | AN-No. 1C106

The R&S®SMB100A RF and microwave signal generator offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace signal generators, e.g. from other manufacturers, with the R&S®SMB100A without having to change the remote control code. This application note describes how to use the remote emulation feature in general. Furthermore, it describes in detail the remote emulation for each supported instrument, limitations of the individual emulations and the remaining differences between the emulated and the original commands.

20-Mar-2012 | AN-No. 1GP89

When analyzing the signal integrity performance of DDR interfaces, separating read and write cycles has been a challenging task. Comprehensive trigger capabilities are required – especially when attempting to recreate the eye diagram in realtime.

26-Sep-2018

Most of the tests specified in standard TS 34.121 that 3GPP WCDMA user equipment (UE) has to fulfill can be performed solely by the Universal Radio Communication Tester CMU200 universal radio communication tester. Other tests, however, require additional instruments for generating one or more interfering signals, for fading setup or for high dynamic spectrum analysis. This application note shows how easy it is to perform these tests with the remote-control software CMUgo, using the CMU200 in combination with R&S signal generators and R&S spectrum analyzers.

09-Dec-2008 | AN-No. 1MA130

IoT devices have tight requirements for power consumption in order to achieve expected battery life times of multiple years without a connection to a power supply. In order to verify the power consumption and expected battery life time, voltage and current have to be measured accurately for different operating states of the device under test.This application note explains battery life tests using RT-ZVC in combination with CMWrun and CMW500, including example applications.The solution by Rohde & Schwarz enables precise voltage, current and consequently, power measurements.The RT-ZVC Multi-Channel Power Probe can be driven as part of a test plan combining signaling and power measurements for a detailed view of the power consumption in different signaling states as well as an estimation of overall lifetime given a certain battery capacity.

17-Feb-2017 | AN-No. 1MA281

The R&S®VTC/VTE video testers analyze and evaluate the quality of set-top boxes and TVs on the DUT’s A/V interfaces from a user perspective. They provide the necessary quality tests from Go/NoGo tests to long-term stability tests. The RF input signals required for the DUT are generated by the R&S®VTC/VTE.

04-Feb-2014

Validating switching converter stability is vital for any power supply design. Frequency loop and load transient responses are often used to ensure switching converter stability. Even as frequency loop response becomes more important to design validation, load transient response is still commonly used. Load transient response can also be enhanced by visualizing the positive duty cycle for pulse width modulation (PWM) signals over time. A modern oscilloscope can do this, while also helping identify unknown converter effects.

09-May-2023

1SL391 audio, breakthrough, ETSI EN 301 489 Audio Breakthrough Assembly and Test Setup 1SL391 audio, breakthrough, ETSI EN 301 489

11-Oct-2022 | AN-No. 1SL391

Timing components such as low jitter oscillators and clocks are necessary to facilitate increasing data rates in high speed digital designs. As part of the overall system design, the components also have to perform in the system’s non-ideal power integrity environment and limit the power supply induced phase noise and jitter from power rail disturbances. Measuring the power supply noise rejection (PSNR) requires accurate generation and leveling of artificial, sinusoidal disturbances and measurement of resulting phase-noise and jitter impairments.

30-Sep-2020

This application note has been replaced by application note .

27-Oct-2009 | AN-No. 1MA56

The Rohde & Schwarz SFU supports several modes of level setting. This Application Note describes the differences between these modes and especially describes a method to achieve a seamless transition without any impact to the output signal during a change of settings on an Rohde & Schwarz SFU (Firmware version > 1.30).

23-Jun-2006 | AN-No. 7BM54

Signal generators are often used in automated test environment applications. The replacement of those instruments, e.g., due to malfunction or standard replacement procedures requires special care to be taken in consideration. Replacement of those instruments requires compabitiblity between the replacement and the replaced device in at least the electrical and remote-control features. This application note describes in detail how to use the emulation modes of the R&S® series SMA100A, SMB100A, SMF100A signal generators.

24-Jun-2008 | AN-No. 1GP71

This application note describes how to directly transfer S-Parameter Trace Data from R&S Network Analyzers to Microsoft Excel using a direct connection like GPIB or LAN. Prerequisites are a PC running Microsoft Excel, a R&S Network analyzer like ZVA, ZVB or ZVT as well as a working remote control connection between PC and instrument like GPIB or LAN / Ethernet.

22-Mar-2007 | AN-No. RSI02

Most of today's electronic devices draw non‑sinusoidal current. This gives rise to harmonic currents injected back into the public supply system. These need to be checked on all devices with the CE marking.

12-Oct-2018

A whole series of measurements has to be carried out for drafting an acceptance test report for a VHF sound broadcasting transmitter in compliance with ARD Specifications 5/3.1 (= TL 5820-3018 of the Deutsche Bundespost). As in most cases parameters like transmitter output power, frequency stability, spurious modulation, etc. have to be measured in the two stereo channels of the transmitter separately and at different modulation frequencies and frequency deviation, manual-controlled measurements are very time-consuming. In addition, a great variety of test equipment eg AF generator, stereodecoder, level meter, etc. is required for the measurements. FMAB with option FMA-B4 (AM/FM Calibrator / AF Generator) is ideally suitable for these measurements on VHF sound broadcasting receivers. The internal AF generator provides the signals required for the left and the right stereo channel. The MPX signal from the VHF transmitter is decoded by the built-in stereodecoder. As a result many of the tests and measurements required for the acceptance of VHF sound broadcasting receivers can be carried out without any additional test equipment being required. To give an example, a test program running under the graphics user interface Microsoft Windows has been developed for carrying out automatic power and modulation measurements via a PC.

04-Jun-1998 | AN-No. 1EF09

The following paragraphs are intended to show the capabilities of the Rohde&Schwarz Signal Generator SMT performing VOR air navigation receiver tests. The procedures presented should not be considered binding or mandatory. It is expected that the user once familiar with the use of SMT for VOR/ILS receiver tests will design and implement procedures which satisfy equipment and regulatory requirements.

06-Jul-1994 | AN-No. 1GPAN10