9053 Results
Function Test of Tire Pressure Monitoring Systems
10-May-2006
Camera, display and multimedia testing on automotive in-vehicle infotainment (IVI) systems
24-Apr-2018
In this Application Note, illustrative measurements of individual RFFE components, as well as a complete RFFE, will be made.
27-Feb-2017 | AN-No. 1MA299
The power consumption analysis tool was developed to make it easier for customers to analyze power consumption data collected with either the NGL, NGM or NGU power supplies from Rohde & Schwarz. It allows to easily capture power consumption data and analyze using basic measurements.
31-Jan-2022 | AN-No. 1SL380
Modern communications devices support a large number of standards in a very small space, which can lead to interference due to occupying the same frequency bands.
14-Mar-2016
Digital pre-distortion (DPD) is a common method. This article describes an approach to generate a pre-distorted signal based on a hard-clipper.
13-Sep-2017 | AN-No. 1EF99
R&S®ESMD Increasing timestamp accuracy in TDOA applications - Application Card
30-Apr-2013
EVM Measurements for ZigBee signals in the 2.4 GHz band
12-Dec-2014 | AN-No. 1EF55
This application note describes a technique to perform the noise figure measurement with FSW-K30 on lossy devices like attenuators with high loss in front of the low noise amplifiers.
24-Jun-2020 | AN-No. 1EF110
Description of 20 MHz demodulation bandwidth for level measurement with the R&S®EB500 monitoring receiver.
09-Oct-2012
Load pull is a powerful method to characterize RF power amplifiers and enablse model extraction and validation and performance, ruggedness and efficiency testing.
02-Sep-2020
This application note examines both the theory and practice of state-of-the-art spectrum analysis by discussing specific measurements taken on an integrated RF amplifier.
05-Mar-2013 | AN-No. 1MA201
EMI debugging using fast FFT with MXO oscilloscopes
07-Feb-2024
Power Calibration of Vector Network Analyzer ZVR
29-Jul-1998 | AN-No. 1EZ41
Measuring RDS(on) with high-definition oscilloscopes - Application Brochure
19-Mar-2015
The R&S®ZNA vector network analyzer with integrated LO output and direct IF input options is a simple, cost-effective solution for 2-port and 4-port measurements using Rohde & Schwarz mmWave converters.
19-Jul-2021
This application note explains step by step all necessary settings for transmitting parameters of the disturbance signal from an EMS test to a dAV Camera System via serial port or LAN interface
10-Dec-2019
This application note describes how to use the R&S®RTO, R&S®RTE and R&S®RTM Digital Oscilloscopes for EUT monitoring of signal forms.
20-Apr-2015 | AN-No. 1MA242
Bluetooth Transmitter Measurements without Connection Setup
04-Feb-2003 | AN-No. 1MA49
The R&S®RTx-K36 frequency response analysis option provides a low-cost alternative to low frequency network analyzers or dedicated standalone frequency analyzers.
18-Dec-2018
This application note provides a description of the Rohde & Schwarz Click Rate Analyzer software.
15-Jan-2015 | AN-No. 1EE25
Hints and Tricks for Remote Control of Spectrum and Network Analyzers
19-Aug-2014 | AN-No. 1EF62
Protocol Analysis at Digital Interfaces using the Audio Analyzers UPL and UPD
04-Jun-1998 | AN-No. 1GA15
Air Traffic Control (ATC) radar, military Air Traffic Surveillance (ATS) radar and meteorological radar operate in S-Band frequency range. In fact 4G communication systems such as Long Term Evolution (LTE) make also use of these frequencies.
28-Mar-2014 | AN-No. 1MA211
Measurement of Adjacent Channel Leakage Power on 3GPP W-CDMA Signals with the FSP
12-Jan-2001 | AN-No. 1EF41
This application note illustrates the operation of the OFDM measurement software R&S FSQ-K96. It describes applications, setup, features, settings and results.
17-Oct-2008 | AN-No. 1EF65
This application note describes how to use the LTE Frequency Division Duplex (FDD) and Time Division Duplex (TDD) measurement functionality.
09-Apr-2015 | AN-No. 1CM103
How to Run WCDMA BER/ BLER Tests Using R&S Vector Signal Generators
06-Mar-2009 | AN-No. 1MA144
Combining a low-noise oscilloscope with a power rail probe, developed uniquely for measuring power rails, provides a measurement system that delivers measurements that are more accurate.
09-Jul-2020