9100 Results
This application note describes methods using an R&S®ZVA network analyzer to accurately measure all the key parameters of frequency converters.
30-Apr-2015 | AN-No. 1MA224
The R&S®RTM3000 and R&S®RTA4000 offer pulse width modulation (PWM) track analysis functionality, which is a great feature for verifying and optimizing soft start.
09-Jul-2019
How to perform automated GNSS receiver tests using the R&S®SMBV100A vector signal generator. The presented tests include TTFF, sensitivity, and location accuracy measurements, moving receiver and interference tests, and many more.
29-Jul-2014 | AN-No. 1GP86
1MA210 - Testing LTE Release 9 Features. This Application Note describes the T&M methods for LTE Release 9 features using Rohde & Schwarz instruments.
26-Apr-2013 | AN-No. 1MA210
This document describes the direct test mode mechanisms for testing Bluetooth Low Energy devices and explains how the direct test mode connection is established. The R&S CMW uses a USB port for the direct test mode connection while the Equipment under Test (EUT) may provide a USB port, a serial port or even a 2-wire UART interface for this purpose. Installing or assigning the right driver for the EUT is the main configuration task on the R&S CMW. For EUTs with USB port, the R&S CMW provides a Bluetooth Low Energy USB driver which has to be assigned to the connected EUT.
14-Dec-2016 | AN-No. 1C105
This application note introduces the R&S®Pulse Sequencer software and outlines necessary steps to generate a real life RF signal environment.
17-Jan-2017 | AN-No. 1MA288
The R&S Scope Rider is a modern versatile handheld oscilloscope featuring lab oscilloscope performance with the ruggedness of a battery operated handheld device.
04-Jan-2016
The document gives an overview and user guide about a link budget calculator for the main components of a basic OTA system. Accomopanied by an Excel sheet containing the Link Budget Calculator.
19-Mar-2019 | AN-No. 1EF104
WCDMA Signal Generator Solutions by Rohde & Schwarz
27-Nov-2000 | AN-No. 1GP39
This application note describes how to detect even small fails in dynamic turn indicators with R&S®AdVISE.
30-Jul-2020 | AN-No. 1S006
This application note describes topics such as: characteristics and implementation of RF signal paths, image responses etc. for the R&S®ESW EMI test receiver.
19-Nov-2020 | AN-No. 1EE26
The R&S ® EDST300 efficiently and precisely analyzes TACAN and DME ground stations, making it ideal for commissioning and regular maintenance.
16-Feb-2017
Measurement of Adjacent Channel Power on Wideband CDMA Signals
17-Mar-1998 | AN-No. 1EF40
This application note addresses the diverse possibilities of interoperability between Rohde & Schwarz power sensors and Rohde & Schwarz signal generators. All current and many legacy Rohde & Schwarz signal generators offer the capability of directly connecting power sensors. This enables power measurements without the need of a base unit or separate PC to display the readings. Furthermore, sensors can be used for special tasks like filling a user correction table or continuously controlling levels at crucial points in the measurement configuration.
31-Aug-2023 | AN-No. 1GP141
The R&S®NGM202/R&S®NGL202 power supply solution offers designers great functionality and performance to measure, evaluate and optimize converter efficiency.
02-Jun-2020
SITLine ETH: Highly secure data center connection for file and content applications
27-Jan-2014
Quality automotive radome tester analyzes your radar integration
27-Aug-2019
A deep, segmented memory combined with dedicated trigger conditions solves this problem by permitting the acquisition of relevant sequences without long pauses.
01-Dec-2017
R&S®CEPTOR – The military spectrum monitoring solution
25-Oct-2024
IQWizard - IQ Signal Measurement and Conversion
26-Apr-2013 | AN-No. 1MA028
Guidelines for MIMO Test Setups – Part 1
10-Mar-2010 | AN-No. 1GP50
(E)GPRS Measurements with R&S CMU200 and CMUgo
07-Sep-2004 | AN-No. 1CM52
Next generation technologies in radar and satellite communication with high data rates call for innovative testing solutions to develop and manufacture RF components like voltage controlled oscillators (VCO). The R&S®FSPN phase noise analyzer increases efficiency and reproducibility of VCO characterization and phase noise measurements from lab to production.Voltage controlled oscillators are oscillators whose output frequency is controlled by means of an external tuning voltage, and they are used in a wide variety of electronic and RF applications like function generators, phase-locked loops including frequency synthesizers used in communication equipment. Different VCO design approaches yield different parameters and performance, and therefore it is important to measure or characterize VCOs under different conditions. This application note provides a short technical introduction to voltage controlled oscillators and explains the most common and the most important measurements made during the VCO characterization process.
17-May-2023 | AN-No. 1SL386
This application note describes how to use the UWB measurement functionality provided by R&S®CMP200 radio communication tester to perform HRP UWB PHY measurements for R&D and production purposes.
19-May-2021 | AN-No. GFM362
Remote Setup for 3G High Dynamic Multi Charrier Signals with SMIQ03HD and FSU / FSQ
13-Dec-2002 | AN-No. 1MA62
High-Speed Remote Control
12-May-2016 | AN-No. 1GP107
Using R&S®ELEKTRA Migration Tool
The R&S®ELEKTRA EMC test software is the successor of the R&S®EMC32 EMC measurement software. Like the R&S®EMC32 EMC measurement software, the R&S®ELEKTRA offers a solution that controls complete EMC systems and automates measurements on equipment under test (EUT) that is being tested for emissions (EMI) and immunity (EMS) compliance. It has more features and test types compared to R&S®EMC32.As both software platforms use different file formats, R&S®EMC32 users who upgrade their existing software to the R&S®ELEKTRA platform need to perform a file conversion before migrating their data to the R&S®ELEKTRA platform. This is done by using the R&S®ELEKTRA Migration Tool, which is installed automatically with each R&S®ELEKTRA installation.This Application Note describes how to use the R&S®ELEKTRA Migration Tool (version 4.4 onwards) for converting the backup data into the XML format that can be interpreted by the R&S®ELEKTRA software. It also provides recommended conversion steps (Chapter 5) and troubleshooting tips (Chapter 6). For instructions on migrating the data using R&S®ELEKTRA Migration Tool below version 4.4, refer to the R&S®ELEKTRA user manual. For better user experience, we recommend using the latest software version for migration.This Application Note does not describe the steps to backup data using the R&S®EMC32 or R&S®ES-SCAN software. For procedures on how to do so, refer to their respective manuals.
04-May-2023 | AN-No. 1SL396
The R&S ® TSStream multi-TS streaming software streams a number of MPEG transport stream files simultaneously over a single IP interface.
16-Mar-2017 | AN-No. 1GP113
R&S CMWrun Sequencer Software Tool
20-Feb-2015