Vector network analyzers are used in high frequency applications to measure the complex scattering parameters of an unknown device-under-test (DUT). In general, the DUT characteristics can be evaluated by using electromagnetic waves. The correlation between the incident, reflected and transmitted wave quantities at the DUT is defined by its scattering matrix S.

28-Jul-1998 | AN-No. 1EZ30

Signal generators play a vital role in electrical test and measurement. They generate the test signals that are applied to components such as filters and amplifier, or even to entire modules, in order to ascertain and test their behavior and characteristics. The first part of this educational note presents the applications for and the most important types of signal generators. This is followed by a description of the construction and functioning of analog and vector signal generators. To permit a better understanding of the specifications found on data sheets, a closer look at the most important parameters for a signal generator is provided.Beyond the output of spectrally pure signals, a key function of RF signal generators is the generation of analog- and digitally modulated signals. The second part of this note therefore presents the fundamentals for the most significant analog and digital modulation methods.The third part of this educational note contains exercises on the topics of analog and digital modulation. All described measurements were performed using the R&S®SMBV100A vector signal generator and the R&S®FSV spectrum analyzer.

03-May-2016 | AN-No. 1MA225

The aim of channel sounding is to characterize a radio channel by decomposing the radio propagation path into its individual multipath components. This application note provided by Neul describes how channel sounding can be performed using the R&S SMBV100A Vector Signal Generator and the R&S FSL Spectrum Analyzer. To illustrate the procedure reference is made to 8 MHz wide white space channels in the UK.

13-Jul-2011 | AN-No. 1MA199

Despite the advent of advanced digital transmission methods, analog broadcasting remains highly important. Until now, measurements on FM transmitters in connection with acceptance testing, commissioning and maintenance required using a variety of T&M instruments.The R&S ETL TV analyzer combines these instruments' capabilities in a single unit and can completely replace them. Now, for the first time, acceptance test measurements can be conducted on FM transmitters quickly and easily using just one compact test instrument. The R&S ETL provides the functionalities of a power meter, spectrum analyzer, audio generator, FM measurement demodulator, stereo decoder, audio analyzer and more in just one box.

10-Sep-2013 | AN-No. 7BM105

Application Note 1MA81 has been replaced by .

05-Jan-2012 | AN-No. 1MA81

This Application Note describes two programs for calculating conversions: 1.: The Power Unit Calculator Power, dBm, dBmV and Volts @ 50 W 2.: The VSWR Calculator Reflection, VSWR, Return loss and Power reflection Reflections, Reflectionl to Mismatch Uncertainty.

03-Jul-1998 | AN-No. 1MA12

- not available -

02-Nov-2009 | AN-No. 7BM14

DOCSIS has become the established standard for return channels when it comes to implementing interactive services in broadband cable networks. The quality of these signals is essential to network efficiency. The analysis can be done using the highprecision R&S®ETL, R&S®EFA and R&S®FSH3-TV TV test receivers that have proven themselves in the downstream. These T & M instruments can be quickly and easily configured for measuring the upstream.

13-Jul-2012

Wireless coexistence testing

11-May-2020

Today’s infotainment units offer a wide range of features to truly embody the concept of the connected car.

14-Jun-2018

Analyze near-field signals and reduce electromagnetic interference (EMI) on boards and modules with the R&S®SpectrumRider FPH and the R&S®HZ-15 near-field probes.

27-Jun-2016

The Application Note summarises all measurements for WLAN test, according to the IEEE Standards 802.11a, b and g. For each measurement, an instrument list, test setups, test method, comments, typical results and implementation hints are included. The enclosed free of charge software provides all IEEE 488 bus sequences ready to run or copy into your own test environment.

28-Jul-2004 | AN-No. 1MA69

The numerous supply voltages of FPGAs, CPUs and DSPs need to be powered-up in a specific order to ensure reliable operation. It is crucial to verify this power sequencing during circuit design and product development.

08-Oct-2018

DC power supplies from Rohde & Schwarz can be connected and configured for synchronized on/off switching of all channels across multiple power supplies in intricate and complex systems.

28-Apr-2023

Many measurements in audio applications have to be monitored for compliance with specified limit values. Therefore, sometimes a whole series of measurements have to be compared with a fixed limit value, in other case it might be necessary to define different tolerances for example for different frequency ranges. Both can be done using Audio Analyzer UPD or UPL. This application note covers the different possibilities of limit checking, it demonstrates how to edit limit files and presents a program to easily generate files for checking the limits of frequency response measurements. Furthermore the display modes for different kinds of references are explained.

04-Jun-1998 | AN-No. 1GA33

Multiple Input Multiple Output (MIMO) is an integral part of LTE. Vector signal generators and signal & spectrum analyzers from Rohde & Schwarz support LTE measurements with up to 4 antennas. This Application Note covers 2x2 MIMO in the LTE downlink. Remote control programming is demonstrated by examples for a free-of-charge program.

09-Oct-2014 | AN-No. 1MA143

The R&S®FSW signal and spectrum analyzer is a high-performance instrument capable of measuring many key system and component parameters. Using the bit error rate (BER) functionality of the R&S®FSW-K70P option, the raw data error performance of a component or system can be accurately determined.

26-Sep-2018

This R&S®CMU200 1xEV-DO Release B non-signaling testing application provides the means to allow users to perform RF measurements on a 1xEV-DO Rel. B access terminal in a mode that does not require any signaling. This allows the calibration and final tests of a Rel. B AT, according to the minimum performance standards with the R&S®CMU200.

29-Jun-2009 | AN-No. 1CM74

This White Paper describes the implementation of real-time capabilities within the R&S®FSW (with option K160R) and the R&S®FSVR. It shows fields of application as well as the technical implementation.

20-Mar-2015 | AN-No. 1EF77

Radar test systems are essential in research, development, production and maintenance of radar systems. Most radar tests are expensive to carry out in the field and have a complicated setup and operation. One of the main advantages of the Radar Echo Generator presented in this application note is its ability to generate arbitrary virtual radar echo signals in real time in the laboratory using only commercial measuring equipment. The Radar Echo Generator not only allows to reproduce the results and automate the tests, but also it significantly reduces the measurement effort and costs while providing greater utility for the existing common test equipment. This application note presents a solution for testing the complete radar system by generating any kind of radar echo signals with arbitrary range, Doppler frequency and Radar Cross Section. The Radar Echo Generator makes it possible to perform real time tests on many applications including aerospace & defense and commercial radar systems.

01-Aug-2016 | AN-No. 1MA283

Broadband amplifiers are necessary for generating the field strengths required for most EMC radiated immunity tests. This Educational Note provides a brief overview of the role of amplifiers in EMC testing as well as a discussion of the parameters and characteristics which have the greatest influence on amplifier performance.Register now to download the Educational Note.

01-Aug-2022

For automated test applications, measurement time is often as important as the quality of the measurement. As with many situations, time is money. In practice, phase noise measurements are generally not considered fast, but test engineers still desire to save as much test time as possible. The Rohde & Schwarz®FSWP (FSWP) is a modern, digital signal processing based, phase-noise test set that performs many tasks in parallel in an effort to improve measurements speed. However, several measurement settings drastically affect measurement speed. This paper will discuss these settings and provide suggestions on improving overall measurement speed.The three key instrument parameters that affect FSWP measurement speed are:1. Number of cross correlations2. Resolution bandwidth (RBW)3. Offset frequency span

08-Oct-2020 | AN-No. GFM354

This application note describes the procedure used to install and deploy the LabVIEW driver libraries for the R&S CompactTSVP. All available wrapper VIs of *.DLL files from the R&S GTSL (Generic Test Software Library) development framework are now conveniently accessible via the LabVIEW menu item 'user.lib'. This common recipe also allows all upcoming versions of the R&S GTSL to be deployed, for safe and seamless updating of future R&S GTSL enhancements.

28-Dec-2007 | AN-No. 1SP805

Load pull is a powerful method for characterizing RF power amplifiers through impedance variation. Load pull enables model extraction and validation as well as performance, ruggedness and efficiency testing.

02-Sep-2020

This application note provides information about measurements on DVB-S2 transmitters, including Amplitude Phase Shift Keying (APSK) signals. Specifically, this note will discuss how to import APSK mapping files in order to make modulation quality measurements.

09-Feb-2010 | AN-No. 1MA172

The following application note describes the function and operation of user menus for FSE Spectrum Analyzers including option Vector Signal Analysis (FSE-B7). For measurements according to the GSM standard user menus are provided, which perform settings on FSE for Base Station testing required in the standard. The menu and the accompanying setups are stored on a floppy disk. For operation of the menus firmware version 1.40 or higher is required. Option Vector Signal Analysis FSE-B7 has to be installed for the use of the application menu.

16-Jan-2002 | AN-No. 1EF23

Fading in the baseband of the R&S®SMW200A signal generator is well proven and widely accepted for testing any mobile radio standard. However, there are applications where an RF signal must be faded.A versatile RF Fading Simulator can easily be built using an R&S®FSW, R&S®FSQ, R&S®FSG, R&S®FSV signal analyzer with Digital Base Band Interface or with the instrument combination R&S®TSMW / R&S®IQR and an R&S®SMU signal generator with digital baseband inputs and fading simulator option. Note describes how.

27-Feb-2015 | AN-No. 1MA145

This application note explains the fundamentals of the cell search and cell selection and reselection procedures required for both modes of UMTS Long Term Evolution: FDD and TDD. It describes how to generate and analyze the required signals using Rohde & Schwarz test and measurement solutions. The application note also shows how to perform interoperability tests and terminal conformance tests according to the baseline of the 3GPP specifications for protocol conformance and Radio Resource Management (RRM).

17-Sep-2009 | AN-No. 1MA150

This application note explains the measurements on 3GPP Base Station Transmitter signals according to TS 25.141, using the Signal Analyzer FSIQ with the Code Domain Power application firmware FSIQ-K72.

17-Aug-2001 | AN-No. 1EF44

The Electromagnetic Disturbance (EMD) emitted by Proximity-Integrated-Circuit-Cards (PICC) is a unwanted form of load modulation. This Application Note describes a method for measuring EMD during data transmission using vector signal analysis

19-Oct-2007 | AN-No. 1MA120