9004 Results
This document provides information on how to perform manual testing based on current R&S TA-TRS QuickStep V4.05 platform in order to adapt to the new released EN 303 345.
14-Apr-2021
PESQ<sup>®</sup> Measurement for WCDMA with R&S<sup>®</sup>CMUgo
05-Jan-2012 | AN-No. 1MA137
This application note demonstrates Rohde & Schwarz test solutions for generating WLAN 802.11ac signals and explains step-by-step how to configure a test signal. Several measurements are presented to illustrate EVM performance.
26-Apr-2013 | AN-No. 1GP94
Frequency Response Compensation for SMx Generator Series
27-Oct-2009 | AN-No. 1MA56
Seamless Level Setting on the R&S SFU
23-Jun-2006 | AN-No. 7BM54
Measuring Bit Error Rate using the R&S SFU-K60 Option
19-Dec-2006 | AN-No. 7BM51
This application note explains how to perform LTE base station measurements over the air (OTA) using the R&S®FSH4/8/13/20 handheld spectrum analyzer.
12-Sep-2013 | AN-No. 1EF87
In addition to the generic edge trigger, modern oscilloscopes offer triggers that are specialized to address specific problems.
04-Jan-2016
Demonstration of BER Test with AMIQ controlled by WinIQSim
29-Sep-1998 | AN-No. 1MA16
Power converters with a full-bridge topology are frequently used in telecommunications and servers that need to be compact, efficient and cost sensitive, making them more complex. Switching patterns for all the main primary switches including synchronous rectifier switches need to be validated after the first protype is built. This complex validation requires proper measurement of switching patterns to prevent catastrophic switching patterns. Expertise and the right measurement tools are essential when identifying unexpected events in the converter switching process.
17-Jan-2024
Generating 3GPP Multi Carrier Signals for Amplifier Tests with R&S SMIQ03HD and WinIQSIM™
02-Sep-2002 | AN-No. 1GP52
he option R&S EMC32-K84 extends the internal report generator to support the generation of a summary test report over all selected test cases done for a DUT.
23-Apr-2015 | AN-No. 1SP09
Power and Modulation Measurements on VHF Transmitters Example: Rohde & Schwarz VHF-FM Transmitter SU115
04-Jun-1998 | AN-No. 1EF09
The R&S®HMC8015 power analyzer provides seamless acquisition and realtime signal processing and accelerates the measurement.
12-Oct-2018
Vector Network Analyzers of t ZNA and ZNB family are able to measure magnitude and phase of complex S-parameters of a device under test (DUT) in the frequency domain.
30-Jul-2020 | AN-No. 1EP83
This document describes Bluetooth Low Energy RF over-the-air RX and TX measurements using advertising channels for communication with Bluetooth Low Energy devices.
14-Dec-2020 | AN-No. 1C109
VOR-Receiver Tests using the Signal Generator SMT
06-Jul-1994 | AN-No. 1GPAN10
This application note provides guidance on the use of the software option, both for direct control and programming via the touchscreen, and for remote control using SCPI.
13-Jul-2020 | AN-No. GFM345
How to implement GTSL outside a test stand environment
02-Jul-2002 | AN-No. 1SC01
Rohde & Schwarz offers a flexible test solution for the high demands of R&D and highthroughput production environments.
21-Mar-2017
The R&S®SMA100B analog RF and microwave signal generator with its high-quality pulse modulator provides narrow pulse modulation.
30-May-2017
Get deep insight into your design with a dual-path, precisely synchronized source driving the Doherty amplifier and improve your yield.
12-Jul-2018
The R&S®NGL200 and R&S®NGM200 can simulate battery cells when testing battery management systems and replace far more expensive dedicated battery simulators.
08-Jun-2020
This application note describes how to measure the antenna pattern of a mm-Wave device in the R&S®ATS1000 shielded chamber. This includes the required calibration of the measurement setup and a possible near field to far field transformation when measuring larger devices.
28-May-2018 | AN-No. 1MA304
Guidelines for MIMO Test Setups – Part 2
14-Oct-2009 | AN-No. 1GP51
Using the Frequency Conversion Mode of the ZVR Vector Network Analyzer
19-Jan-1999 | AN-No. 1EZ47
A time-gated spectrum scan applies a time gate on uplink/downlink slots/symbols or guard period and helps identifying interference in operational 5G TDD networks.
21-Sep-2023 | AN-No. 8NT08
High dynamic range current measurements on IoT devices
01-Oct-2019
eCall is deployed in Europe and is required by law in new cars as of March 2018. Next generation eCall (NG eCall) is built on LTE and 5G.
06-Jun-2018
This application notes introduces two alternative methods how to do the Power Added Efficiency measurement.
22-May-2013 | AN-No. 1EZ64