Key facts
The state-of-the-art R&S®SMBV100B vector signal generator sets standards for its class. Ultra high output power, fully calibrated wideband signal generation and intuitive touchscreen operation make the R&S®SMBV100B ideal for all kinds of applications.
Always in line with the latest major digital communications standards, such as 5G NR, LTE and WLAN, the SMBV100B is the preferred test solution for receiver and component characterization.
The R&S®SMBV100B has many GNSS options that transform the instrument into a reliable, full-featured GNSS simulator. Advanced simulation capabilities can run realistic and complex yet repeatable GNSS scenarios under controlled conditions.
Quick links
Measured EVM performance vs. Level
Measured EVM performance vs. RMS level (R&S®SMBV100B equipped with R&S®SMBVB-K31 and R&S®SMBVB-B32 options).
To meet demand for higher modulation bandwidths, the R&S®SMBV100B comes with a high performance baseband. The intelligent internal real-time frequency response correction in the generator enables extremely high amplitude flatness of < 0.3 dB (measured) across the entire bandwidth of 1 GHz.
Measured frequency response
Measured frequency response across maximum RF modulation bandwidth of 500 MHz at different carrier frequencies
Ultra high output power and excellent level accuracy
When equipped with the appropriate options, the R&S®SMBV100B can produce output power of up to +34 dBm (measured at 1 GHz) and the specified level increases to +25 dBm across almost the entire frequency range.
After calibration, the generator must repeatably and precisely set level values for each test sequence. Here, the R&S®SMBV100B delivers top performance with a measured level repeatability of < 0.09 dB.
Maximum output power (measured)
Measured output power for base unit with high power option (R&S®SMBVB-K31) and additional ultra-high-power option (R&S®SMBVB-B32).
The R&S®SMBV100B has several GNSS options that transform the instrument into a reliable, full-featured GNSS simulator. Advanced simulation capabilities can run realistic and complex yet repeatable GNSS scenarios under controlled conditions. This includes realistic modeling of GNSS orbits, signal propagation effects and system errors as well as realistic modeling of the user environment.
Simulation of a combined GPS/GLONASS/BeiDou/Galileo constellation for a moving GNSS user
The intuitive operating concept makes the R&S®SMBV100B very ergonomic and practical. The customizable instrument is also ready for future requirements.
SMBV100B user interface
R&S®SMBV100B can be tailored to specific needs at any time
Configuring the instrument hardware requires just a few decisions. Six hardware options are available. Software options can be added on site at the customer facilities with keycodes.
The instrument comes fully calibrated at the factory. No downtime is needed for servicing after upgrades to extend frequency range, bandwidth or output power.
Overview of important software and hardware options
Replace your legacy signal generators: emulate generators from Rohde & Schwarz and other vendors (e.g. R&S®SMBV100A, Keysight MXG/EXG, Aeroflex and Anritsu)
Order number 1423.6270.02
8 kHz to 3 GHz (mandatory)
Order number 1423.6370.02
Frequency Extension to 6 GHz
Order number 1423.6470.02
OCXO Reference Oscillator
Order number 1423.6570.02
High Performance OCXO Reference Oscillator
Order number 1423.7260.02
1 GHz Reference Input/Output
Order number 1423.7618.02
Flexible Reference Input from 1 MHz to 100 MHz
Order number 1423.7560.02
Pulse Modulator
Order number 1423.7576.02
Pulse Generator
Order number 1423.9279.02
Pulse train
Order number 1423.7582.02
Multifunction Generator
Order number 1423.7599.02
AM/FM/φM
Order number 1423.6670.02
High Output Power
Order number 1423.6711.02
Ultra High Output Power
Order number 1423.7601.02
Phase coherence
Order number 1423.7360.02
Rear Panel Connector for RF Path
Order number 1423.7624.02
Differential Analog I/Q Outputs
Order number 1423.7630.02
Digital baseband output
Order number 1423.7653.02
ARB Memory Extension to 512 Msample
Order number 1423.7660.02
ARB Memory Extension to 1 Gsample
Order number 1423.8589.02
ARB Memory Extension to 2 Gsample
Order number 1423.7676.02
Baseband Realtime Extension
Order number 1423.7682.02
Baseband Extension to 240 MHz RF bandwidth
Order number 1423.7699.02
Baseband Extension to 500 MHz RF bandwidth
Order number 1423.8920.02
Baseband Extension to 1 GHz RF bandwidth
Order number 1423.7647.02
Bit Error Rate Tester
Order number 1423.7701.02
Envelope Tracking
Order number 1423.7718.02
AM/AM, AM/φM Predistortion
Order number 1423.8150.02
User-Defined Frequency Response Correction
Order number 1423.8820.02
Crest factor reduction
Order number 1423.8608.02
5G NR Release 15
Order number 1423.8843.02
5G NR Release 16
Order number 1423.9085.02
5G NR Release 17/18
Order number 1423.7830.02
LTE Release 8
Order number 1423.7901.02
LTE Release 9
Order number 1423.7918.02
LTE Release 10
Order number 1423.8037.02
LTE Release 11
Order number 1423.8043.02
LTE Release 12
Order number 1423.8108.02
LTE Release 13/14/15
Order number 1423.8989.02
U-Plane generation
Order number 1423.8066.02
Cellular IoT Release 13
Order number 1423.8637.02
Cellular IoT Release 14
Order number 1423.8808.02
Cellular IoT Release 15/16/17
Order number 1423.7747.02
3GPP FDD
Order number 1423.7899.02
3GPP FDD HSPA/HSPA+, Enhanced BS/MS Tests
Order number 1423.7724.02
GSM/EDGE
Order number 1423.7730.02
EDGE Evolution
Order number 1423.7776.02
1xEV-DO Rev. A
Order number 1423.7930.02
1xEV-DO Rev. B
Order number 1423.7782.02
TD-SCDMA
Order number 1423.7799.02
TD-SCDMA Enhanced BS/MS Tests
Order number 1423.8614.02
5G NR Release 15 (WinIQSIM2™)
Order number 1423.8272.02
LTE Release 8 (WinIQSIM2™)
Order number 1423.8343.02
LTE Release 9 (WinIQSIM2™)
Order number 1423.8350.02
LTE Release 10 (WinIQSIM2™)
Order number 1423.8495.02
LTE Release 11 (WinIQSIM2™)
Order number 1423.8508.02
LTE Release 12 (WinIQSIM2™)
Order number 1423.8550.02
LTE Release 13/14/15 (WinIQSIM2™)
Order number 1423.8514.02
Cellular IoT Release 13 (WinIQSIM2™)
Order number 1423.8643.02
Cellular IoT Release 14 (WinIQSIM2™)
Order number 1423.8814.02
Cellular IoT Release 15/16/17 (WinIQSIM2™)
Order number 1423.8189.02
3GPP FDD (WinIQSIM2™)
Order number 1423.8337.02
3GPP FDD HSPA/HSPA+, enhanced BS/MS tests (WinIQSIM2™)
Order number 1423.8166.02
GSM/EDGE (WinIQSIM2™)
Order number 1423.8172.02
EDGE Evolution (WinIQSIM2™)
Order number 1423.8214.02
1xEV-DO Rev. A (WinIQSIM2™)
Order number 1423.8372.02
1xEV-DO Rev. B (WinIQSIM2™)
Order number 1423.8220.02
TD-SCDMA (WinIQSIM2™)
Order number 1423.8237.02
TD-SCDMA Enhanced BS/MS Tests (WinIQSIM2™)
Order number 1423.8543.02
Verizon 5GTF Signals (WinIQSIM2™)
Order number 1423.7824.02
IEEE 802.11a/b/g/n/j/p
Order number 1423.7924.02
IEEE 802.11ac
Order number 1423.8114.02
IEEE 802.11ax
Order number 1423.8950.02
IEEE 802.11be
Order number 1423.8443.02
DFS signal generation (option for R&S®Pulse Sequencer software DFS)
Software option for standard-compliant dynamic frequency selection radar profiles.
Order number 1423.7853.02
Bluetooth® EDR
Order number 1423.8089.02
Bluetooth® 5.x
Order number 1423.9310.02
Bluetooth® 6.0
Order number 1423.7947.02
NFC A/B/F
Order number 1423.8720.02
LORA
Order number 1423.9379.02
IEEE 802.15.4 OQPSK, including support for 802.15.4ab (NB)
Order number 1423.8889.02
HRP UWB
Order number 1423.8050.02
OFDM Signal Generation
Order number 1423.8266.02
802.11a/b/g/n/j/p (WinIQSIM2™)
Order number 1423.8366.02
IEEE 802.11ac (WinIQSIM2™)
Order number 1423.8566.02
IEEE 802.11ax (WinIQSIM2™)
Order number 1423.8966.02
IEEE 802.11be (WinIQSIM2™)
Order number 1423.8295.02
Bluetooth® EDR (WinIQSIM2™)
Order number 1423.8537.02
Bluetooth® 5.x (WinIQSIM2™)
Order number 1423.9327.02
Bluetooth® 6.0 (WinIQSIM2™)
Order number 1423.8389.02
NFC A/B/F (WinIQSIM2™)
Order number 1423.8737.02
LORA (WinIQSIM2)
Order number 1423.9385.02
IEEE 802.15.4 OQPSK, including support for 802.15.4ab (NB) (WinIQSIM2™)
Order number 1423.8895.02
HRP UWB (WinIQSIM2™)
Order number 1423.8595.02
OFDM Signal Generation (WinIQSIM2™)
Order number 1423.7753.02
GPS
Adds L1 C/A, L2 C/A, L1P, L2P
Order number 1423.7960.02
Modernized GPS
Adds L2C, L5
Order number 1423.7882.02
Galileo
Adds E1 OS, E5a/E5b
Order number 1423.7953.02
Glonass
Adds G1 SPS, G2 SPS
Order number 1423.8708.02
NavIC/IRNSS
Adds NavIC L5
Order number 1423.7982.02
SBAS/QZSS
Adds QZSS, EGNOS, WAAS, MSAS and GAGAN
Order number 1423.8008.02
Real World Scenarios
Adds obscuration, multipath, antenna patterns
Order number 1423.8014.02
Real time GNSS interfaces
Adds HiL/ViL integration capabilities
Order number 1423.8789.02
Modernized Beidou
Adds B1c, B2a, B3I
Order number 1423.8743.02
Single-Satellite GNSS
GNSS production testing, 1 satellite per system
Order number 1423.8750.02
Upgrade to Dual-Frequency GNSS
Adds combined L1/L2, L1/L5 or L2/L5 scenarios
Order number 1423.8766.02
Upgrade to Triple-Frequency GNSS
Adds combined L1/L2/L5 scenarios
Order number 1423.8772.02
Add 6 GNSS channels
Adds GNSS channels to the instrument
Order number 1423.8795.02
Add 12 GNSS channels
Adds GNSS channels to the instrument
Order number 1423.8650.02
eraGlonass Test Suite
According to GOST-R-55534/33471
Order number 1423.8666.02
eCall Test Suite
According to EU2017/79, Annex VI and UNECE 2016/07
Order number 1423.8672.02
GNSS Test Suite
Order number 1423.9285.02
Car navigation test suite
Order number 1423.9356.02
Test Suite for the Chinese National GNSS test standard (GB/T)
Order number 1423.8195.02
GPS, 1 Satellite (WinIQSIM2™)
Single-satellite waveform
Order number 1423.8408.02
Modernized GPS, 1 Satellite (WinIQSIM2™)
Single-satellite waveform
Order number 1423.8320.02
Galileo, 1 Satellite (WinIQSIM2™)
Single-satellite waveform
Order number 1423.8395.02
Glonass, 1 Satellite (WinIQSIM2™)
Single-satellite waveform
Order number 1423.8489.02
BeiDou, 1 Satellite (WinIQSIM2™)
Single-satellite waveform
Order number 1423.8837.02
Modernized Beidou (WinIQSIM2™)
Single-satellite waveform
Order number 1423.8695.02
NavIC / IRNSS, 1 satellite (WinIQSIM2)
Order number 1423.8020.02
GBAS
Order number 1423.8120.02
ILS
Order number 1423.8137.02
VOR
Order number 1423.8143.02
DME
Order number 1423.8414.02
Pulse sequencing (option for R&S®Pulse Sequencer software)
Basic feature set for simulating radar signals with R&S®Pulse Sequencer software on an external PC
Order number 1423.8420.02
Enhanced pulse sequencing (option for R&S®Pulse Sequencer software)
Adds simulation capabilities for emitters and receiver including antenna patterns and antenna scans
Order number 1423.8437.02
Direction finding (option for R&S®Pulse Sequencer software)
Adds simulation capabilities for angle of arrival (AoA)
Order number 1423.8243.02
DVB-H / DVB-T (WinIQSIM2™)
Order number 1423.8250.02
SMBVB-K253 DAB/T-DMB (WinIQSIM2™)
Order number 1423.8520.02
DVB-S2/DVB-S2X (WinIQSIM2™)
Order number 1423.9262.02
DVB-RCS2 (WinIQSIM2™)
Order number 1423.9256.02
DVB-S2X-E (WinIQSIM2™)
Order number 1423.8714.71
1 waveform for signals from R&S®WinIQSIM2™, R&S®Pulse Sequencer, R&S®Pulse Sequencer (DFS)
Order number 1423.8714.72
5 waveform for signals from R&S®WinIQSIM2™, R&S®Pulse Sequencer, R&S®Pulse Sequencer (DFS)
Order number 1423.8714.75
50 waveform for signals from R&S®WinIQSIM2™, R&S®Pulse Sequencer, R&S®Pulse Sequencer (DFS)
Order number 1423.7860.02
Multicarrier CW Signal Generation
Order number 1423.7876.02
Additive White Gaussian Noise (AWGN)
Order number 1423.8972.02
Notched Signals
Order number 1423.8308.02
Multicarrier CW Signal Generation (WinIQSIM2™)
Order number 1423.8314.02
Additive White Gaussian Noise (AWGN) with WinIQSIM2™
Order number 1177.8090.00
19” Rack Adapter
Order number 6124.2531.00
USB serial adapter for RS-232 remote control
Order number 3639.9910.02
Spare CFAST Card
Order number 1423.7160.02
Removable Mass Storage
Order number 1423.8872.02
HUMS
Health and Utilization Monitoring Service
Order number 0240.2193.18
Documentation of Calibration Values
Order number 1423.8620.02
R&S®SMBV100B Accredited Calibration (ISO 17025, ISO 9000)
Related products
