7756 Results
Rohde & Schwarz Germany: Oszilloskop Seminar Tour 2019 - Agenda
Rohde & Schwarz Germany: Oszilloskop Seminar Tour 2019 - Agenda
Conducted EMS and EMI Measurements with R&S®EMC32
This application note shows how to configure, calibrate and perform conducted EMS measurements according to IEC / EN 61000-4-6 and EMI measurements according to CISPR 16-2-1 with the R&S®EMC32 software tool.
19-Jul-2013 | AN-No. 1MA212
Speeding up production test with the R&S®SMATE200A
Speeding up production test with the R&S<sup>®</sup> SMATE200A
17-Apr-2007 | AN-No. 1GP63
Optimum PLL settings for Phase Noise Measurements with the R&S®FSUP
The application note has a focus on the theoretical background of the PLL measurement method and illuminate its application in the R&S FSUP.
04-May-2010 | AN-No. 1EF72
The Y Factor Technique for Noise Figure Measurements
This application note describes in detail the steps required to make a noise figure measurement on a spectrum analyzer using the “Y Factor” technique. Background equations are presented for each step of the calculation.
25-Jul-2012 | AN-No. 1MA178
Mastering Binary Data Transfers With Your Instrument
Binary transfer with remote instruments, like the KPI-1200 Series of remote instruments. Learn about the various methods of remote binary transfer, like the KPI-1200, X-20 Series and KPI-2100 Series of instruments in this article.
31-Mar-2022 | AN-No. 1SL381
R&S®SpycerBox and STRAWBERRY®: Fast and easy project sharing: R&S®storage systems with FlavourSys®
Complex production workflows in several broadcast, post production or presentation environments not only need a solid storage architecture, but also intelligent project sharing since several teams require access to all data.
18-Nov-2014
Signals produced by SAF and SFF - Standard BG/PAL and N/PAL
Signals produced by SAF and SFF - Standard BG/PAL and N/PAL
20-Jul-2001 | AN-No. 7BM25
Automated Measurements of 77 GHz FMCW Radar Signals
This application note focuses on fully automated, fast and accurate measurements, of linear FMCW radar signals. It explains the basic signal processing, the impact on radar key performance indicators in case of linearity deviations and explains test and measurement of linear FMCW signals in detail.
25-Apr-2014 | AN-No. 1EF88
Measurement Method for Determining the Equivalent Reflection Coefficient of Directional Couplers and Power Splitters
Measurement Method for Determining the Equivalent Reflection Coefficient of Directional Couplers and Power Splitters
13-Dec-2002 | AN-No. 1EZ51
Jitter Analysis with the R&S®RTO Digital Oscilloscope
This application note presents the Jitter analysis capabilities of the R&S®RTO for digital signals. It demonstrates the basic operation with an application example, and shows the associated jitter analysis.
29-Aug-2013 | AN-No. 1TD03
Design and Use of a DTV Monitoring System consisting of R&S®DVQ(M), R&S®DVMD/DVRM and R&S®DVRG
Design and Use of a DTV Monitoring System consisting of DVQ(M), DVMD/DVRM and DVRG
15-Feb-2002 | AN-No. 7BM38
C/N Ratio at Low Carrier Frequencies in R&S®SFQ
C/N Ratio at Low Carrier Frequencies in SFQ
20-Jul-2001 | AN-No. 7BM09
Guidance on Selecting and Handling Coaxial RF Connectors used with Rohde & Schwarz Test Equipment
This application note focuses on coaxial connectors found in RF and microwave applications, providing general information on the available types.
09-Apr-2015 | AN-No. 1MA99
Methods to obtain trusted RMS results on the R&S®RTM
RMS is one of the most common parameters in test and measurement. Mathematically, it is the quadratic mean of continuously varying values (waveform). R&S RTM-K32 option provides a digital RMS conversion function for a high-bandwidth RMS measurement.
17-Aug-2015
HSUPA RF Measurements with the R&S®CMW500 in line with 3GPP TS 34.121
This document provides a step-by-step guide on how to use a stand-alone R&S®CMW500 to take Rel-6 measurements on transmitter characteristics and execute performance tests according to TS 34.121 V9.7.0, clauses 5 and 10.
27-Nov-2013 | AN-No. 1CM97
Migration to Visual Studio .NET 2005 of proprietary Test Cases
Migration to Visual Studio .NET 2005 of proprietary Test Cases
28-Nov-2007 | AN-No. 1CM63
Automatic DAB Receiver Test - Test of Re-Synchronisation Capability
Automatic DAB Receiver Test - Test of Re-Synchronisation Capability
11-Nov-2005 | AN-No. FTK04
Crowdsourcing versus mobile network testing
This application card describes the structure of the crowdsourcing space and analyzes the pros and cons of both approaches.
06-Oct-2022
Reproducable Noise Figure Measurement Using the Shielded Box ZA-SB10
Reproducable Noise Figure Measurement Using the Shielded Box ZA-SB10
16-Oct-2002 | AN-No. RSH01
Compliance Testing, Functional Testing and Debugging of HDMI Interfaces
This application note focuses on functional testing and debugging of HDMI interfaces using the R&S®VTC/VTE/VTS. It explains how these instruments can be used to assess the HDCP implementation, the ARC or the CEC functionality.
04-Jun-2014 | AN-No. 7BM85
Advanced Signal Analysis using the History Mode of the R&S®RTO Oscilloscope
The R&S®RTO Oscilloscope supports the acquisition and the detailed signal analysis of these signals by using the history mode. The history mode allows the user to look back to previous acquisitions and apply the wide set of analysis functions of the RTO.
03-Jun-2013 | AN-No. 1TD02
Electronically steerable frontend for qualifying automotive radar
Learn more about the world’s first fully electronically steerable antenna array.
27-Jun-2023