R&S®FSWP Phase noise analyzer and VCO tester

High‑end analysis of signal sources and components

R&S®FSWP Phase noise analyzer and VCO tester
Show me more details
R&S®FSWP Phase noise analyzer and VCO tester
Show me more details
R&S®FSWP Phase noise analyzer and VCO tester
Show me more details
R&S®FSWP Phase noise analyzer and VCO tester
Show me more details
R&S®FSWP Phase noise analyzer and VCO tester
Show me more details

Ключевые факты

  • Cross correlation for very sensitive measurements of amplitude and phase noise in parallel, even on pulsed signals
  • Frequency range from 1 MHz up to 56 GHz, 325 GHz with external mixers
  • Internal source for measuring residual phase noise up to 54 GHz, even on pulsed signals
  • Support of external LO inputs for absolute or residual phase noise measurement up to 56 GHz
  • SCPI recorder to simplify code generation

Unrivaled low phase noise

The R&S®FSWP phase noise analyzer and VCO tester is very sensitive thanks to extremely low-noise internal sources and cross-correlation. It can measure phase noise and amplitude noise in mere seconds on highly stable sources such as those in radar applications. Additional options such as pulsed signal measurements, residual phase noise (including pulsed) characterization and integrated high‑end signal and spectrum analysis make the R&S®FSWP a unique test instrument.

Особенности и преимущества

Fastest measurement speed

Save time and multiply measurement throughput

The internal R&S®FSWP sources enable measurement of highly sensitive oscillators such as DROs and OCXOs with a minimum number of cross correlations, saving considerable time. Adding hardware accelerated signal processing to the R&S®FSWP phase noise analyzer enables real-time phase noise measurements. Short measurement time is key since it speeds up the development to manufacturing process while increasing production throughput.

Phase noise measurement
Show me more details

Phase noise measurement

Phase measurement of a high-end OCXO using cross-correlation.

Unrivaled sensitivity

Highest sensitivity for phase and amplitude noise measurement

The R&S®FSWP internal local oscillator surpasses phase-noise performance of almost any signal generator available on the market. Thanks to the internal low‑noise analyzer sources, just a few correlations are needed to measure a high-quality oscillator. This allows for the fastest possible measurement times.

Phase noise and sensitivity
Show me more details

Phase noise and sensitivity

The results can be displayed in separate windows or together in one window.

Highest flexibility

High-end phase noise analyzer and signal and spectrum analyzer in a single box

Users can examine the spectrum and demodulate the signal to measure EVM or pulse characteristics in different measurement channels. Designers of automatic test systems save space and money since they do not have to purchase an additional spectrum analyzer or vector signal analyzer. The R&S®FSWP is a future-proof investment. It is based on the high-end R&S®FSW with its unique RF performance and high sensitivity.

The R&S®FSWP does it all
Show me more details

The R&S®FSWP does it all

Vector signal analysis, pulsed signal analysis, measurement of higher harmonics, sensitive phase noise measurements, etc.

Phase noise of pulsed signals

Easy analysis of pulsed signal sources

Measuring the phase noise of pulsed sources used in radar applications has never been easier. The R&S®FSWP captures the signal and calculates all pulse parameters instantaneously. It offers cross‑correlation for phase noise tests and automatically determines the trigger/gating parameters required for pulsed source measurements. Gating enables the R&S®FSWP to achieve a larger dynamic range for pulsed phase noise measurements compared to other methods.

Pulsed signal analysis
Show me more details

Pulsed signal analysis

Automated measurement of pulse parameters in the time domain and phase noise in the frequency domain.

Residual/additive phase noise measurements

Residual PN measurements on pulsed and CW signals

For high‑end radar applications, knowing the additional phase noise added by individual components (e.g. amplifiers) to the signal path is crucial, since these influence pulse-to-pulse phase stability. The components have to be tested using pulsed signals under real-world conditions. The R&S®FSWP has an internal signal source for measuring residual phase noise or pulse-to-pulse phase stability and it also provides  additional inputs for other external sources.

Pulse-to-pulse phase stability
Show me more details

Pulse-to-pulse phase stability

3D plot of pulse-to-pulse phase stability of several bursts.

VCO characterization made easy

Measure VCO parameters automatically

The R&S®FSWP features extremely low‑noise internal DC sources to supply and control voltage-controlled oscillators (VCO). The R&S®FSWP measures not only the fundamental voltage but also the power of the higher VCO harmonics relative to the tuning voltage. It also displays phase noise at various offset frequencies relative to the tuning voltage.

VCO results
Show me more details

VCO results

Frequency, output power, tuning slope and current consumption vs. tuning voltage.

Transient analysis

Frequency and phase measurements in the time domain

The R&S®FSWP offers up to 8 GHz bandwidth for analyzing frequency or phase characteristics versus time. The R&S®FSWP also offers narrowband analysis down to 40 MHz to examine the transient response of PLLs in detail.

Transient analysis
Show me more details

Transient analysis

Persistence display of synthesizer frequency settlings.

Amplitude and phase noise in parallel

Simultaneous measurement of amplitude noise and phase noise

The R&S®FSWP allows concurrent measurement of amplitude and phase noise up to a frequency offset of 30 MHz. It displays both results simultaneously in a single window or in separate windows.

Amplitude and phase noise
Show me more details

Amplitude and phase noise

The grey area represents the improved sensitivity by cross-correlation, the yellow trace is the PN and the green one the AM noise.

Allan variance

Allan variance calculation from close-in phase noise 

To characterize oscillator frequency stability, the R&S®FSWP calculates the Allan variance from the phase noise and displays it for up to 1 million seconds (minimum offset: 1 μHz). Unlike the time domain methods, this makes it easy to suppress undesired side effects that appear as spurious emissions in the phase noise spectrum. Even short-term disturbances due to the phase noise from internal sources can be easily suppressed with cross-correlation.

Allan variance and phase noise
Show me more details

Allan variance and phase noise

Calculation of the Allan variance from 33 ns to 10 s based on the phase noise measurement for an offset range of 0.1 Hz to 30 MHz.

Доступные модели

Доступные Варианты

Связанные видео

The next level of high-end phase noise analysis: ultra-fast, ultra-sensitive, future-ready

июн. 10, 2025

Непревзойденная эффективность измерения фазового шума с помощью анализатора фазового шума R&S®FSWP

февр. 12, 2019

Измерение фазового шума на импульсных сигналах с помощью анализатора фазовых шумов R&S®FSWP

февр. 12, 2019

Высокоточные измерения фазового шума на частотах выше 50 ГГц с помощью анализатора фазовых шумов R&S®FSWP

февр. 12, 2019

Тактовый генератор и гетеродин в базовых станциях 5G (часть 3/3)

февр. 10, 2019

Тактовый генератор и гетеродин в базовых станциях 5G (часть 1/3)

февр. 10, 2019

Подробнее об измерениях фазового шума

Официальный документ «Базовая информация о методах измерения фазового шума»

Узнайте больше о том, как проводить измерения фазового шума с помощью различных инструментов.

Больше информации

Официальный документ «Базовая информация о фазовом шуме»

Этот официальный документ содержит краткое техническое введение в концепцию фазового шума, а также обзор способов измерения и регистрации фазового шума.

Больше информации

Запросить информацию

У вас есть вопросы или вам нужна дополнительная информация? Просто заполните эту форму, и мы свяжемся с вами в ближайшее время.

Ваш запрос отправлен. Мы свяжемся с вами в ближайшее время.
An error is occurred, please try it again later.
Общая и юридическая информация

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Условия и положения участия в розыгрыше призов «Осциллографы Rohde & Schwarz — 10 лет на рынке»

1. Розыгрыш призов «Осциллографы Rohde & Schwarz — 10 лет на рынке» (далее «Розыгрыш») проводится компанией Rohde & Schwarz GmbH & Co. KG, адрес: Mühldorfstraße 15, 81671, г. Мюнхен, Германия, тел. +49 89 41 29 0 (далее «R&S»).

2. Желающие принять участие в розыгрыше могут зарегистрироваться в период с 1 января 2020 г. по 31 декабря 2020 г. с указанием ФИО, названия компании и адреса корпоративной электронной почты.

3. Участие является бесплатным и не зависит от покупки товаров или услуг.

4. Участие в розыгрыше и получение призов возможно только для юридических лиц. Физические лицо не может участвовать от собственного имени, но допускается участие в качестве представителя юридического лица при условии заполнения заявки на участие от имени и по поручению юридического лица.

5. Призом в розыгрыше является один из 10 осциллографов R&S®RTB2000 в период с 1 января 2020 г. по 31 декабря 2020 г.:

Приз: 1x цифровой осциллограф R&S®RTB2000

6. Розыгрыш проводится в штаб-квартире Rohde & Schwarz по адресу Mühldorstrasse 15, 81671, г. Мюнхен. Победитель будет оповещен по электронной почте в течение 5 (пяти) рабочих дней.

7. Официальный представитель юридического лица обязуется сообщить Rohde & Schwarz о том, что приз был получен. В случае отказа от получения приза или отсутствии ответа в течение 2 (двух) недель будет определен новый победитель. Если определение победителя в течение 4 (четырех) недель не будет возможным, розыгрыш прекращается и приз отзывается.

8.Сотрудники R&S и члены их семей, а также лица, знакомые с процессом проведения розыгрыша и члены их семей не допускаются к заполнению заявки на участие.

9. Выплата стоимости приза в денежном эквиваленте не допускается. Призы не могут передаваться третьим лицам. Любые налоги, сборы, пошлины, взносы и другие платежи, взимаемые в стране участника, несет участник.

10. Персональные данные обрабатываются только в целях участия в розыгрыше и будут удалены через 4 (четыре) недели по окончании розыгрыша, если не оговорено иное.

11. Любой участник, не выполняющий данные Условия и положения, будет отстранен от участия в розыгрыше компанией R&S. В этом случае призы также могут быть отозваны задним числом. В случае если приз был отозван по причине невыполнения данных Условий и положений участник обязуется вернуть его за собственный счет на адрес R&S, указанный в п. 1, и будет определен новый победитель.

12. Участники не могут претендовать на призы этого розыгрыша, и судебное разбирательство в этом отношении не допускается.

13. Проведение розыгрыша и любые возникшие из него договорные отношения между R&S и соответствующим участником регулируются и толкуются в соответствии с законодательством Германии, без применения коллизионного права. В случае возникновения любых споров, прямо или косвенно связанных с участием в настоящем Розыгрыше, исключительной юрисдикцией обладают суды г. Мюнхена (Германия).

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.