9015 Results
EDGE Evolution Technology Introduction
02-Apr-2008 | AN-No. 1MA129
On-wafer characterization at sub-THz frequencies
12-Dec-2023
UTRA-FDD Receiver Tests Under Fading Conditions with CMU and ABFS
25-Jun-2008 | AN-No. 1MA54
For cable TV, the "last mile" to the connection at the home is the bottleneck that prevents higher data rates. The last mile is made up of optical fiber and coaxial cables, amplifiers and electrical/optical converters. This mix of optical fiber and coaxial cables is known as a hybrid fiber coax (HFC) network. One option for cable network providers to maximize both the downstream (DS) and upstream (US) data throughput using the existing cable TV network, but without making expensive changes to the HFC network infrastructure, is to employ the data over cable service interface specification (DOCSIS) 3.1. This Application Note discusses the fundamental technological advances of DOCSIS 3.1 and presents measurement solutions from Rohde & Schwarz.
02-Mar-2015 | AN-No. 7MH89
The R&S RTO / R&S RTE digital oscilloscope is a valuable tool for analyzing EMI problems in electronic designs. High input sensitivity, high dynamic range and a powerful FFT implementation are key features for capturing and analyzing unwanted emissions
26-Feb-2015
Simplify pulse signal modeling with the R&S Pulse Sequencer software
09-May-2017
R&S®Time Code Inserter: Time Code-Based A/V Distortion Analysis
16-Apr-2013 | AN-No. 7BM84
This application note focusses on signal measurement using the R&S®RTO digital oscilloscopes ant the output of I/Q data for processing.
18-Oct-2016 | AN-No. 1MA249
Load transient response – enhancing loop stability testing
09-May-2023
PESQ<sup>®</sup> Measurement for WCDMA with R&S<sup>®</sup>CMUgo
05-Jan-2012 | AN-No. 1MA137
Integrated end-to-end data solution with IP traffic analysis and protocol statistics allows detailed analysis of data traffic generated by IoT and mobile devices.
06-Jun-2017
Frequency Response Compensation for SMx Generator Series
27-Oct-2009 | AN-No. 1MA56
Seamless Level Setting on the R&S SFU
23-Jun-2006 | AN-No. 7BM54
This application note explains how to perform LTE base station measurements over the air (OTA) using the R&S®FSH4/8/13/20 handheld spectrum analyzer.
12-Sep-2013 | AN-No. 1EF87
In this application note we explain how to test FPGA-based hardware emulators using Rohde & Schwarz vector signal generators for creating suitable real-time test signals at reduced sample rates. We further explain how to correctly adapt AWGN signal generation and fading simulation for “slow I/Q”.
10-Dec-2012 | AN-No. 1GP95
Two R&S ETL TV analyzers or two R&S ETC compact TV analyzers are used to measure the receive level of a car antenna against that of a reference antenna. The R&S BCDRIVE broadcast drive test software exports measured data for display in Google Earth.
19-Feb-2015
Millimeter-Wave Measurements Using Converters of the R&S<sup>®</sup> ZVA Family
09-Oct-2007 | AN-No. 1EZ55
Remote Emulation with the R&S<sup>®</sup>SMF100A Microwave Signal Generator
11-Oct-2016 | AN-No. 1GP92
Remote Emulation with the R&S<sup>®</sup>NRP2 Power Meter
28-Feb-2012 | AN-No. 1GP83
This application note describes how all required performance tests can be performed quickly and easily by using vector signal generators.
11-May-2016 | AN-No. 1MA162
Obtain fast data reading for realtime filter tuning with the R&S®ZNB vector network analyzer from Rohde & Schwarz.
27-Nov-2019
The R&S®SMW200A GNSS simulator offers an easy and convenient way to test your receiver design against a wide variety of potential interferers and jammers.
28-Jan-2019
How to do Measurements according to TS 34.121 in presence of the HS-DPCCH with the R&S<sup>®</sup> CMU200
25-Nov-2005 | AN-No. 1CM62
Automatic Phase Noise Measurements with Modulation Analyzer FMA (or FMAB or FMB) and Option FMA-B8
03-Jun-1998 | AN-No. 1EF15
The terrestrial television standard DVB T2 is gaining in significance as a result of the growing scarcity of available frequencies. New systems are being tested in many countries around the world. Other countries have already completed the introductory phase for DVB T2. Broadcasting transmitters are subject to particularly stringent standards with respect to broadcast signal quality, because even small faults can lead to service disruptions for many viewers or even disrupt adjacent channels.A single instrument, the R&S®ETL TV analyzer, performs all required DVB-T2 transmitter measurements, from the initial acceptance testing for the transmitter, to measurements performed during commissioning and preventive maintenance.The measurements described here satisfy many country-specific and customer-specific test specifications. Users need only set the limit values accordingly.
23-Jul-2014 | AN-No. 7BM106
Tamper protection for monitoring networks in banks
07-Jul-2014