Rohde & Schwarz at MWC 2019 – Videos

5G as a full system provider (Solution for regulatory authorities)

At MWC 2025, we showcased our enhanced 5G monitoring and testing portfolio. Rohde and Schwarz is the first full system provider for license compliance, interference hunting and coverage measurements for 5G mobile networks

AI-powered network visibility

Discover AI-powered deep packet inspection in action! How does AI-driven encrypted traffic intelligence (ETI) enhance transparency in large-scale telecom networks? Watch Anna Vilshöfer break it down and see how our next-gen DPI is shaping intelligent networks

Time Domain Analysis for ESMW

The ESMW ultra wideband monitoring receiver is the core component of our future-proof spectrum monitoring systems for fixed, mobile and transportable stations. Here, at MWC2025, we are launching the much expected time domain analysis functionality for the ESMW with gated measurements, which is crucial for license compliance and interference hunting in 5G networks.

Customized 5G signals for FR3 and NTN testing

Learn about typical production measuerments for FR1 base station and small cell testing.

FR3 device testing

Discover the feasibility of FR3 using the CMX500 OBT in a maximum throughput use case at a 13GHz based on Qualcomm Technologies’ 5G mobile test platform.

Physical layer testing for base stations

Learn about typical production measuerments for FR1 base station and small cell testing.

ML-based CSI-RS feedback enhancements

This demo showcases an industry-first implementation of ML-based CSI-RS feedback, achieved in partnership with Qualcomm Technologies.

Network energy saving testing

In this demo, Rohde & Schwarz and VIAVI Solutions in collaboration with Analog Devices are showcasing how advanced energy saving features on an O-RU platform save energy under real-world traffic loads.

AR antenna measurements

This demo showcases AR in the context of OTA testing by visualizing an antenna pattern over a DUT inside the R&S®ATS800R chamber, enabling control of a positioner via hand gestures.

NR-NTN conformance testing

This demo showcases first 5G test cases in FR1 where the CMX500 one-box-tester (OBT) is connected to the DUT to simulate specified test scenarios integrating base stations and satellites.

AI-powered scripting

Discover how our AI-based scripting assistant on the CMX500 one-box signaling tester revolutionizes mobile phone testing in this demo.

Towards 6G: Digital Twins for AI-RAN

In this demo, we collaborated with NVIDIA to showcase how ray tracing can be utilized to create realistic radio propagation environment conditions and how to transfer the generated wireless channel data for reproduction in lab testing.

NR-NTN testing - connectivity redefined

Discover our new tool Constellation Insight, which, when paired with the CMX500 one-box tester, simplifies the configuration and deployment of non-terrestrial networks.

Network benchmarking techniques – behind the scenes

The presentation explores the complexities of benchmarking campaigns, from test design to automation in dynamic networks.

First responders' lifeline: How to verify and optimize MCX network performance

The presentation highlights MCX performance testing using Rohde & Schwarz's methods to ensure safe broadband migration and protect first responders by identifying network issues early.

Achieving the first conformance certification for the Frequentis MCX Client Platform

This presentation highlights Frequentis's milestone as the first to achieve MCX Client Platform certification.

GCF MCX Certification – a key step in enabling end to end mission critical services over mobile broadband

The talk highlights MCX standards, certification, and measures to ensure reliable Mobile Broadband for public safety.

NTN developments at ESA

This session highlights how to support developments, experimentation and further standardisation of the satellite component in 3GPP.

Pioneering 4G/5G connectivity from space: Opportunities, challenges & solutions

The presentation discusses leveraging satellite technology to enable 4G/5G connectivity, addressing opportunities, challenges, and innovative solutions.

A network operator’s view on current NTN possibilities and areas for future research

The talk highlights the integration of satellite and terrestrial networks, enabling initial services while requiring further research.

Demystifying lab testing of NR-NTN devices

The talk highlights the integration of satellite and terrestrial networks, enabling initial services while requiring further research.

NES in 3GPP – a technology overview

This talk covers 5G Advanced Network Energy Savings (NES) progress, challenges, and future evolution in 3GPP standards.

Integrated sensing and communication (ISAC) from 5G-advanced to 6G

This presentation covers the status of ISAC in 6G, 3GPP Release 19 developments, and Rohde & Schwarz test solutions.

Energy efficiency in telco networks

This talk addresses the energy consumption trends of telecommunication networks in Germany, highlighting the increasing role of wireless technologies, the need for a life-cycle assessment of emissions, and more.

RAN energy efficiency journey

The presentation will guide the audience on a journey into the different dimensions through which energy efficiency can be achieved in a radio access network.

Self-powered wireless sensors for the IoT

The presentation explores self-powered wireless IoT sensors using energy harvesting, highlighting implementations, performance, and use cases for optimized industrial processes.

RF wireless power transfer testing

The presentation explores RF WPT for IoT devices, highlighting efficiency gains via waveform shaping and AirFuel Alliance standards.

Business critical Campus Networks, the operator perspective

This talk explores the role of 5G Campus Networks in accelerating digitalization through tailored architectures and advanced monitoring solutions to meet business-critical application demands and stringent SLA requirements.

Essential performance learnings from private and public 5G networks

This talk addresses synchronizing private and public networks, optimizing coexistence, and troubleshooting with advanced layer 1-3 insights.

Benefits of private 5G networks in industry – case study steel manufacturing

The case study shows the advantages of private 5G networks for a customer in steel manufacturing and is the foundation for digital transformation.

Navigating the 5G evolution by connecting industrial IoT with Modern Supply Chain

This talk is a demonstration of how private 5G is building the connectivity bridge, between Modern Supply Chain requirements and the real-time industrial IoT applications to feed those.

NB-NTN module application from module supplier perspective (IoT/Automotive)

This talk is about Murata showcases advancements in NB-NTN modules and future wireless connectivity, exploring applications and trends in licensed and unlicensed bands.

The future of wireless with 6G

This talk explores 6G advancements, including AI, 3D networking, RIS, XR, security, and research shaping future deployment.

Radio protocol emergence

This talk explores the potential for accelerating and optimizing the traditional RAN protocol standardization process using an ML-based framework that enables independent radio nodes to autonomously develop performance-driven communication protocols.

Cellular IoT evolution from 2G to 6G

This talk highlights the 2G-5G transition and key cellular IoT technologies with challenges and recommendations.

The elephant in the room called Wi-Fi

This presentation explores the need for seamless Wi-Fi and 5G interworking, covering approaches like Hotspot 2.0, AT3S, and related testing and certification.

5G network benchmark beyond the numbers

This presentation examines 5G performance beyond benchmarks, focusing on indoor propagation and altitude impacts on coverage, capacity, and user experience.

MTSK2024 - 6G research areas from T&M perspective

6G research areas from T&M perspective

MTSK2024 - 6G forum view on IMT-2030 Use Cases

6G forum view on IMT-2030 Use Cases

MTSK2024 - Wi-Fi technologies and solution

Wi-Fi technologies and solution

MTSK2024 - NTN Architectures and technologies

NTN Architectures and technologies

MTSK2024 - Mobile Test Summit Korea 2024 Welcome & Opening

Mobile Test Summit Korea 2024 Welcome & Opening

Impressions - MNT Forum 2023

Impressions from Mobile Network Testing Forum 2023 at the Rohde & Schwarz headquarter in Munich.

Air Space World 2023 Customer Voice Skyguide

Conformance test for O-RAN fronthaul from Rohde & Schwarz, VIAVI Solutions, and Analog Devices

Watch a demonstration of O-RAN radio unit conformance test. Using a test setup from Rohde & Schwarz and VIAVI Solutions run tests conforming to O-RAN ALLIANCE specifications on an Analog Devices 8T8R radio reference platform.

Network engineering and troubleshooting

With this demo we present our MNT solutions for UE and network engineering, troubleshooting and Open RAN testing.

Ultra wideband performance testing over the air for R&D

Watch our experts at MWC 2023 to learn about fully automated test solutions that help to quickly test and compare various device designs in order to achieve the most accurate UWB localization.

Towards 6G: AI/ML-based neural receiver

The wireless industry anticipates that a future 6G standard supports an Artificial Intelligence / Machine Learning (AI/ML) based air interface natively.The wireless industry anticipates that a future 6G standard supports an Artificial Intelligence / Machine Learning (AI/ML) based air interface natively. In this joint demonstration, Rohde & Schwarz and Nvidia demonstrate a neural receiver approach, using a trained machine learning model for signal processing tasks such as channel estimation, channel equalization, and demapping. Due to the lack of a 6G standard, we showcase a 5G NR PUSCH multi-user MIMO scenario, emulating two users with 2x2 MIMO, that are independently faded to simulate realistic channel conditions using the R&S SMW200A vector signal generator. The signal is captured using the MSR4 satellite receiver and transferred to a server. Our server-based testing (SBT) framework, including vector signal explorer (VSE) microservices is used to pre-process the data. The generated post-FFT data is input to

Testing 6G JCAS in FR2 frequency bands

The demo includes R&S signal generators and signal and spectrum analyzers to demonstrate and visualize cutting edge JCAS test capabilities by Rohde & Schwarz.

Test Wi-Fi 7 (IEEE 802.11be) 4x4 true-MIMO

Rohde & Schwarz présente les mesures Wi-Fi 7 (IEEE 802.11be) 4x4 true MIMO jusqu'à la bande passante 320 MHz et jusqu'à la bande de fréquence 6 GHz en se basant sur le système R&S CMP180 CMPflexx en utilisant un routeur Wi-Fi 7 comme dispositif sous test (DUT).

Mobile Network Testing in Private networks

The pre-condition, to reach the expected Service Level of Quality is a good network deployment in an interferer free area. Measuring, troubleshooting and verifying the network availability, throughput and latencies is the key, ensuring full functionality for mission critical use-cases in all kind of private networks or in a B2B environment

Identification par indicateur sécurisé

Découvrez-en plus à propos des radiogoniomètres ATC dédiés à la prise de connaissance situationnelle et à l'identification par indicateur sécurisé de Rohde & Schwarz.

Strong security for critical infrastructure

Find out more about IP networks of ANSP infrastucture and network encryption for air traffic control.

Lifecycle support through service level agreements

Find out more about long-term availability and operational readiness with CERTIUM SERVICE from Rohde & Schwarz.

Network integration flexibility

Find out more about flexible network integration from ATC software defined radios from Rohde & Schwarz.

LDACS paves the way to ATM digitalization

Find out more about LDACS (L-band Digital Aeronautical Communications System), the new air-to-ground communications standard.

High availability 5kW HF high-power transmitters

Find out more about 5 kW HF transmitter from Rohde & Schwarz provides improved quality and high availability.

Advanced voice quality assurance system

Find out more about insightful analytics and detailed monitoring of ATC voice networks.

Application video: Accelerating ADAS-AD with Hardware-in-the-Loop Testing

Solution de test radar dans la bande de haute précision

Découvrez les solutions de test de radar dans la bande haute précision de R&S en direct lors de l'exposition au CES 2022.

CES: Ultra-Wideband Device Testing

Check out this brief demo on R&S solutions for ultra-wideband devices. Live from the CES 2022 trade show.

CES: Automotive Radar Object Simulation for Validation

Check out R&S Automotive Radar Object Simulation solutions for validations, live from the show floor at CES 2022.

Rohde & Schwarz Technology Symposium 2021

SaaS RF test platform

R&S Cloud4Testing is a software as a service (SaaS) platform that offers customers access to R&S software suites such as VSE and WinIQSIM2.

NPR (Noise Power ratio) measurements with the R&S®FSWP phase noise analyzer

The R&S®FSWP with its outstanding sensitivity to measure phase noise is now additionally equipped with the Noise power ratio (NPR) option.

Analyse de signaux de radars automobiles dans la bande E

Analyse de signaux de radars automobiles dans la bande E avec une bande passante d'analyse jusqu'à 8,3 GHz en utilisant un seul instrument.

Mesures load-pull d'un récepteur vectoriel

La combinaison du logiciel Maury Microwave Tuners plus IV CAD avec l'analyseur de réseaux vectoriels R&S®ZNA facilite les mesures load-pull du récepteur vectoriel.

De-embedding options for R&S VNAs

The R&S ZNB have new deembedding options integrated into the FW, which can easily be run with the R&S VNA.

New handheld VNA for radar & satellite ground station measurements

The R&S®ZNH is a full 2-port handheld vector network analyzer and comes in four models with maximum frequency of 4 GHz, 8 GHz, 18 GHz or 26.5 GHz.

Test RF de la 5G FR2

Une solution adaptée pour les mesures sans fil, grâce aux modules terminaux haute fréquence qui peuvent être positionnés à proximité de la chambre de mesure.

6G - Extension to a D-Band antenna measurement system

The ATS1000 CATR based 5G NR mmWave test chamber is fully shielded from the outside world to provide the ideal environment for uninterrupted measurements.

Ultra wideband 802.15.4a/4z testing

Ultra-wideband communication, as standardized by IEEE 802.15.4 enables very low power communication and very accurate ranging in license-exempt spectrum.

Test de radars automobiles dans une gamme de test d'antennes compacte

La chambre de test d'antennes R&S®ATS1500C est basée sur la méthode de la gamme de test d'antennes compacte et a spécialement été conçue pour les radars automobiles les plus récents.

Analyse impulsionnelle multicanaux à cohérence de phase

Solution évolutive simple à configurer dédiée aux systèmes radar / EW avec une analyse précise et à cohérence de phase de plusieurs signaux pulsés.

At the EuMW 2021 virtual booth we will present a new handheld instrument

Mesures de réseaux 5G à ondes millimétriques en utilisant des scanners

Avec la sortie du scanner à convertisseur abaisseur TSME44DC, les opérateurs ont dorénavant la possibilité de capturer sans fil de manière passive les données relatives à la performance et à la qualité des réseaux LTE et 5G.

Chambre sans fil CATR compacte pour le test FR2 de la 5G

Le test de signalisation dans la nouvelle bande de fréquence à ondes millimétriques 5G de la FR2 nécessite une configuration de test sans fil. Le système de test d'antennes basé sur CATR R&S®ATS800R est conçu pour des mesures sans fil FR2 en R&D.

Solution multidiffusion 5G

Grâce à cette solution, les opérateurs de réseaux mobiles peuvent faire face à la congestion et à la surcharge dans leurs réseaux cellulaires lorsqu'ils délivrent des événements très sensibles en direct et des contenus linéaires qui représentent une grosse partie de la consommation vidéo.

Test du signal de sortie de veille pour améliorer l'efficacité énergétique des appareils NB-IoT

Rohde & Schwarz et Goodix (CommSolid) sont les premiers à présenter des fonctions de test exhaustives dédiées au signaux de réveil NB-IoT nouvellement introduits (NWUS), la dernière fonctionnalité de la 3GPP communiqué 15 pour les appareils NB-IoT afin de réduire la consommation énergétique.

Comment le R&S®PACE2 catégorise le trafic IP malgré le cryptage et le NAT

La vidéo explique comment la classification des applications et l'extraction des métadonnées et des contenus révèlent des informations exploitables à partir du trafic IP. Découvrez comment les méthodes de détection évoluées permettent la visibilité de la traduction d'une adresse réseau (NAT) et la classification du trafic crypté.