R&S®QAT100 Advanced antenna array

R&S®QAT100 Advanced antenna array
Show me more details
R&S®QAT100 Advanced antenna array
Show me more details
R&S®QAT100 Advanced antenna array
Show me more details
R&S®QAT100 Advanced antenna array
Show me more details
R&S®QAT100 Advanced antenna array
Show me more details
R&S®QAT100 Advanced antenna array
Show me more details
R&S®QAT100 Advanced antenna array
Show me more details
R&S®QAT100 Advanced antenna array
Show me more details

Key facts

  • Unique electronically steerable antenna array
  • Extremely flexible and scalable system
  • High radial resolution and field-of-view coverage
  • 4 GHz instantaneous RF bandwidth
  • Stand-alone short-range echo generation using R&S®QAT-B5 option

Spatial moving targets without mechanical movement

As an alternative to standard RF frontends, the R&S®QAT100 offers the possibility of generating horizontal (alternatively vertical) moving targets without requiring any physical movement. With up to 2 x 96 individually switchable transmit antennas (with R&S®QAT-B2), the R&S®QAT100 ensures high resolution, high speed and high repeatability. 

Its 4 GHz instantaneous RF bandwidth together with the ability to handle up to 8 completely independent objects offer the ability to simulate even densely populated scenarios. The optional analogue stepped delay line (R&S®QAT-B5 option), allows for the simulation of short-range echoes directly in the frontend.

Features & benefits

Extremely scalable and flexible

Combine several R&S®QAT100 in order to increase the field-of-view

Several R&S®QAT100 can be combined in order to increase the field-of-view (FOV). All R&S®QAT100 advanced antenna arrays in a multi-instrument setup are synchronized via the R&S®AREG800 dynamic radar echo generator. This allows the simulation of complex ADAS scenarios.

Depending on the amount of available IF-path on the backend, densely populated scenarios with up to 8 independently moving targets can be generated.

Show me more details

Combining several R&S®QAT100 to increase the azimuthal coverage of the radar stimulation.

High speed and accuracy

Simulation of radial moving targets with extremely high speeds

The antenna spacing of only 3.7 mm provides a high radial resolution for realistic simulation of complex radar scenarios. Thanks to the electronic switching of the antennas, it is possible to simulate extremely fast radial velocities with an outstanding reproducibility.

The absence of moving parts and the missing necessity of moving the frontend for azimuthal object simulation result in reduced wear and tear and a high accuracy and repeatability of the simulated object angles.

Show me more details

Equipped with the QAT-B2 option, the R&S®QAT100 features up to 192 individually switchable transmit antennas.

Reduced close-range objects

Reducing close-range reflections to minimize interference on the radar.

The small patch antennas together with the absorber covered surface provide a clean RF frontend with very low RCS. This reduces the sensor's noise floor and potential multipath reflections.

Additionally, the R&S®QAT100 can be equipped with the R&S®QAT-B50 option, providing a shielded environment to the radar sensor and thus further reducing the potential interference with neighboring test setups.

Show me more details

The R&S®QAT100 with R&S®QAT-Z50 mounted in order to reducuce reflections and unwanted objects.

Ready for complex scenarios

Up to 8 completely independent objects on a single frontend.

In order to simulate urban scenarios, a high object density is required. The R&S®QAT100 with R&S®QAT-B2 option supports up to 8 completely independent targets that can be directed to 192 individual antennas.

To decrease the complexity for the user, the R&S®AREG800 takes care of scenario generation and automatically addresses the corresponding antennas of the R&S®QAT100.

Show me more details

The R&S®AREG800 and R&S®QAT100 with R&S®QAT-B2 option are the best performing solution when the simulation of complex radar environments is required.

Short range echo generation

Generate short-range echoes using the R&S®QAT-B5 option.

To efficiently perform parametric testing of radar sensors, long distances are not necessarily required. The optional analogue stepped delay line (R&S®QAT-B5 option) enables the instrument to simulate echoes up to approximately 13m, longer distances can be realized with an additional external delay.

Both manual operation via the on-screen menu and automation via ethernet commands is supported, enabling the automation of basic test cases and scenarios.

Show me more details

Generation of short-range echoes enables the verification of e.g. AEB functionalities.

MIMO Radar compatible

Optimized frontend for state-of-the-art MIMO sensors

Testing MIMO sensors requires the smallest possible offset between the respective receive and transmit antennas. The R&S®QAT100 with R&S®QAT-B21 frontend features 96 pairs of transmit and receive antennas with only 3.7mm of lateral offset between corresponding pairs. This allows to test the range resolution and accuracy of imaging radar sensors. The R&S®QAT-B21 option comes with an advanced absorber surface for an even lower reflectivity compared to the R&S®QAT-B11 standard frontend.

Show me more details

R&S®QAT100 equipped with R&S®QAT-B21 option for MIMO support.

Available options

Related videos

Explainer video: Implementing realistic tests on virtual roads

The R&S®QAT100 antenna array and R&S®AREG800A radar echo generator together make the most powerful and scalable automotive radar object simulation system available. Watch this video to see how its advanced features can cover all scenarios from single static objects to complex moving traffic scenarios.

10-Oct-2023

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.