Key facts
The R&S®NRQ6 combines the accuracy of a power meter with excellent dynamic range
The R&S®NRQ6 is based on receiver technology and can perform band-limited power measurements down to -130 dBm. The R&S®NRQ6 combines high-precision with high-speed measurements beyond the limits of currently available power meters. In addition to conventional continuous average measurements, the R&S®NRQ6 has a trace display function and also performs ACLR measurements. The optional R&S®NRQ6-K1 I/Q data interface, R&S®NRQ6-K2 power servoing and R&S®NRQ6-K3 phase coherent measurements options complete the R&S®NRQ6 as new category of test and measurment devices.
Precise and fast with receiver based architecture
R&S®NRQ6 trace measurement on a pulsed signal
Maximum performance in minimum form factor
Signal check for a 20 MHz LTE signal
The R&S®NRQ6 as a standalone RF frontend
The R&S®NRQ6 can be used as a standalone RF frontend to capture vector-modulated I/Q signals. With the optional R&S®NRQ6-K1 I/Q data interface, captured I/Q data can be read out using SCPI commands. The data is demodulated and analyzed using external software, e.g. R&S®VSE. With the R&S®NRQ6 version 2.10 and the R&S®VSE version 1.70, direct data aquisition and control is possible.
5G NR measurement with R&S®NRQ6 and R&S®VSE
In component test applications non-linear characteristics of DUT´s make it difficult to set up a specific output power. The R&S®NRQ6-K2 power servoing option enables a dedicated serial communications channel over the trigger connectors between R&S®NRQ6 and R&S®SGT100A. The desired power will be set in several iterations and is finished typically in 1 ms to 1.5 ms.
Power servoing with R&S®NRQ6 and R&S®SGT100A
In the power servoing setup the R&S®NRQ6 can perform also power measurements without disconnecting, just by remote control commands.
Calibration of multiple active antenna modules for beamforming
The synchronous phase coherent measurements (option R&S®NRQ6-K3) are based on a primary/secondary relationship between two or more R&S NRQ6. The primary forwards the local oscillator signal (LO) and its clock signal (CLK) to the secondary(ies) and triggers the secondary(ies). The RF phases can be measured at up to 8 ports, where the typical uncertainty is only 0.1 degree at an power of -60 dBm.
R&S®NRQ6 multichannel phase difference measurement
Results of a measurement with one R&S®NRQ6 as primary (only used for distribution of TRG, CLK and LO signals) and eight R&S®NRQ6 as secondaries.
Beyond limits of conventional diode power sensors
Every diode based power meter works without band limitation in the specified frequency range. Precise measurement of low-power signals requires averaging of multiple measurement samples and this increases the measurement time. The diode based power meter technology is mature, and therefore only limited product innovations are possible. The receiver technology based R&S®NRQ6 has significantly increased the measurement speed for low-power signals.
Measurement time comparison for a CW signal
With the R&S®NRQ6 the measurement time is reduced e.g. by a factor of ca. 20.000 in comparison to the NRP8S for a -50 dBm CW signal.
Related products
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found
Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes
1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).
2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.
3. Participation is free of charge and not dependent on the purchase of goods or services.
4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.
5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:
Prize: 1x R&S®RTB2000 Digital Oscilloscope
6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.
7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.
8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.
9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.
10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.
11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.
12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.
13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.
* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.
