R&S®RTA4000 Oscilloscope

Key Facts

Bandwidth: 200 MHz to 1 GHz
Sample rate: up to 5 Gsample/s
Memory depth: up to 1 Gsample
ADC resolution: 10-bit
Display: 10.1’’ capacitive touchscreen

See more of your signal with the power of 10

Designed with top class signal integrity and responsive ultra-deep memory, the R&S®RTA4000 brings the power of 10 to a new level. The Rohde & Schwarz designed 10-bit ADC plus best-in-class noise and memory depth for sharp waveforms, more accurate measurements and confidence when faced with unexpected measurement challenges.

Quick Links

Available Models
Available Options
Show all Downloads

Features & benefits

Signal analysis: quick results

See small signal details in the presence of large signals

The R&S®RTA4000 has a customized Rohde & Schwarz 10-bit A/D converter and is a four-fold improvement over conventional 8-bit A/D converters. The increased resolution results in sharper waveforms with more signal details that would otherwise be missed. One example is the characterization of switched-mode power supplies. The voltage across the switching device must be determined during the on/off times within the same acquisition.

Segmented memory

100 Mpoint standard and 200 Mpoint interleaved

The R&S®RTA4000 has top-class memory depth of 100 Mpoints per channel and 200 Mpoint in interleaved mode. This is ten times more than similar oscilloscopes in the same instrument class. Users can capture longer acquisition sequences even at high sampling rates for more analysis results, such as when examining transients in switched-mode power supplies.

**100 Msample standard memory** - Capture and analyze pulsed and burst signals over a long period with up to 200 Mpoint standard acquisition memory

Capture more time at full bandwidth

Segmented memory: 1000 Mpoint with history function

The R&S®RTA-K15 option with deep, segmented memory analyzes signal sequences over a long observation period. Protocol-based signals with communications gaps such as I²C or SPI can be captured over several seconds or minutes. The variable segment sizes enable optimal utilization of the 1000 Mpoint memory. In history mode, previous acquisitions in the maximum segmented memory depth of 1000 Mpoint can be used for further analysis.

**1000 Mpoint segmented memory** - Capture the longest time periods with top-class 1000 Mpoint memory

Logic analysis with the MSO option

16 additional digital channels

The R&S®RTA-B1 option turns every R&S®RTA4000 into an intuitive MSO with 16 additional digital channels. The oscilloscope captures and analyzes signals from the analog and digital components of an embedded design - synchronized and time correlated to each other. The delay between A/D converter input and output can be conveniently determined with cursor measurements.

**Four-bit DAC signal change.** - The R&S®RTA4000 captures and analyzes analog and digital signals that are synchronized and time-correlated with each other.

Waveform and pattern generator

Generate analog and digital stimuli

The R&S®RTA-B6 waveform and pattern generator for up to 50 Mbit/s can be used in educational settings and prototype hardware implementation. Apart from the common sine, square/pulse, ramp and noise waveforms, it outputs arbitrary waveforms and 4-bit signal patterns. Waveforms and patterns can be imported as CSV files or copied from oscilloscope waveforms. Predefined patterns include. I2C, SPI, UART and CAN/LIN.

Digital voltmeter

Measure and display electrical potential

The R&S®RTA4000 features a 3-digit voltmeter (DVM) and 6-digit frequency counter on each channel for simultaneous measurements. Standard measurement functions include DC, AC+DC (RMS) and AC (RMS).

**Digital voltmeter** - The 3-digit voltmeter measures and displays the electrical potential difference between two points in an electric circuit.

Frequency analysis mode

Difficult-to-find faults often result from the interaction between time and frequency signals. The R&S®RTA4000 FFT function is activated at the push of a button or by simply entering the center frequency and span. The high-performance FFT function in the R&S®RTA4000 oscilloscope can be used to analyze signals with up to 128k points. Other practical tools include cursor measurements and autoset in frequency domain.

**FFT of a square wave** - The high-performance FFT functionality analyzes signals up to 128k points.

Mask test mode

Mask tests quickly reveal whether a specific signal lies within defined tolerance limits. Masks assess the quality and stability of a DUT based on statistical pass/fail evaluations. Signal anomalies and unexpected results are quickly identified. When the mask is violated, the measurement stops. Each violation generates a pulse output at the AUX-OUT connector on the R&S®RTA4000. This pulse output can be used to trigger actions in the measurement setup.

**Mask test with result statistics** - The pass/fail evaluation assesses DUT quality and stability.

The best choice for power

See power signal details with up to 10-bit resolution

Even the smallest details of a high dynamic signal are important to power measurements. RDS (on) verification for a MOSFET is one example. The high ADC resolution of R&S®RTA4000 oscilloscopes increases vertical resolution up to 10 bits. Previously unseen signal details are revealed and measurable. The RDS(on) example shows how the slope of the drain-to-source-voltage can be measured while the switch is closed.

**Power analysis** - Analyze input, output and transfer functions of switched-mode power supplies

Available models

Specifications

Vertical system
Analog channels		4
Digital channels (opt.)		16
Bandwidth (-3 dB)	R&S®RTA4004 (with R&S®RTA-B24x options)	200 MHz, 350 MHz, 500 MHz, 1 GHz
Rise time	R&S®RTA4004 (with R&S®RTA-B24x options)	1.75 ns, 1 ns, 700 ps, 350 ps
Input impedance		50 Ω ± 1,5% (meas.), 1 MΩ ± 1 % (meas.) \|\| 14 pF ± 1 pF (meas.)
Input sensitivity	max. bandwidth in all range	at 1 MΩ: 500 μV/div to 10 V/div at 50 Ω: 500 μV/div to 1 V/div
ADC resolution		10 bit, up to 16 bit with high resolution decimation
DC gain accuracy	offset and position = 0, maximum operating temperature change of ±5°C after self-alignment	input sensitivity > 5 mV/div: ±1 % of full scale input sensitivity ≤ 5 mV/div to ≥ 1 mV/div: ±1.5 % of full scale input sensitivity < 1 mV/div: ±2.5 % of full scale
Acquisition system
Real-time sampling rate		2.5 Gsample/s; 5 Gsample/s, interleaved
Acquisition memory		100 Mpoint (200 Mpoint, interleaved); 1 Gsample segmented memory
Max. acquisition rate		64 000 waveforms/s (2 000 000 in fast segmented memory mode)
Horizontal system
Timebase range		selectable between 0.5 ns/div and 500 s/div
Accuracy (after delivery/calibration)		±0.5 ppm
Channel-to-channel skew		< 200 ps (meas.)
Channel deskew		±500 ns
Trigger system
Standard trigger types		edge, width, video (PAL, NTSC, SECAM, PAL-M, SDTV 576i, HDTV 720p, HDTV 1080i, HDTV 1080p), pattern, line, serial bus
Optional trigger types		I²C, SPI, UART/RS-232/RS-422/RS-485, CAN/LIN, audio (I²S),ARINC 429, MIL-STD-1553
Trigger sensitivity		with DC, AC, LF reject, noise reject 1 GHz, 500 MHz, 350 MHz > 2.2 mVpp input sensitivity + 1 div (nom.) (input sensitivity: [mV/div]) 200 MHz, 100 MHz > 1.5 mVpp input sensitivity + 0.8 div (nom.) (input sensitivity: [mV/div]) 20 MHz > 0.6 mVpp input sensitivity + 0.4 div (nom.) (input sensitivity: [mV/div]) with HF reject all input sensitivities 1 div (meas.)
Analysis and measurement functions
Automatic measurements		32
Cursor measurements		4
Waveform mathematics		Five equations math-on-math functions (addition, subtraction, multiplication, division, square, square root, abs. value, reciprocal, inverse, common log,, natural log., derivative, integral, low pass, high pass, track unipolar + bipolar on period, frequency, pulse width, duty cycle)
Mask testing
Mask definition		elementary (tolerance mask around the signal)
History and segmented memory
Number of segments		up to 87 380
Protocol trigger and decode
Supported protocols		I²C, SPI, UART/RS-232/RS-422/RS-485, CAN, LIN, I²S, MIL-STD-1553, ARINC429
Waveform generator
Resolution		14 bit
Sample rate		250 Mpoint/s
Amplitude	high Z; 50 Ω	20 mV to 10 V (V_pp); 10 mV to 5 V (V_pp)
DC offset	high Z; 50 Ω	±5 V; ±2.5 V
Arbitrary		max. 10 Mpoint/s; 32k point
Logic analyzer (MSO) functionality
Digital input channels		16
MSO memory depth		two logic probes: 100 Mpoint for every channel one logic probe: 200 Mpoint for every channel
MSO Bandwidth		400 MHz (meas.)
MSO sampling rate		2.5 Gsample/s; 5 Gsample/s, interleaved
MSO input impedance		100 kΩ ± 2 % \|\| ~4 pF (meas.) at probe tips
Parallel buses		up to 4
General data
Dimensions	W × H × D	390 mm × 220 mm × 152 mm (15.4 in × 8.66 in × 5.98 in)
Weight		3.3 kg (7.3 lb)
Display		10.1" WXGA TFT color display (1280 × 800 pixel)
Interfaces		USB host with MTP, USB device, LAN, powerful web server for remote display and operation
Operating system		Embedded

Available options

R&S®RTA4000 - Centro de mídia

R&S®RTA4000 - Centro de mídia

Veja mais

Vídeos de aplicação dos osciloscópios - Centro de mídia

Veja mais

Solução para

Design e teste analógico/digital

Confira as soluções Rohde & Schwarz para integridade de sinal e potência, medição de sinais pequenos e depuração EMI.

Mais Informações

Testes de eletrônica de potência

Permita que as nossas soluções de teste e medição ajudem você a criar produtos confiáveis e de baixo consumo de energia.

Mais Informações

Peça informações

Você tem alguma pergunta ou precisa de informação adicional? Simplesmente preencha este formulário e nós respondemos imediatamente.

Sr.

Sra.

Sem informação

Nome

Sobrenome

Endereço eletrônico

Empresa

País

Telefone (por exemplo: +1 400 123 5678)

Código postal

Cidade

Consulta

Email confirmation (optional)

O seu pedido foi submetido. Iremos contactá-lo em breve.

An error is occurred, please try it again later.

Informações gerais e legais

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termos e condições do sorteio de prêmios: 10 anos dos osciloscópios da Rohde & Schwarz

1. O sorteio de prêmios “10 anos dos osciloscópios da Rohde & Schwarz” (no presente, referido como “Sorteio”) é organizado pela Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munique, Alemanha, tel. +49 89 41 29 0 (doravante referida como “R&S”).

2. Todos os participantes podem se inscrever durante o período de 1º de janeiro de 2020 a 31 de dezembro de 2020, informando seu nome, nome da empresa e e-mail comercial.

3. A participação é gratuita e não depende da compra de mercadorias ou serviços.

4. O sorteio está aberto somente a pessoas jurídicas e apenas às pessoas jurídicas que possam ganhar os prêmios. Pessoas físicas não poderão participar em nome e interesse próprios, mas como representantes de uma pessoa jurídica, devendo preencher a ficha de participação em nome e segundo o interesse da pessoa jurídica.

5. Os prêmios a serem entregues são 1 de 10 R&S®RTB2000, no período de 1º de janeiro de 2020 a 31 de dezembro de 2020:

Prêmio: 1 osciloscópio digital R&S®RTB2000

6. O sorteio ocorrerá na sede da R&S, em Munique, à Muehldorstrasse 15, 81671. O ganhador dos prêmios será avisado por e-mail no prazo de cinco (5) dias úteis.

7. O representante autorizado da pessoa jurídica informará à R&S sobre a aceitação do preço. Caso a aceitação seja negada ou se não houver resposta em até duas (2) semanas, um novo ganhador será sorteado. Se não for possível definir um ganhador no prazo de quatro (4) semanas, o sorteio se encerrará e o prêmio prescreverá.

8. Aos funcionários da R&S e seus familiares, bem como às pessoas familiarizadas com o processo do sorteio e seus familiares, é vetado o preenchimento da ficha de participação.

9. Não são permitidos equivalente em dinheiro ou troca de prêmios. Os prêmios são intransferíveis. Todos os impostos, tributos, encargos, taxas e outras cobranças tributáveis no país do participante serão arcadas pelo participante.

10. Dados pessoais somente serão processados para os fins deste sorteio e excluídos quatro (4) semanas após o sorteio, se não acordado de outro modo.

11. O participante que não cumprir os presentes Termos e Condições estará sujeito à desclassificação pela R&S da participação neste concurso. Neste caso, os prêmios também poderão ser retirados retroativamente. Se um prêmio estiver sujeito à retirada retrospectiva por motivo de incumprimento dos presentes Termos e Condições, ele deverá ser devolvido pelo respectivo participante, às suas expensas, para o endereço da R&S mencionado na disposição N.1, e um novo ganhador será sorteado.

12. Os participantes não podem reivindicar os prêmios do sorteio e não são autorizados recursos legais neste sentido.

13. O sorteio e a relação contratual decorrente, entre a R&S e o respectivo participante, serão regidos e interpretados de acordo com as leis da Alemanha, sem dar efeito ao princípio do conflito de leis. Os tribunais de Munique, Alemanha, gozarão de jurisdição exclusiva em caso de disputa decorrente, direta ou indiretamente, da participação neste concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.

R&S®RTA4000 Oscilloscope

See more of your signal with the power of 10

Features & benefits

Signal analysis: quick results

Segmented memory

Capture more time at full bandwidth

Logic analysis with the MSO option

Waveform and pattern generator

Digital voltmeter

Frequency analysis mode

Mask test mode

The best choice for power

Available models

R&S®RTA4004

R&S®RTA4004 + RTA-B243

R&S®RTA4004 + RTA-B245

R&S®RTA4004 + RTA-B2410

Available options

R&S®RTA4000 - Centro de mídia

R&S®RTA4000 - Centro de mídia

Vídeos de aplicação dos osciloscópios - Centro de mídia

Solução para

Design e teste analógico/digital

Testes de eletrônica de potência

R&S®RTA4000 Oscilloscope

See more of your signal with the power of 10

Features & benefits

Signal analysis: quick results

Segmented memory

Capture more time at full bandwidth

Logic analysis with the MSO option

Waveform and pattern generator

Digital voltmeter

Frequency analysis mode

Mask test mode

The best choice for power

Available models

R&S®RTA4004

R&S®RTA4004 + RTA-B243

R&S®RTA4004 + RTA-B245

R&S®RTA4004 + RTA-B2410

Available options

Related Downloads

R&S®RTA4000 - Centro de mídia

R&S®RTA4000 - Centro de mídia

Vídeos de aplicação dos osciloscópios - Centro de mídia

Solução para

Design e teste analógico/digital

Testes de eletrônica de potência

R&S®RTM3000

R&S®Scope Rider

R&S®RTE1000

R&S®RTO2000