9013 Results
Generation of Test Signals acc. ISO 14708 for Testing of Cardiac Pacemakers
15-Jul-2009 | AN-No. RCS0812-0065
The R&S®CMP200 radio communication tester together with the R&S®CM-Z300A time of flight kit provides an accurate setup for time of flight measurements – in validation, calibration and certification.
27-Jul-2022
Automated spectrum clearance in LTE and 5G mobile networks
19-Apr-2024
The R&S®SMB100A analog signal generator is the ideal calibration source for weather radar receivers due to its highly accurate output level.
25-Jan-2011
CDMA2000 1xEV-DO Packet Data Testing with R&S<sup>®</sup> CMU200
04-May-2007 | AN-No. 1CM64
Ensures compliance of high speed Ethernet cable assemblies with fast automation and easy testing.
04-Oct-2022
CMUCopy - Transferring CMU Hardcopy to PC using the IEEE Bus or the serial interface
28-Aug-2009 | AN-No. 1MA45
This application note explains how to connect and interface with the SGMA instruments and gives some recommendations and hints about their use.
15-Oct-2015 | AN-No. 1GP103
Simulation can be a big time-saver when designing EMI filters for DC/DC converters. However, simulated results can differ significantly for different tools if simulated models are not accurate or do not cover all the relevant components.
21-Sep-2021
CDMA2000<sup>®</sup> 1xRTT and 1xEV-DO Access Probe and Standby Power Measurements with the R&S<sup>®</sup> CMW500
25-May-2012 | AN-No. 1CM99
Interference hunting in TDD networks
03-Feb-2020
Reproducible Quality Analysis of Deinterlacing and Motion Portrayal for Digital TV Displays
01-Dec-2008 | AN-No. 7BM74
This application note shows how to use Rohde & Schwarz signal generators and analyzers for testing early 5G New Radio components, chipsets and devices. Methods for easy creation and analysis of custom OFDM are explained.
23-Oct-2017 | AN-No. 1MA308
Tests on CDMA2000® 1xEV-DO Access Terminals in Accordance to IS-866-A
05-Jan-2012 | AN-No. 1MA123
This application note provides basic information about frequency and phase settling time measurements and how the measurement is implemented inside modern phase noise analyzers.
28-Jun-2018 | AN-No. 1EF102
Trouble shooting problematic cases and optimization of RAN procedures are key drivers to improve the mobile network performance with R&S®ROMES4
28-Jun-2022 | AN-No. 8NT06
Using MATLAB for Remote Control and Data Capture with R&S Spectrum and Network Analyzers
24-Sep-2007 | AN-No. 1EF46
Measurements on Hearing Aids with the Audio Analyzers UPL and UPD
04-Jun-1998 | AN-No. 1GA34
WiMAX: IEEE 802.16e-2005 Introduction to OFDMA Measurements
23-May-2007 | AN-No. 1EF58
A measurement campaign quantifying the impact of intermodulation in 5G TDD networks
The performance degradation of 5G TDD networks due to network synchronization issues and varying TDD patterns in neighboring networks has been quantified.
11-Sep-2024 | AN-No. 8NT18
This application note describes how to use the generic interface in R&S®AdVISE for remote operation.
19-Jun-2020 | AN-No. 1S002
This document describes the critical parameters and provides step-by-step procedures for the configuration.
08-Dec-2015 | AN-No. 1C106
This document describes the adaptive frequency hopping mechanism for improved signaling performance in Bluetooth Basic Rate and Enhanced Data Rate devices.The R&S CMW provides this feature for remote operation in TX, Loopback and Connection test mode. Thereby the R&S CMW acts as a master, while the Equipment under Test (EUT) represents the slave(s) of the piconet.
14-Dec-2016 | AN-No. 1C108
Frequency Hopping for GSM Base Station Tests with Signal Generators SME
01-Jul-1999 | AN-No. 1GPAN28
Automated Solution with High Efficiency
This application note, introduces an example of automated testing of 5G UE PA with R&S signal generator, signal and spectrum analyzer, vector signal explorer software, power meter along with power supply.
09-Aug-2021 | AN-No. 1SL365
This application note explains battery life tests using RT-ZVC in combination with CMWrun and CMW500, including example applications.
17-Feb-2017 | AN-No. 1MA281
The IP connection security analysis solution for the R&S ® CMW500 platform identifies IP connection vulnerabilities in telematics units at an early stage of development.
18-Jul-2017