9087 Results
Remote Emulation with the R&S SMBV100B Signal Generator
30-Sep-2019 | AN-No. 1GP121
RF system noise contributions define receiver capabilities and sensitivity. The noise figure measures how the critical components affect the signal.
28-Jan-2022
Double frequency range for R&S Signal Generators
20-Apr-1998 | AN-No. 1GPAN03
This document describes WLAN tests which rely on communication (signaling) between R&S CMW and device under test (DUT) and on transmission of packet data over WLAN. On the R&S CMW side the WLAN Signaling application is required, for some tests also the Data Application Unit (DAU). The test principles and the necessary settings are explained and background infor-mation is given. Step-by-step procedures are provided for the main configuration tasks.
08-Feb-2016 | AN-No. 1C107
Generation and Analysis of ZigBee™ IEEE802.15.4 signals in the 2.4 GHz band
21-Jun-2007 | AN-No. RSI03
The topic of this application note is mobile phone measurements – in theory and in practice. It discusses measurements according to the most common standard in use today, GSM.
22-Aug-2014 | AN-No. 1MA231
The R&S®Pulse Sequencer software together with the R&S®SMW200A vector signal generator offers a simple and easy way to simulate multi-emitter environments.
13-Nov-2018
Rohde & Schwarz Drivers under VEE - Installation and Troubleshooting
20-Dec-2012 | AN-No. 1MA035
Multichannel signal reception in parallel using digital downconverters in a monitoring receiver.
14-May-2014
Welcome to this introductory video show about the R&S ZVA family of network analyzers.
13-Feb-2014 | AN-No. 1MA50
High-speed serial interfaces often transmit data with differential signaling and differential probes can be used to access signal traces. In addition to differential inputs, these probes have a ground connection.
02-Nov-2022
Testing radar warning equipment in realistic scenarios is crucial to reliable field performance. Commercial vector signal generators (VSG) such as the R&S®SMW200A from Rohde & Schwarz have become a very attractive alternative thanks to their increased available bandwidth and processing power.
13-Aug-2020
This application note explains how to setup R&S®AdVISE to monitor the temperature of an EUT by using an infrared camera.
14-Sep-2020 | AN-No. 1S008
In this paper we will review the basics of spurious measurements and how the parameters used can affect the detection performance.
14-Jul-2017 | AN-No. 1EF97
Verifying RF ports is crucial for minimizing lost power and maximizing battery life. The R&S®FPC1500 is an easy-to-use and costeffective tool for this type of verification.
05-Mar-2020
For measurement settings below 10 mV/div, oscilloscopes typically reduce the measurement bandwidth in order to keep the trace noise as low as possible. The R&S®RTO is different: It offers the full bandwidth even for the most sensitive settings, and an A/D converter with more than 7 effective bits (ENOB) digitizes the signal.
13-Jul-2012
Remote Emulation with the R&S<sup>®</sup>SMA100A Signal Generator
17-Aug-2015 | AN-No. 1GP93
Measurements on PCS1900 Mobile Stations According to J-STD-007
01-Nov-1996 | AN-No. 1EF22
In this application note the fundamental working principles of active antennas and the differences compared to passive antennas are asserted.
03-Feb-2016 | AN-No. 8GE02
The R&S®SMBV100B delivers precise synchronization information for communications in C-V2X mode and very accurate position information to the device under test.
18-Nov-2019
The R&S®RTx-K50 option expands the addressable range of interface standards by adding decoding capability for standardized and proprietary Manchester or NRZ coded buses.
19-Oct-2020
The R&S®SMB100A analog signal generator is the ideal calibration source for weather radar receivers due to its highly accurate output level.
25-Jan-2011
CDMA2000 1xEV-DO Packet Data Testing with R&S<sup>®</sup> CMU200
04-May-2007 | AN-No. 1CM64
Active, high-impedance probes can be connected to spectrum analyzers, providing a practical and highly precise measurement solution to overcome an otherwise cumbersome RF testing issue. This application note provides information on how to use oscilloscope probes in RF measurements using spectrum analyzers
04-Jul-2023 | AN-No. 1EF116
R&S CMWrun - RF preconformance testing solution
20-Feb-2015
CMUCopy - Transferring CMU Hardcopy to PC using the IEEE Bus or the serial interface
28-Aug-2009 | AN-No. 1MA45
This application note describes Methods of Implementations (MOI) for precise, fast and error-free compliance testing of high-speed backplanes and direct attach copper cables (DAC).
07-Apr-2021 | AN-No. GFM356
Simulation can be a big time-saver when designing EMI filters for DC/DC converters. However, simulated results can differ significantly for different tools if simulated models are not accurate or do not cover all the relevant components.
21-Sep-2021
This application note explains how to generate phase coherent signals with a compact easy-to-use solution.
07-Sep-2016 | AN-No. 1GP108
This application note explains how to connect and interface with the SGMA instruments and gives some recommendations and hints about their use.
15-Oct-2015 | AN-No. 1GP103