Most application notes for audio analyzer R&S® UPV include an application program which runs locally using the universal sequence controller option UPV-K1. This application note explains how sequence control programs can be modified to run on a remote PC using remote control option UPV-K4.

30-Jun-2012 | AN-No. 1GA60

This application note provides a tool for printing a report about measurement results on the audio analyzer R&S® UPV. The executable can be freely configured to include any result graphs and figures into the report. In addition it is an application example for a class library which can be included into custom application programs to add a printing function.

18-Jul-2011 | AN-No. 1GA57

This application note is about measurement accuracy of the LCR-Meters R&S®LCX100 and R&S®LCX200. On the R&S®LCX100 and R&S®LCX200, the accuracy is calculated in real time, depending on the instrument settings and on the measured impedance. It is displayed on the lower part of the instrument display. If no test instrument is available, or information about the measurement accuracy at a certain measured impedance is sought without having a DUT at hand, this accuracy calculation tool provides the desired values.The document explains the background of the calculation and the prerequisites for installing and running the program. The installer provided installs the program on your PC.

11-May-2023 | AN-No. 1GP138

This application note investigates and discusses the influence of wideband noise on harmonic distortion measurements.

06-Jul-2011 | AN-No. 1GA55

Versatile Software Tool for Rohde & Schwarz Instruments

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

24-Dec-2017 | AN-No. 1MA074

The instrument setup provided in this application note allows to analyze a degraded speech signal stored into a wave file and to display its FFT spectrum and waveform.

05-Sep-2014 | AN-No. 1GA66

The combination of R&S® CMU200 and R&S® UPV is in use for various tests of mobile phone speech functionality, such as acoustic tests according to 3GPP 26.132 or speech quality tests according to ITU-T P.862 (PESQ®) or ITU-T P.863 (POLQA®). This application note explains how to replace the R&S® CMU200 in these tasks with R&S® CMW500.

25-Jul-2014 | AN-No. 1GA65

This application note provides an application program for level alignment, test automation and reporting with PESQ, POLQA and delay measurements on the Audio Analyzer R&S®UPV or R&S®UPV66.

08-May-2013 | AN-No. 1GA62

Acoustic properties like reverberation time and early reflections are important for test rooms as well as for speech intelligibility and music performance in assembly rooms and concert halls. This application note explains the basics behind these properties and offers an application program for their measurement.

10-Jul-2012 | AN-No. 1GA61

Best practices for mobile network testing for mission-critical applications

Key Points: Mission-Critical Infrastructure: Military operations require extremely high reliability and availability, as any downtime can result in compromised missions and significant strategic losses. The reliability of communication networks is crucial to ensure seamless execution of military operations. Fundamental requirements: Military applications often require low latency and sustainable latency to ensure real-time communication and control, particularly in situations where split-second decisions can mean the difference between success and failure. This is critical for applications such as command and control systems, surveillance, and reconnaissance. Measurement Techniques: As soon as the radio access network is used, innovative testing methods are needed beforehand to proactively test the network capability and to identify any potential issues. We propose a standard test procedure for the characterization of a network regarding military use-cases that covers a representative set of different, common types of network traffic.

02-Jul-2025 | AN-No. 8NT21

SA Mode According to 3GPP 38.521-1

Device certification for compliance with 3GPP specifications is a crucial step in the launch of 5G NR user equipment (UE). As the demand for high-performance connectivity continues to rise, ensuring that devices meet industry standards is essential for delivering reliable and efficient service. To ensure optimal modem performance, RF conformance testing needs to be initiated early in the product development process. This approach enables teams to swiftly identify and address potential issues, minimizing delays and enhancing the overall quality of the final product.The R&S®CMX500 3GPP RF conformance WebGUI solution offers a fast and intuitive platform for executing NR-FR1 Standalone (SA) test cases in accordance with the 3GPP 38.521-1 specification. Its manual verification capabilities make it particularly well-suited for early-stage validation, debugging, and step-by-step verification of test cases, leveraging the comprehensive toolset provided by the R&S®CMX500 WebGUI.This application note serves as a comprehensive guide for R&D professionals, detailing the setup, configuration, execution, and verification of selected 3GPP test cases with just a few clicks in the GUI. Please note that the test steps outlined in this document require the CMX-KC661B license (SA FR1 3GPP RF Test Scenarios), in addition to the NR signaling license CMX-KS600B and the NR FR1 measurement license CMX-KM600. All descriptions, configurations and limits are based on 3GPP TS38.521-1 V18.4.0 (2024-11).

25-Jun-2025 | AN-No. 1C111

The R&S®ZNA vector network analyzer enables reliable (high-gain) receiver and low-noise block converter (LNB) characterization with a R&S®ZNA two-port unit and a simple setup.

12-Jun-2025

The R&S®ZNA vector network analyzer enables comprehensive transmit/receive module (TRM) and active electronically scanned array radar (AESA) testing with a single connection.

12-Jun-2025

Automotive radar sensors concealed in bumpers must transmit in the correct frequency domain. To hide the sensors, radar-transparent areas are usually painted the same as the rest of the vehicle. You need to know bumper material propertiers when selecting paint and coatings. In the past, quasi-optical or waveguide based setups with vector network analyzers (VNA) were used. This application card describes a simplified material characterization method in the automotive radar frequency domain (76 GHz to 81 GHz) using the R&S®QAR50 automotive radome tester.

11-Jun-2025

Compliance and Pre-compliance testing are very important topics during the development of any Wireless DeviceIn this document the differences between Conformance testing vs. Pre-conformance tests will be explored as well as the Rohde & Schwarz offerings to conduct these tests

05-Jun-2025 | AN-No. 1C110

The purpose of this document is to provide a step-by-step guidance on how to perform VESA compliance testing on DisplayPort 80 cable assembly.Throughout this Method of Implementation (MOI), procedures will detail how to perform such VESA compliance testing using the R&S® ZNB lineup of Network Analyzers.

19-May-2025 | AN-No. 1SL414

The purpose of this document is to provide a step-by-step guidance on how to perform VESA compliance testing on DisplayPort 54 cable assembly.Throughout this Method of Implementation (MOI), procedures will detail how to perform such VESA compliance testing using the R&S® ZNB lineup of Network Analyzers.

19-May-2025 | AN-No. 1SL413

The purpose of this document is to provide a step-by-step guidance on how to perform VESA compliance testing on DisplayPort 8k cable assembly.Throughout this Method of Implementation (MOI), procedures will detail how to perform such VESA compliance testing using the R&S® ZNB lineup of Network Analyzers.

19-May-2025 | AN-No. 1SL412

New function for R&S®M3SR Series4400 radios

16-May-2025

The R&S®FSWP phase noise analyzer and VCO tester is a high-end instrument that accurately analyzes noise in key radar and communications system components. Phase noise measurements are used to derive the large-signal noise figure for a device under real-world operating conditions.

16-May-2025

Comprehensive test and validation of network slicing in 5G devices with dynamic resource allocation thanks to the CMX500 radio communication tester.

08-May-2025

R&S®RadEsT – electronic corner reflector

08-Apr-2025

R&S®RadEsT – radar multimeter

07-Apr-2025

Powerful tool for Rohde & Schwarz vector network analyzers (VNA) to simplify automated setup for complex measurements in R&D, verification and production labs

24-Mar-2025

Reverberation Chambers (RVC) have become popular as an alternative to Anechoic Chamber (AC) facilities for electromagnetic emission & immunity tests. Unlike AC, RVC reflects waves creating multipath environment. EMC testing using reverberation chamber is accepted in various EMC test standards across different industries. The RVC is cost effective allowing high field strength generation without excessive amplification needs, eliminates the need for complex positioning of antennas and DUTs increasing test speed and simulates real-world electromagnetic environments more accurately. To ensure accurate and efficient testing, specialized EMC test software is required for data acquisition, automation, and analysis. This application note describes how to setup Elektra and perform measurements in RVC.

20-Mar-2025 | AN-No. 1EE28

In the fast-paced world of automotive manufacturing, ensuring reliability and precision in radar sensors is paramount. Rohde & Schwarz provides advanced production testing solutions for automotive radar sensors and empowers tier 1 suppliers to deliver exceptional performance, safety and efficiency.

13-Mar-2025

Testing RF devices, like power amplifiers, requires a certain input power at the device under test (DUT). Sometimes, more power than a signal generator can deliver is needed. This may be the case when devices require higher input power, or when they need to be connected using long cables, which introduce large insertion losses at high frequencies. In these cases, an external amplifier can be used to deliver the required power to a DUT.This application note gives a guideline how to increase the power delivered to a DUT by an R&S®SMW200A vector signal generator using an external amplifier.It covers shifting the power reference plane from the generator output to the DUT input using an R&S®NRP power sensor and mitigating linear and nonlinear distortions using an R&S®FSW signal and spectrum analyzer.

12-Mar-2025 | AN-No. 1GP143

The shift from internal combustion engine (ICE) automobiles to electric vehicles (EV) has come with an array of new subsystems and components that introduce new EMC considerations. The level of complexity involved in automotive EMC testing increases with dynamic driving conditions where manufacturers not only have to refer to the framework standards offered, but must also improvise and establish new internal standards to ensure the vehicle and its internal components all function properly under all driving conditions. A number of challenges may arise when building a suitable test bench that thoroughly tests EVs and electrical components. This educational note dives into the development of dynamic EMC test systems, their inherent challenges, and how Rohde & Schwarz and AVL, one of the world’s leading mobility technology companies for development, simulation and testing in the automotive industry, have teamed up to provide a unified EMC test platform for dynamic driving conditions.

11-Mar-2025

The CMW500 wideband radio communication tester and the CMX500 radio communication tester are ideal for testing smartphones and tablets to meet EU energy efficiency index standards.

28-Feb-2025

The R&S®ZVA-Zxxx and R&S®ZCxxx mmWave converters extend the R&S®ZNA vector network analyzer frequency range up to 1.1 THz.

27-Feb-2025