GPRS (General Packet Radio Service) and EDGE (Enhanced Data Rates for GSM Evolution) provide data capabilities in widely deployed 2G networks reaching peak and average data rates of 384kpbs and 200kbps, respectively. Within 3GPP Release 7, further improvements to GPRS/EDGE have been specified in the context of EDGE evolution. This application note introduces key features of EDGE evolution and outlines the changes to the radio interface.

02-Apr-2008 | AN-No. 1MA129

New technologies and applications like 6G communications and sensing extend into sub-THz frequencies in the D band and beyond. New semiconductor technologies and processes need to be commercialized to support these efforts.

12-Dec-2023

This application note describes how to connect a communication tester CMU200 with B-17 (IQ-IF interface option) to a ABFS fading simulator with B-49 dynamic fading option (3GPP) for generating signals under fading conditions. An additional program performs a semi automatic level correction of power fed to the user equipment.

25-Jun-2008 | AN-No. 1MA54

For cable TV, the "last mile" to the connection at the home is the bottleneck that prevents higher data rates. The last mile is made up of optical fiber and coaxial cables, amplifiers and electrical/optical converters. This mix of optical fiber and coaxial cables is known as a hybrid fiber coax (HFC) network. One option for cable network providers to maximize both the downstream (DS) and upstream (US) data throughput using the existing cable TV network, but without making expensive changes to the HFC network infrastructure, is to employ the data over cable service interface specification (DOCSIS) 3.1.This Application Note discusses the fundamental technological advances of DOCSIS 3.1 and presents measurement solutions from Rohde & Schwarz.

02-Mar-2015 | AN-No. 7MH89

The R&S®RTO / R&S®RTE oscilloscope is a valuable tool for analyzing EMI problems in electronic designs. High input sensitivity, high dynamic range and a powerful FFT implementation are key features for capturing and analyzing unwanted emissions.

26-Feb-2015

This application note describes how to create and generate standard-conform IEEE 802.15.4 test signals with the Rohde & Schwarz Vector Signal Generators (VSG).

08-Jan-2016 | AN-No. 1GP105

Combining the R&S®Pulse Sequencer software with one of the vector signal generators from Rohde & Schwarz is the perfect solution for defining and playing pulses.

09-May-2017

The Rohde & Schwarz R&S®VTC and R&S®VTE video testers assess audio/video signals from the user's perspective (application testing). They are used to evaluate signal quality and to identify faults reliably. The tests are based on a difference analysis between the audio/video signal being tested and a reference signal. The required synchronization can be achieved by using a unique identifier, called a time code. This time code is inserted using the R&S®Time Code Inserter software described in this application note. This application note describes how time codes work and how to add a time code to any A/V file.

16-Apr-2013 | AN-No. 7BM84

Validating switching converter stability is vital for any power supply design. Frequency loop and load transient responses are often used to ensure switching converter stability. Even as frequency loop response becomes more important to design validation, load transient response is still commonly used. Load transient response can also be enhanced by visualizing the positive duty cycle for pulse width modulation (PWM) signals over time. A modern oscilloscope can do this, while also helping identify unknown converter effects.

09-May-2023

Recent mobile test methods could not evaluate the quality of data reduced speech signals with different coded and decoded signals. The Perceptual Evaluation of Speech Quality (PESQ) provides the solution for this measuring problem. WCDMA PESQ is an add-on tool for CMUgo for automatic measurement of the PESQ for WCDMA mobile phones according to recommendation ITU-T P.862.1 featuring selectable fading profiles and variable Additional White Gaussian Noise (AWGN).

05-Jan-2012 | AN-No. 1MA137

Integrated end-to-end data solution with IP traffic analysis and protocol statistics allows detailed analysis of data traffic generated by IoT and mobile devices.

06-Jun-2017

This application note has been replaced by application note .

27-Oct-2009 | AN-No. 1MA56

The Rohde & Schwarz SFU supports several modes of level setting. This Application Note describes the differences between these modes and especially describes a method to achieve a seamless transition without any impact to the output signal during a change of settings on an Rohde & Schwarz SFU (Firmware version > 1.30).

23-Jun-2006 | AN-No. 7BM54

During the design process of chipsets or modules, FPGA-based hardware emulators are utilized to perform early tests with real test and measurement instruments. These hardware emulators usually run at artificially reduced speed, but apart from that function like the finished design. In this application note we explain how to test FPGA-based hardware emulators using Rohde & Schwarz vector signal generators for creating suitable real-time test signals at reduced sample rates. We further explain how to correctly adapt AWGN signal generation and fading simulation for “slow I/Q”.

10-Dec-2012 | AN-No. 1GP95

Two R&S®ETL TV analyzers or two R&S®ETC compact TV analyzers are used to measure the receive level of a car antenna against that of a reference antenna. The R&S®BCDRIVE broadcast drive test software exports measured data for display in Google Earth.

19-Feb-2015

Modern radio communication systems have to provide higher and higher data rates. As conventional methods like using more bandwidth or higher order modulation types are limited, new methods of using the transmission channel have to be used. Multiple antenna systems (Multiple Input, Multiple Output – MIMO) gives a significant enhancement to data rate and channel capacity. This application note gives an introduction to basic MIMO concepts and terminology and explains how MIMO is implemented in different radio communications standards.

02-Jul-2009 | AN-No. 1MA142

The converters offered for the R&S® ZVA family extend the vector network analyzers' frequency range to include the millimeter-wave range (EHF band). This Application Note describes the R&S® ZVA-Z110 converters. They cover the W band (75 GHz to 110 GHz). Several measurement examples are included, explaining in detail how to configure a converter-based vector network analyzer system.

09-Oct-2007 | AN-No. 1EZ55

The R&S®SMF100A microwave signal generator offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace signal generators, e.g. from other manufacturers, with the R&S®SMF100A without having to change the remote control code. This application note describes how to use the remote emulation feature in general. Furthermore, it describes in detail the remote emulation for each supported instrument, limitations of the individual emulations and the remaining differences between the emulated and the original commands.

11-Oct-2016 | AN-No. 1GP92

Some of the new Rohde & Schwarz instruments, such as the R&S®OSP and R&S®FSC, only have a LAN interface. To be able to operate these instruments in a purely GPIB system, a converter must be connected between the instrument and the GPIB. Rohde & Schwarz now offers such a GPIB to LAN converter.

03-Aug-2010 | AN-No. 1SP30

Digital pre-distortion (DPD) is a common method to linearize the output signal of a power amplifier (PA), which is being operated in its non-linear operating range.The R&S K18D application family offers a very easy-to-use method to pre-distort amplifiers without modelling the DUT.However, many engineers in PA design request a simple and easy-to-use tool that delivers a DPD model applicable to any real-world signal.This application note with the accompanying software tool allows engineers without in-depth knowledge of DPD or remote programming to generate a DPD model and verify it against the DUT, based on the results of the K18D application.

25-Mar-2019 | AN-No. 1EF105

The R&S®NRP2 power meter offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace power meters, e.g. from other manufacturers, with the R&S®NRP2 power meter without having to change the remote control code. This application note describes how to use the remote emulation feature in general. Furthermore, it describes in detail the remote emulation for each supported instrument, limitations of the individual emulations and the remaining differences between the emulated and the original commands.

28-Feb-2012 | AN-No. 1GP83

The R&S®SMW200A GNSS simulator offers an easy and convenient way to test your receiver design against a wide variety of potential interferers and jammers. Test cases extend from simple coexistence simulations to complex interference scenarios with localized emitters.

28-Jan-2019

With the extension of the 3GPP FDD system to include HSDPA, the HS-DPCCH has been added as a new code channel in the uplink. This Application Note describes the transmitter measurements provided by the CMU200 to perform the transmitter measurements defined in TS 34.121 in presence of the HS-DPCCH. CMU200 receiver measurements according to TS 34.121 that measure the throughput and the CQI reporting are described. Subject to change – T. Braun, November 2005 - 1CM62

25-Nov-2005 | AN-No. 1CM62

Modulation Analyzers FMA (up to 1.36 GHz) and FMB (up to 5 GHz) are high-grade FM demodulators from Rohde & Schwarz with highly stable synthesizer, low-noise FM demodulator, automatic frequency tuning and fine-tuning, separation of AM from FM,all of which make Analyzers FMA/FMB ideal for phase noise measurements.

03-Jun-1998 | AN-No. 1EF15

The terrestrial television standard DVB T2 is gaining in significance as a result of the growing scarcity of available frequencies. New systems are being tested in many countries around the world. Other countries have already completed the introductory phase for DVB T2. Broadcasting transmitters are subject to particularly stringent standards with respect to broadcast signal quality, because even small faults can lead to service disruptions for many viewers or even disrupt adjacent channels.A single instrument, the R&S®ETL TV analyzer, performs all required DVB-T2 transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commissioning and preventive maintenance.The measurements described here satisfy many country-specific and customer-specific test specifications. Users need only set the limit values accordingly.

23-Jul-2014 | AN-No. 7BM106

The R&S®SITLine ETH's military-grade cryptography secures monitoring network data.

07-Jul-2014

The GSM mobile phone system is the first civil radio network using purely digital transmission methods. In addition to the modulation mode GMSK (Gaussian Minimum Shift Keying) itself, both a time and a frequency multiplex method are used. This means for instance that the bits to be transmitted are distributed to several socalled bursts (time multiplex). These bursts are then in turn transmitted at different frequencies in the frequency hopping mode. Due to the frequency hopping mode, the timing used in GSM/PCN networks and the low phase error required for correct data transmission, stringent requirements regarding the frequency transient response are placed on the synthesizers used in the base and mobile stations. For a frequency error of <100 Hz the transient response must be within approx. 100 us to keep the residual phase error caused by the synthesizer sufficiently small. The Modulation Analyzer FMA/FMB with its high-precision AM and FM demodulators featuring DC coupling capability is particularly suitable for an uncomplicated measurement of transient responses in conjunction with an oscilloscope. Both the FMA with its low residual FM in the GSM band from 890 to 960 MHz and the FMB, which in addition also covers the PCN band from 1710 to 1880 MHz, provide in conjunction with the fast transient response of the FM demodulator the characteristics required. Highest precision regarding the transient response is provided by the FMA/FMB's special function 'IF 300 kHz'.

03-Jun-1998 | AN-No. 1EF08

Modern automotive radar systems occupy very wide bandwidth in order to have a good location resolution. In most cases the bandwidth is a result of frequency modulation or fast frequency hopping techniques, in some cases also pulse modulation is used. Besides the measurement of the frequency variation over time like deviation and linearity, the verification of emissions according to EN or FCC standards is mandatory. ETSI regulations for measuring peak transmission power from radar operating at 77-81 GHz require 50 MHz resolution bandwidth for the measurements. Publications are available that describe the measurements on pulsed UWB or MB-OFDM signals in detail, for frequency-modulated signals the information is limited.This application note provides information how to perform spectral emission measurements on frequency modulated CW signals with spectrum analyzers using RBW filters with very wide bandwidth, and explains the capabilities and the limiting factors of the Rohde & Schwarz FSW signal and spectrum analyzer to perform this measurement.

28-Jun-2019 | AN-No. 1EF107

This application note introduces the methods to convert MediaFLO™ waveform files to ARB format to be used with R&S® Broadcast Signal Generators SFx-K35 ARB Generator. R&S® IQWIZARD and WinIQSIM™ software are used, providing a quick and simple file conversion method.

10-Nov-2008 | AN-No. 7BM73

Propagation measurements are indispensable in the planning of digital, cellular mobile radio net-works. To find the optimum sites for the base stations, a mobile test transmitter system simulating the base station is operated from a number of possible locations. The test receiver system is accommodated in a vehicle, which is driven along a test route to perform measurements. The parameters measured, such as level, bit error rate or channel impulse response, provide information on the coverage within the cell. The main problem is to minimize interference caused by multipath propagation in the reception area. The SME offered by Rohde & Schwarz is a universal test generator that can be used as the core of a test transmitter system. The SME generates the GMSK-modulated signals required for GSM propagation measurements in line with the rele-vant standards. Thanks to its low weight of 17 kg it can be carried even to remote sites. Fitted with the new optional DM Memory Extension (SME-B12, in the following referred to as XMEM), the SME is able to store data sequences of up to 8 Mbit which are long enough for receiver measurements with test mobile stations. A suitable test receiver system is for instance a test mobile station for measuring level and bit error rate and the Impulse Response Analyzer PCS from Rohde & Schwarz for measuring the channel impulse response. The present Application Note describes how the XMEM can be loaded with suitable data (test sequence) by the GSM Radiocommunication Test Set CRTP from Rohde & Schwarz and how the SME has to be adjusted for GMSK modulation of these data. First, however, an overview is given of all functions of the XMEM and their operation supplementary to the Operating Manual. Finally, it is explained how the XMEM data can be transferred between PC and SME via the IEEE-488 or RS-232 interface.

01-Jul-1999 | AN-No. 1GPAN14