9100 Results
Usage of Data Reduction in R&S©EMC32-K10 EMI Auto Test Templates
16-Nov-2011 | AN-No. 1SP02
The first part of this educational note presents the applications for and the most important types of signal generators. This is followed by a description of the construction and functioning of analog and vector signal generators.
03-May-2016 | AN-No. 1MA225
3GPP User Equipment Tests Under Fading Conditions with CMUgo and R&S CMU200 / R&S SMU
05-Jan-2012 | AN-No. 1MA81
Conversion Calculator for Power Units and VSWR/Reflection
03-Jul-1998 | AN-No. 1MA12
R&S BCMux, R&S SFU Interoperability tests of DVB-T2 receivers - Application Card
18-Apr-2013
Analyze near-field signals and reduce electromagnetic interference (EMI) on boards and modules with the R&S®SpectrumRider FPH and the R&S®HZ-15 near-field probes.
27-Jun-2016
The ground connection on the R&S®RT‑ZMxx modular multimode probes can be used to improve measurements on high-speed differential interfaces.
29-Jan-2025
R&S VCS-4G VoIP for Air Traffic Control (for drilling companies / offshore industry)
15-Oct-2012
This application note explains how to measure the oscilloscope ENOB and shows results for the R&S®RTO for different settings.
13-May-2011 | AN-No. 1ER03
Controlling multiple DC power supply channels (R&S®NGL200/NGM200)
28-Apr-2023
This Application Note covers 2x2 MIMO in the LTE downlink. Remote control programming is demonstrated by examples for a free-of-charge program.
09-Oct-2014 | AN-No. 1MA143
The R&S®FSW signal and spectrum analyzer is a high-performance instrument capable of measuring many key system and component parameters. Using the bit error rate (BER) functionality of the R&S®FSW-K70P option, the raw data error performance of a component or system can be accurately determined.
26-Sep-2018
Measurements on Tuners using the Audio Analyzers UPL or UPD and Signal Generator SMT
16-Feb-1998 | AN-No. 1GA24
The R&S®Pulse Sequencer software automatically uploads the interpreted PDW lists on the R&S®SMW200A to generate the most agile radar signals.
20-Feb-2018
Calibration and Verification Solution
The UWB (Ultra-Wideband) technology is a short range wide-band radio technology specified for device to device communication operating in unlicensed spectrum. It is an RF positioning technology that enables accurate and secure peer-to-peer ranging between mobile devices with robust resistance to interference while consuming very low energy and coexisting well with other radio communication systems. UWB is used for a variety of different applications, such as asset tracking, secure payment, personal tracker, real time location services and keyless access and start of a vehicle etc. According to ABI Research forecasts, there will be well over 1 billion UWB annual device shipments by 2026. Almost every smart phone shipped in 2026 will support UWB services.Talking about testing aspect of a UWB device, in general two test methodologies can be adopted as other wireless products, either the traditional testing mode (so-called conducted test mode) with wired RF connection between the test measurement equipment and device under test (DUT) or over the air (OTA) test mode in an OTA anechoic chamber. Sometimes, it is not always possible or necessary to perform the tests under conducted mode due to the limiting factors, e.g. cost, space, complexity and direct access to the RF connectors of the product. In this case, OTA testing is then becoming a non-evitable approach. Moreover, OTA testing reflects the usage of DUT in a real condition.In this application note, R&S® OTA test solution covering transmitter (Tx), receiver (Rx) and Time of Flight (ToF) testing in Wireless Automated Testing (WMT) environment is described. The measurement results throughout the whole document are based on NXP Trimension™ NCJ29D5 UWB automotive IC.
12-Apr-2023 | AN-No. 1SL394
Level Uncertainty Calculation for R&S FSV Signal and Spectrum Analyzer
21-Apr-2010 | AN-No. 1EF63
Assisting Tools for Operation of Windows-Based T&M Instruments
13-Jun-2013 | AN-No. 1MA218
Stable operation in all circumstances is essential for power converters. Different working conditions, such as load steps, startup/shutdown sequences and input voltage variation, apply to most converter types. In addition to the standard feedback control loop, integrated pulse width modulation (PWM) controllers provide extended functions, such as line feed-forward loop control and soft-start control.
11-Oct-2023
This application note shows all necessary settings for performing Dual Receiver Measurement using the R&S®EMC32-K27 option via R&S® EMC32 Measurement Software.
28-Sep-2017 | AN-No. 1SP20
R&S IMS / Software Configuration and System Calibration according IEC / EN 61000-4-6 (conducted immunity)
29-Mar-2007 | AN-No. 1SP33
Measurement of Power Ramps of GSM, DCS1800 and PCS1900 Signals with Spectrum Analyzers of the FSE Family
16-Jan-2002 | AN-No. 1EF18
Measurements on PCS1900 Base Stations According to J-STD-007
17-Jan-2002 | AN-No. 1EF24
This white paper introduces measures to minimize malware threats and discusses ways to reduce risks while insuring that instrument performance is not compromised. The paper also discusses the use of anti-virus software in combination with Embedded Linux based instruments.
23-Nov-2016 | AN-No. 1GP112
Base station analysis with cellular network analysis
02-Aug-2024
Analyzing power designs for high-speed SoCs with multiphase buck converters
13-Jan-2025
Simplifying mixer measurements with the R&S ZNB
01-Oct-2013
The R&S®RTE is the best choice for analyzing small signals such as ECG signals with high signal fidelity.
17-Nov-2015
The R&S®SMW200A vector signal generator is ideal for high-precision RF and microwave tests requiring deembedding of the device under test (DUT).
11-Oct-2017
This application note highlights RF measurement challenges and introduces Rohde & Schwarz equipment required for RF characterization.
08-May-2017 | AN-No. 1MA275