Automated testing against the Chinese national GNSS test standard (GB/T 45086.1‑2024) with R&S®CMWrun sequencer software and the R&S®SMBV100B vector signal generator

20-Feb-2025

conducted conformance testing according to TS 38.141-1, Rel. 16

3GPP defines the Radio Frequency (RF) conformance test methods and requirements for 5G NR Base Stations (BS) in the technical specifications TS 38.141. This application note describes how all mandatory RF performance tests (TS 38.141-1, chapter 8), according to Release 16, can be performed quickly and conveniently with signal generators from Rohde & Schwarz by either choosing manual operation or a remote control approach.In Addition, a new Python software library comes with this application note to enable the remote control approach of base station testing. This example requires the RsInstrument module which can be found on pypi.org or installed via 'pip' and is provided as is.

24-Oct-2019 | AN-No. GFM315

Using option ZVR-B4 (Frequency Converting Measurements), a ZVR Vector Network Analyzer can be used for measurements on frequency converting devices such as mixers and amplifiers. Using the ZVR's ARBITRARY mode, the source and receiver frequency ranges of the ZVR's generator and receiver, plus for two external signal generators, can be defined independently. As a result, mixer and intermodulation products such as conversion loss or sampling mixers, can all be measured. Used together with option ZVR-B6 (Reference Channel Ports), group delay measurements can also be made on frequency converting devices.

19-Jan-1999 | AN-No. 1EZ47

Spectrum scans are beneficial for many use-cases such as troubleshooting, interference detection and interference hunting, or verification tasks like scheduler verification or other engineering tasks. A time-gated spectrum scan, which is a power spectrum scan which applies a time gate on uplink/downlink slots/symbols and/or the guard period reveals even more details in uplink/downlink or guard period power spectrum. This allows to focus on the uplink / downlink or guard period power spectrum in 5G NR TDD networks. This educational note explains use cases for spectrum measurements, the complexity in 5G TDD and its technology basics, and which problems can be solved with the described solution. The software used is R&S®ROMES4 together with a R&S®TSMx6 drive and walk test scanner.

21-Sep-2023 | AN-No. 8NT08

10BASE-T1S Ethernet enables the integration of diverse sensors into an automotive-Ethernet vehicle supply system, for example short-range radar sensors for detecting blind spots or ultrasonic sensors for the parking assistant. For reliable operation of the functions, data transmission over 10BASE‑T1S Ethernet must be assured at all times and in every climatic environment. Functionality must be tested during development and in production. Only 10BASE-T1S Ethernet interfaces that have passed compliance testing in line with IEEE 802.3cg can be deployed in vehicles. Consequently, vehicle manufacturers and their suppliers need measuring equipment that allows them to perform these tests quickly and reliably.

15-May-2020

PAM-4 (4-level pulse amplitude modulation) has been introduced in high-speed serial data technology to reduce the bandwidth demands of ultra-high data rates. It uses only half the bandwidth per bit that would be required of conventional NRZ (non-return to zero) modulation. But at the same time, PAM-4 signaling complicates design and test at every turn. Evaluation of channels is now just as important to system development as serializer / deserializer (SerDes) testing and the challenges presented require a higher level of test and measurement performance than ever before. This paper investigates the evaluation complexities of PAM-4 interconnects at high data rates.

22-Oct-2020 | AN-No. GFM355

This application note describes how the most important fading tests for mobile phonesin all GSM frequency bands can be carried out cost-effectively using a combination of a CRTP/C02 Radiocommunication Tester and SMIQ Signal Generator.

23-May-2000 | AN-No. 1MA19

Using VISA (Virtual Instrument Software Architecture) several interfaces allow communication between your computer and instruments. This application note describes the usage of both - R&S® VISA- NI VISA running on Microsoft Windows 10™ with the following connection types: ► USB VCP (Virtual Com Port), also called USB CDC (Communications Device Class) ► USB TMC (Test and Measurement Class)► Ethernet Raw Port Socket► Ethernet in general e.g. VXI11 or HislipAll the examples are shown using the R&S® HMC8042 unless otherwise stated. There may be some difference when integrating other devices. As example some interface types are not available on every unit.This application note does not claim to be complete. All information has been compiled with care. However, errors can’t be ruled out.

28-Oct-2021 | AN-No. 1SL374

eCall is deployed in Europe and is required by law in new cars as of March 2018. Next generation eCall (NG eCall) is built on LTE and 5G.

06-Jun-2018

Power Added Efficiency (PAE) is a key parameter for the characterization of an amplifier.This application notes introduces two alternative methods how to do the Power Added Efficiency measurement. The first one is based on the R&S ZNB vector network analyzer (VNA) measurement function. Alternatively to this, the PAE tracer macro is introduced. This macro offers to make the PAE at an user selected compression point of the amplifier versus frequency. The PAE tracer macro is provided together with this application note.

22-May-2013 | AN-No. 1EZ64

The R&S®CMP200 radio communication tester together with the R&S®CM-Z300A time of flight kit provides an accurate setup for time of flight measurements – in validation, calibration and certification.

27-Jul-2022

This application Note is based on CMW500, SMBV100B and Vector CANoe.Car2x Software and guides to how to simulate the specific Cellular Vehicle-to-Everything (C-V2X) wireless environment in respect to road transport scenarios and transmitted messages around the Device Under Test (DUT) like a Telematics Control Unit (TCU). It shows how to verify and validate the C-V2X application of the DUT in laboratory environment. The virtual simulation scenario is not limited to the requirements of CSAE53-2017 specification, and it could be modified by user according to this operating guide with CANoe.Vehicle-to-everything (V2X) is a new generation of information and communications technologies that connect vehicles to everything. The objective of V2X is to increase road safety and manage traffic efficiently.C-V2X is designed to offer low-latency vehicle-to-vehicle (V2V), vehicle-to-roadside infrastructure (V2I) and vehicle-to-pedestrian (V2P) communications services to add a new dimension to future advanced driver assistance systems (ADAS). C-V2X as one communications standard defined by 3GPP in Release 14 uses LTE technology as the physical interface for communications. The standard describes two types of communications. The vehicle-to-network (V2N) communications type, exploits the cellular Uu interface, uses traditional cellular link to enable cloud services to be integrated into end-to-end solutions, e.g. to allow road and traffic information for a given area to be distributed to the vehicles.The second type is referred to as direct or PC5/Sidelink (V2V, V2I, V2P) communications, where data transmission takes place over the PC5 interface. In that type, C-V2X does not necessarily require a cellular network infrastructure. It can operate without a SIM and without network assistance and uses GNSS as its primary source for time synchronization.Verifying system functionality and performance exclusively by field testing in a real-world environment can be time-consuming, costly and very challenging. Requirements regarding functionality, and consequently the required assistance functions, are constantly changing. Due to this fact, test solutions are needed during the development and introduction phase to verify compliance with the standards. The PC5 direct communications type allows exchange of time sensitive and safety relevant information. Using a mobile communication tester like the R&S® CMW500 together with a C-V2X scenario simulation tool delivers reproducible test scenarios. This is essential for the standardization of verification processes for C-V2X in order to obtain reliable and comparable results, and it helps to demonstrate that end-to-end functionality between two C-V2X devices from different vendors works properly.

02-Jun-2021 | AN-No. GFM341

Frequency allocation plans are under discussion in the US and Europe to open the lower C band for 5G applications. This portion of the spectrum provides 5G with more bandwidth than conventional lower mobile frequency bands and is contiguous while the C band is actually in use for satellite downlinks to satellite earth stations (SES).

18-Mar-2019

This Application Note provides an overview of the Bit Error Rate (BER) test capabilities of the Universal Radiocommunication Tester CMU300 on GSM / EDGE Base Stations. It includes information about measurement principles, the supported test environment and channels, CMU settings, operation, and ordering information.

15-Jan-2002 | AN-No. 1CM32

High Speed Downlink Packet Access (HSDPA) and High Speed Uplink Packet Access (HSUPA) optimize UMTS for packet data services in the downlink and uplink, respectively. Together, they are referred to as High Speed Packet Access (HSPA). Within 3GPP Release 7, 8, 9 and 10, further improvements to HSPA have been specified in the context of HSPA+ or HSPA evolution. This Application Note describes how HSPA+ features can be tested using Rohde & Schwarz instruments.

26-Apr-2013 | AN-No. 1MA121

This Application tests whether a multi-mode mobile phone supporting both GSM and IS136 has registered onto a GSM network, or an 136 network. The test set-up requires a CRTx to provide the GSM BCCH carrier, and a CMU200 to provide the IS136 DCCH carrier.

07-Mar-2003 | AN-No. 1CM31

A lack of lip synchronicity is an effect that can severely impair the quality of TV reception. With modern digital signal processing, this audio-to-video delay occurs much more often than in earlier times when analog signal generation was used. The total delay can reach several hundred milliseconds, which is immediately noticeable on a TV home receiver. To prevent such impair-ments, the audio-to-video delay must be measured.

27-Aug-2002 | AN-No. 7BM44

Emergency Road Assistance (ERA-GLONASS) is a service provided in the Russian Federation with thegoal of reducing response times for accidents or other emergencies on the roadways. This application note briefly describes the technology behind ERA-GLONASS and presents conformance tests for ERAGLONASS using the R&S®CMW500 RF tester and the R&S®SMBV100A vector signal generator. A Test software for ERA-GLONASS makes it quick and easy to perform these tests with the GSM or WCDMA wireless communications standard. It also shows a test solution for GNSS performance tests for ERAGLONASS using the R&S®SMBV100A vector signal generator and the option R&S®SMBV-K360 together with CMWrun.

24-Jan-2018 | AN-No. 1MA251

Spectrum clearance in mobile networks is becoming ever more important as operators use new bands that previously contained other services. This is particularly important for the 5G NR rollout. 5G NR has already initiated a worldwide deployment of TDD networks in an unknown radio environment where unwanted transmitters can create uplink interference masked by downlink signals, making interference hunting particularly demanding. Automated detection of interference signals before a network switches on can be a big help in addition to traditional manual techniques.

19-Apr-2024

The Rohde & Schwarz R&S®CMU200 can be configured to perform packet data testing in a Mobile IP or Simple IP environment. This application note is intended as a guide to configuring the necessary Mobile IP or Simple IP network elements and R&S®CMU200 instrument for CDMA2000 1xEV-DO.

04-May-2007 | AN-No. 1CM64

This application note is step by step guide on 5G New Radio (5G NR) signal generation and analysis capabilities using the R&S®SMW200A Vector Signal Generator equipped with software option SMW-K144 (5G NR option), in combination with the R&S®FSW Signal and Spectrum Analyzer and the software options FSW-K144 & FSW-K145 (5G NR Downlink & Uplink Signal Analysis). The R&S®VSE Vector signal explorer has also been used for analysis purpose in parallel to the FSW-K144 & FSW-K145 software options.It is assumed that the reader already has a deep understanding of the 5G New Radio standard as well as the testing aspects. If not, then please refer to the 5G eBook more a detailed overview on the fundamentals, procedures, testing aspects of the 5G NR technology.

22-Nov-2019 | AN-No. GFM322

Simulation can be a big time-saver when designing EMI filters for DC/DC converters. Power supply control chip vendors offer various filter design tools that provide reasonable design choices for filter simulation before any hardware prototype is available. However, simulated results can differ significantly for different tools if simulated models are not accurate or do not cover all the relevant components. Performing a hardware measurement to evaluate the effectiveness of a simulated EMI filter is therefore indispensable.

21-Sep-2021

Two test setups which demonstrate the Bit Error Rate (BER) test function of either an SMIQ (with option B21) or an AMIQ (with option B1) are described. The tester generates the FSK modulated RF or IF signal as well as carries out the BER test. The analog Marker FM Demodulator from an FSP/FSU spectrum analyzer is used as an online FSK demodulator.

06-May-2002 | AN-No. 1MA57

The R&S®SFU broadcast test system is used as a reference signal generator to simulate the influence of LTE and other mobile radio signals on digital TV signals and receivers.

20-Jun-2012

In modern telephoning, dual-tone dialling is used more and more often. Every symbol to be transmitted is coded by two frequencies which are sent at the same time. To ensure a trouble-free call setup, transmission has to be done within defined tolerances. For measuring these kind of dialling signals, the measurement equipment has to fulfill high requirements. This application note describes how the measurements can be carried out by using the Audio Analyzers UPL or UPD. It also presents a measuring program for this application.

04-Jun-1998 | AN-No. 1GA23

Verifying 5G transmitted signals in the field with the R&S®Spectrum Rider FPH handheld spectrum analyzer

30-Jul-2024

This application card examines the best practices for testing video service quality over mobile networks and discusses the different types of video services and recent changes in video streaming.

18-Apr-2024

Phase difference is the key parameter when characterizing direction finding (DF) scenarios. To analyze DF equipment, the phase difference needs to be determined before measuring other parameters such as the bearing. The R&S®VSE-K6A multichannel pulse analysis software in combination with a Rohde & Schwarz oscilloscope provides phase difference measurements even in challenging environments, utilizing the test equipment’s advanced trigger capabilities.

02-Mar-2021

The specialized R&S®MULTI-MOTION test sequences offered by the R&S®DVSG Digital Video Signal Generator permit a reproducible quality analysis of deinterlacing and motion portrayal for digital television (TV) displays. This makes it possible to study all potential degradations resulting from the progressive conversion separately. It also allows the various motion artefacts resulting from liquid crystal (LCD), plasma (PDP), and digital micromirror (DMD) technologies to be quantified. This application note explains how to draw specific conclusions from the sequence output on the test display.

01-Dec-2008 | AN-No. 7BM74

The Bluetooth® wireless standard has been an unparalleled success. It has found its way into virtually all smartphones, PCs, cars, entertainment hardware and wearables. Bluetooth SIG reports that more than 8 billion devices are currently in use. Bluetooth supports Internet of Things (IoT) technologies and direction finding methods, making it a sure bet for the future as well.This white paper summarizes the various Bluetooth technologies with a focus on the physical layer in line with core specification version 5.1.

05-Jun-2019 | AN-No. 1MA108