Key Facts
Performance and functionality requirements vary depending on test setup and application. The R&S®SMW200A is unrivaled in mastering these varied requirements and sets new standards for signal generators. When developing and verifying any type of DUT, including components, modules and complete base stations – the R&S®SMW200A easily generates the appropriate test signals with top performance. The R&S®SMW200A has a flexible modular design that can be equipped with exactly options that applications require. Any configuration is possible, from a classic single-path vector signal generator to a multichannel MIMO receiver tester.
Quick Links
The R&S®SMW200A covers the frequency range up to 67 GHz as a single-path instrument and up to 44 GHz as a dual-path instrument. It can also be equipped with a maximum of two internal baseband modules and four fading simulator modules. This concept yields two full-featured vector signal generators in a single unit, enabling easy generation of complex signal scenarios.
R&S®SMW200A with two RF paths up to 44 GHz
The standard high-end synthesizer in the R&S®SMW200A provides exceptional SSB phase-noise and nonharmonic performance. Several low phase-noise options are available to further improve performance. The R&S®SMW-B711/B721 ultra-low phase-noise options enable best-in-class phase-noise performance. The R&S®SMW200A is perfect for measurements that demand spectral purity.
Measured SSB phase noise performance, R&S®SMW-B711
The wideband I/Q modulator with up to 2 GHz RF bandwidth covers all applications in its frequency range, including wireless communications, satellite communications and radar. The internal baseband can generate signals with a maximum 2 GHz RF modulation bandwidth.
State-of-the-art D/A converters and excellent RF chain design ensure exceptional modulation frequency response of < 0.4 dB over 2 GHz bandwidth with excellent EVM performance. The R&S®SMW200A generates 5G NR signals (100 MHz channel bandwidth, 64QAM, 3.4 GHz carrier frequency) with an EVM of 0.1% (meas.), or WLAN IEEE802.11be signals (320 MHz, 7 GHz carrier frequency) with an EVM of -53 dB (meas.).
Measured EVM vs. carrier frequency for 5G NR 100 MHz
The R&S®SMW200A offers integrated channel emulation for up to 800 MHz of fading bandwidth. Fading profiles for all major standards are available as presets. With up to 64 fading channels, all key MIMO fading scenarios such as 2x2, 3x3, 4x4, 8x4, 4x8 and 8x8 can be configured in a single instrument. Aggregation of up to eight carriers is also supported and SGT100A signal generator modules can be connected to provide up to eight RF paths.
4x8 MIMO setup with 8 RF outputs
Two-path R&S®SMW200A with six R&S®SGT100A signal generator modules operated from the R&S®SMW200A;
The built-in R&S®SMW200A graphics function displays generated signals in real time. The user can select the type of display, e.g. I/Q vs. time, frequency spectrum, vector diagram or CCDF. The R&S®SMW200A also offers a SCPI macro recorder with code generator, which records all manual operating steps to generate a file with a remote command sequence. Integrated code templates are provided for directly generating executable code for MATLAB®, CVI or Python.
Graphical signal monitoring in real time
Graphical signal monitoring in real time is extremely useful when generating complex signals.
Order Number 1428.4700.02
100 kHz to 3 GHz (Path A)
Order Number 1428.4800.02
100 kHz to 6 GHz (Path A)
Order Number 1428.7700.02
100 kHz to 7.5 GHz (Path A)
Order Number 1428.4900.02
100 kHz to 12.75 GHz (Path A)
Order Number 1428.5107.02
100 kHz to 20 GHz (Path A)
Order Number 1428.5307.02
100 kHz to 31.8 GHz (Path A)
Order Number 1428.8506.02
100 kHz to 40 GHz (Path A)
Order Number 1428.8606.02
100 kHz to 40 GHz (Path A) I/Q modulation bandwidth and min. pulse width limited
Order Number 1428.5507.02
100 kHz to 44 GHz (Path A)
Order Number 1428.5407.02
100 kHz to 44 GHz (Path A) I/Q modulation bandwidth and min. pulse width limited
Order Number 1442.0144.02
100 kHz to 44 GHz (Path A)
I/Q modulation bandwidth and min. pulse width limited
Order Number 1438.9357.02
100 kHz to 56 GHz (Path A)
Order Number 1438.9457.02
100 kHz to 56 GHz (Path A)
I/Q modulation bandwidth and min. pulse width limited
Order Number 1442.0244.02
100 kHz to 56 GHz (Path A)
I/Q modulation bandwidth and min. pulse width limited
Order Number 1428.8106.02
100 kHz to 67 GHz (Path A)
Order Number 1428.8306.02
100 kHz to 67 GHz (Path A)
I/Q modulation bandwidth and min. pulse width limited
Order Number 1442.0344.02
100 kHz to 67 GHz (Path A)
I/Q modulation bandwidth and min. pulse width limited
Order Number 1428.5707.02
100 kHz to 3 GHz (Path B)
Order Number 1428.5807.02
100 kHz to 6 GHz (Path B)
Order Number 1428.7900.02
100 kHz to 7.5 GHz (Path B)
Order Number 1438.8950.02
100 kHz to 12.75 GHz (Path B)
Order Number 1428.6103.02
100 kHz to 20 GHz (Path B)
Order Number 1438.8750.02
100 kHz to 31.8 GHz (Path B)
Order Number 1438.8350.02
100 kHz to 44 GHz (Path B)
Order Number 1438.8550.02
100 kHz to 44 GHz (Path B) I/Q modulation bandwidth and min. pulse width limited
Order Number 1442.0444.02
100 kHz to 44 GHz (Path B)
I/Q modulation bandwidth and min. pulse width limited
Order Number 1428.7300.02
Low phase noise (Path A)
Order Number 1428.6503.02
Improved close-in phase noise (Path A)
Order Number 1428.6703.02
Ultra low phase noise (Path A)
Order Number 1428.7500.02
Low phase noise (Path B)
Order Number 1428.6903.02
Improved close-in phase noise (Path B)
Order Number 1428.7100.02
Ultra low phase noise (Path B)
Order Number 1413.7380.02
100 MHz, 1 GHz ultra low noise reference input/output
Order Number 1414.6541.02
Flexible reference input (1 MHz to 100 MHz)
Order Number 1413.3249.02
Pulse Modulator
Order Number 1413.3284.02
High-Performance Pulse Generator
Order Number 1413.3332.02
Multifunction Generator
Order Number 1413.7438.02
AM/FM/φM
Order Number 1413.5841.02
Phase Coherence
Order Number 1414.6758.02
Frontend control
Order Number 1413.5893.02
Rear Panel Connectors for RF Path A (3/6 GHz) and I/Q
Order Number 1413.5941.02
Rear Panel Connectors for RF Path B (3/6 GHz)
Order Number 1414.0937.02
Rear Panel Connectors for RF Path A (20/31.8/40 GHz) and I/Q
Order Number 1414.1033.02
Rear Panel Connectors for RF Path B (20 GHz)
Order Number 1413.7167.02
Differential Analog I/Q Inputs
Order Number 1413.2807.02
Signal routing and baseband main module, one I/Q path to RF
Order Number 1413.3003.02
Signal routing and baseband main module, two I/Q paths to RF
Order Number 1413.1200.02
Baseband generator with real-time coder and ARB (64 Msample), 120 MHz RF bandwidth
Order Number 1414.4303.02
Baseband generator for GNSS with high dynamic range, ARB (64 Msample) and digital modulation (real-time), 120 MHz RF bandwidth
Order Number 1413.3384.02
Differential Analog I/Q Outputs
Order Number 1413.3432.02
Digital Baseband Output
Order Number 1413.9218.02
Extended Sequencing
Order Number 1413.6860.02
ARB Memory Extension to 512 Msample
Order Number 1413.6919.02
ARB Memory Extension to 1 Gsample
Order Number 1413.6960.02
Baseband Extension to 160 MHz RF bandwidth
Order Number 1413.9724.02
Slow I/Q
Order Number 1413.8005.02
Wideband baseband main module, two I/Q paths to RF
Order Number 1413.7350.02
Wideband baseband generator with ARB, (256 Msample), 500 MHz RF bandwidth
Order Number 1414.2346.02
Wideband Differential Analog I/Q Outputs
Order Number 1414.3865.02
Digital Baseband Output for SMW Wideband Baseband
Order Number 1413.9260.02
Wideband Extended Sequencing
Order Number 1414.3620.02
Real-time control interface, real-time control interface for PDW streaming
Order Number 1414.3665.02
High speed upgrade of PDW rate. Upgrade to max. 2 MPDW/s per baseband generator
Order Number 1413.9360.02
ARB Memory Extension to 2 Gsample
Order Number 1414.6129.02
Baseband Extension to 1 GHz RF bandwidth
Order Number 1414.6158.02
Baseband Extension to 2 GHz RF bandwidth
Order Number 1414.6187.02
Bit Error Rate Tester
Order Number 1414.6206.02
ARB Ethernet upload
Order Number 1413.7215.02
Envelope Tracking
Order Number 1413.7267.02
Digital Predistortion
Order Number 1414.3707.02
User-defined frequency response correction
Order Number 1414.6487.02
Digital Doherty
Order Number 1414.6641.02
Crest factor reduction
Order Number 1414.6229.02
Bandwidth extension
Order Number 1434.8379.02
RF linearization
Order Number 1413.1500.02
Fading Simulator (standard)
Order Number 1414.4710.02
Fading Simulator (wideband)
Order Number 1413.3532.02
Dynamic Fading
Order Number 1413.3584.02
Enhanced Fading Models
Order Number 1414.2300.02
OTA-MIMO Fading Enhancements
Order Number 1413.3632.02
MIMO Fading/Routing
Order Number 1413.9576.02
Higher Order MIMO
Order Number 1413.9624.02
Multiple Entities
Order Number 1413.7315.02
Stream Extender
Order Number 1414.2581.02
Customized Dynamic Fading
Order Number 1414.4403.02
MIMO subsets for higher-order MIMO
Order Number 1414.6712.02
Fading Bandwidth Extension to 400 MHz
Order Number 1414.6735.02
Fading Bandwidth Extension to 800 MHz
Order Number 1414.4990.02
5G NR Release 15
Order Number 1414.6664.02
5G NR Release 16
Order Number 1414.6506.02
5G New Radio Closed-Loop BS Test
Order Number 1414.3465.02
Verizon 5GTF signals
Order Number 1413.4180.02
LTE Release 8
Order Number 1413.5435.02
LTE Release 9
Order Number 1413.5487.02
LTE Release 10
Order Number 1413.8505.02
LTE Release 11
Order Number 1414.1933.02
LTE Release 12
Order Number 1414.3542.02
LTE Release 13/14/15
Order Number 1413.3261.02
U-Plane generation
Order Number 1414.2723.02
Cellular IoT Release 13
Order Number 1414.6064.02
Cellular IoT Release 14
Order Number 1414.6564.02
Cellular IoT Release 15/16/17
Order Number 1413.4480.02
LTE Closed-Loop BS Test
Order Number 1413.3784.02
3GPP FDD
Order Number 1413.4580.02
3GPP FDD HSPA/HSPA+, enhanced BS/MS tests
Order Number 1413.3684.02
GSM/EDGE
Order Number 1413.3732.02
EDGE Evolution
Order Number 1413.3932.02
1xEV-DO Rev. A
Order Number 1413.6519.02
1xEV-DO Rev. B
Order Number 1413.4039.02
TD-SCDMA
Order Number 1413.4080.02
TD-SCDMA Enhanced BS/MS tests
Order Number 1413.4539.02
Log File Generation
Order Number 1413.4439.02
TETRA Release 2
Order Number 1414.5022.02
5G NR Release 15 (WinIQSIM2™)
Order Number 1413.7296.02
5G NR Release 17/18 (WinIQSIM2™)
Order Number 1414.3507.02
Verizon 5GTF signals (WinIQSIM2™)
Order Number 1413.5235.02
LTE Release 8 (WinIQSIM2™)
Order Number 1413.5535.02
LTE Release 9 (WinIQSIM2™)
Order Number 1413.5587.02
LTE Release 10 (WinIQSIM2™)
Order Number 1413.8557.02
LTE Release 11 (WinIQSIM2™)
Order Number 1414.2030.02
LTE Release 12 (WinIQSIM2™)
Order Number 1414.3588.02
LTE Release 13/14/15 (WinIQSIM2™)
Order Number 1414.2769.02
Cellular IoT Release 13 (WinIQSIM2™)
Order Number 1414.6093.02
Cellular IoT Release 14 (WinIQSIM2™)
Order Number 1413.4839.02
3GPP FDD (WinIQSIM2™)
Order Number 1413.6290.02
3GPP FDD HSPA/HSPA+, enhanced BS/MS tests (WinIQSIM2™)
Order Number 1413.4739.02
GSM/EDGE (WinIQSIM2™)
Order Number 1413.4780.02
EDGE Evolution (WinIQSIM2™)
Order Number 1413.4980.02
1xEV-DO Rev. A (WinIQSIM2™)
Order Number 1413.6560.02
1xEV-DO Rev. B (WinIQSIM2™)
Order Number 1413.5087.02
TD-SCDMA (WinIQSIM2™)
Order Number 1413.5135.02
TD-SCDMA Enhanced BS/MS tests (WinIQSIM2™)
Order Number 1414.6587.02
Cellular IoT Release 15/16/17 (WinIQSIM2™)
Order Number 1413.5387.02
TETRA Release 2 (WinIQSIM2™)
Order Number 1413.4139.02
IEEE 802.11a/b/g/n/j/p
Order Number 1413.5635.02
IEEE 802.11ac
Order Number 1414.3259.02
IEEE 802.11ax
Order Number 1413.6677.02
IEEE 802.11be
Order Number 1414.1333.02
IEEE 802.11ad
Order Number 1434.8191.02
IEEE 802.11ay
Order Number 1413.9160.02
DFS signal generation (Option for R&S®Pulse Sequencer software DFS)
Software option for standard-compliant dynamic frequency selection radar profiles.
Order Number 1413.4239.02
Bluetooth® EDR
Order Number 1414.3336.02
Bluetooth® 5.x
Order Number 1434.8279.02
Bluetooth® 6.0
Order Number 1413.6619.02
NFC A/B/F
Order Number 1414.6464.02
LoRa®
Order Number 1414.1985.02
OFDM Signal Generation
Order Number 1434.8433.02
IEEE 802.15.4 OQPSK, including support for 802.15.4ab (NB)
Order Number 1414.6912.02
HRP UWB
Order Number 1413.5187.02
IEEE 802.11a/b/g/n/j/p (WinIQSIM2™)
Order Number 1413.5687.02
IEEE 802.11ac (WinIQSIM2™)
Order Number 1414.3294.02
IEEE 802.11ax (WinIQSIM2™)
Order Number 1413.6683.02
IEEE 802.11be (WinIQSIM2™)
Order Number 1414.1385.02
IEEE 802.11ad (WinIQSIM2™)
Order Number 1434.8210.02
IEEE 802.11ay (WinIQSIM2™)
Order Number 1413.5287.02
Bluetooth® EDR (WinIQSIM2™)
Order Number 1414.3371.02
Bluetooth® 5.x (WinIQSIM2™)
Order Number 1434.8291.02
Bluetooth ® 6.0 (WinIQSIM2™)
Order Number 1413.6654.02
NFC A/B/F (WinIQSIM2™)
Order Number 1414.6441.02
LoRa® (WinIQSIM2™)
Order Number 1434.8456.02
IEEE 802.15.4 OQPSK, including support for 802.15.4ab (NB) (WinIQSIM2™)
Order Number 1414.6958.02
HRP UWB (WinIQSIM2™)
Order Number 3636.0434.02
OFDM Signal Generation (WinIQSIM2™)
Order Number 1414.1485.02
Glonass
Adds G1 SPS, G2 SPS
Order Number 1413.3832.02
GPS
Adds L1 C/A, L2 C/A, L1P, L2P
Order Number 1414.1533.02
Modernized GPS
Adds L2C, L5
Order Number 1413.4380.02
Galileo
Adds E1 OS, E5a/E5b
Order Number 1414.6258.02
NavIC/IRNSS, Adds NavIC L5
Order Number 1414.1585.02
BeiDou
Adds B1I, B2I
Order Number 1414.2923.02
QZSS/SBAS
Adds QZSS, EGNOS, WAAS, MSAS and GAGAN
Order Number 1414.2975.02
Real World Scenarios
Adds obscuration, multipath, antenna patterns
Order Number 1414.3013.02
GNSS Real Time Interfaces (RT remote control)
Adds HiL/ViL integration capabilities
Order Number 1413.3310.02
Modernized Glonass
Adds CDMA signals L1OC, L2OC and L3OC
Order Number 1414.6606.02
Modernized BeiDou
Order Number 1414.6770.02
Upgrade to Dual-Frequency GNSS
Adds combined L1/L2, L1/L5 or L2/L5 scenarios
Order Number 1414.6793.02
Upgrade to Triple-Frequency GNSS
Adds combined L1/L2/L5 scenarios
Order Number 1414.6812.02
Add 6 GNSS channels
Adds GNSS channels to the instrument
Order Number 1414.6835.02
Add 12 GNSS channels
Adds GNSS channels to the instrument
Order Number 1414.6858.02
Add 24 GNSS channels
Adds GNSS channels to the instrument
Order Number 1414.6935.02
Add 48 GNSS channels
Adds GNSS channels to the instrument
Order Number 1414.2800.02
ERA-Glonass Test Suite
According to GOST-R-55534/33471
Order Number 1414.2846.02
eCall Test Suite
According to EU2017/79, Annex VI and UNECE 2016/07
Order Number 1414.6406.02
GNSS Test Suite
Order Number 1434.8179.02
Car navigation test suite
Order Number 1413.4880.02
GPS, 1 Satellite (WinIQSIM2™)
Single-satellite waveform
Order Number 1414.3171.02
Modernized GPS, 1Satellite (WinIQSIM2™)
Order Number 1413.7015.02
Galileo, 1 Satellite (WinIQSIM2™)
Single-satellite waveform
Order Number 1413.7067.02
Glonass, 1 Satellite (WinIQSIM2™)
Single-satellite waveform
Order Number 1414.6287.02
NavIC/IRNSS, 1 Satellite (WinIQSIM2), Single-satellite waveform
Order Number 1413.7115.02
BeiDou 1 Satellite (WinIQSIM2™)
Single-satellite waveform
Order Number 1414.6629.02
Modernized BeiDou, 1 satellite (WinIQSIM2™)
Order Number 1413.8805.02
Pulse sequencing (option for R&S®Pulse Sequencer software)
Basic feature set for simulating radar signals on an external PC with R&S®Pulse Sequencer software.
Order Number 1413.9776.02
Enhanced pulse sequencing (option for R&S®Pulse Sequencer software)
Adds simulation capabilities for emitters and receiver, including antenna patterns and antenna scans
Order Number 1413.8857.02
Radar platforms (option for R&S®Pulse Sequencer software)
Adds simulation capabilities for radar platforms with more than one emitter.
Order Number 1413.8957.02
Moving emitters and receiver (option for R&S®Pulse Sequencer software)
Adds simulation capabilities for moving emitters and receiver.
Order Number 1413.9053.02
Multiple emitters (option for R&S®Pulse Sequencer software)
Adds simulation capability for interleaved emitters.
Order Number 1414.1433.02
Direction finding (option for R&S®Pulse Sequencer software)
Adds simulation capabilities for angle of arrival (AoA)
Order Number 1414.6706.02
Import 2D maps (option for R&S®Pulse Sequencer software)
Adds simulation capabilities including 2D background maps
Order Number 1414.6529.02
Pulse-on-pulse simulation (option for R&S Pulse Sequencer software)
Adds simulation capabilities for multiple emitters in combination with additional R&S®SMW-B15 baseband generators without dropping pulses. (pulse on pulse, pulse on CW)
Order Number 1414.1833.02
Radar Echo Generation
Order Number 1413.6090.02
DVB-H/DVB-T
Order Number 1413.6190.02
DVB-H (WinIQSIM2™)
Order Number 1413.6248.02
DAB/T-DMB (WinIQSIM2™)
Order Number 1414.2630.02
DVB-S2/DVB-S2X
Order Number 1413.8686.02
DVB-S2X Annex E
Order Number 1434.9100.02
DVB-S2/S2X Annex-M
Order Number 1413.8711.02
DVB-RCS2
Order Number 1414.3788.02
OneWeb User-Defined Signal Generation
Order Number 1414.2681.02
DVB-S2/DVB-S2X (WinIQSIM2™)
Order Number 1413.9076.02
DVB-S2X Annex E (WinIQSIM2™)
Order Number 1434.9123.02
DVB-S2/S2X Annex-M (WinIQSIM2™)
Order Number 1413.9130.02
DVB-RCS2 (WinIQSIM2™)
Order Number 1414.3820.02
OneWeb User-Defined Signal Generation (WinIQSIM2™)
Order Number 1414.3742.02
OneWeb Reference Signals
Order Number 1414.6870.71
1 waveform for signals from R&S®WinIQSIM2™, R&S®PulseSequencer, R&S®PulseSequencer (DFS)
Order Number 1414.6870.72
5 waveforms for signals from R&S®WinIQSIM2™, R&S®PulseSequencer, R&S®PulseSequencer (DFS)
Order Number 1414.6870.75
50 waveforms for signals from R&S®WinIQSIM2™, R&S®PulseSequencer, R&S®PulseSequencer (DFS)
Order Number 1413.4280.02
Multicarrier CW Signal Generation
Order Number 1413.3484.02
Additive White Gaussian Noise (AWGN)
Order Number 1413.5335.02
Multicarrier CW Signal Generation (WinIQSIM2™)
Order Number 1413.6460.02
Additive White Gaussian Noise (AWGN) with WinIQSIM2™
Order Number 1414.6341.02
Enhanced noise generation, phase noise, pulse noise, R&S®SMW-K62 required (software license)
Order Number 1414.6364.02
Notched signals for noise power ratio measurements, R&S®SMW-B9/B10 required (software license)
Order Number 1413.9876.02
Baseband Power Sweep
Order Number 1414.1885.02
Solid State Drive
Order Number 1175.3033.00
19" rack adapter for mounting a 19" housing 4 RU high in a standard 19" rack
Order Number 6124.2531.00
USB serial adapter for RS-232 remote control
Order Number 3641.2948.03
Cable for HS digital I/Q interface, 3 m
Order Number 1414.6893.02
HUMS
Health and Utilization Monitoring Service
Order Number 0240.2193.09
Documentation of calibration values
Order Number 1438.8150.02
Produtos relacionados
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found
Termos e condições do sorteio de prêmios: 10 anos dos osciloscópios da Rohde & Schwarz
1. O sorteio de prêmios “10 anos dos osciloscópios da Rohde & Schwarz” (no presente, referido como “Sorteio”) é organizado pela Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munique, Alemanha, tel. +49 89 41 29 0 (doravante referida como “R&S”).
2. Todos os participantes podem se inscrever durante o período de 1º de janeiro de 2020 a 31 de dezembro de 2020, informando seu nome, nome da empresa e e-mail comercial.
3. A participação é gratuita e não depende da compra de mercadorias ou serviços.
4. O sorteio está aberto somente a pessoas jurídicas e apenas às pessoas jurídicas que possam ganhar os prêmios. Pessoas físicas não poderão participar em nome e interesse próprios, mas como representantes de uma pessoa jurídica, devendo preencher a ficha de participação em nome e segundo o interesse da pessoa jurídica.
5. Os prêmios a serem entregues são 1 de 10 R&S®RTB2000, no período de 1º de janeiro de 2020 a 31 de dezembro de 2020:
Prêmio: 1 osciloscópio digital R&S®RTB2000
6. O sorteio ocorrerá na sede da R&S, em Munique, à Muehldorstrasse 15, 81671. O ganhador dos prêmios será avisado por e-mail no prazo de cinco (5) dias úteis.
7. O representante autorizado da pessoa jurídica informará à R&S sobre a aceitação do preço. Caso a aceitação seja negada ou se não houver resposta em até duas (2) semanas, um novo ganhador será sorteado. Se não for possível definir um ganhador no prazo de quatro (4) semanas, o sorteio se encerrará e o prêmio prescreverá.
8. Aos funcionários da R&S e seus familiares, bem como às pessoas familiarizadas com o processo do sorteio e seus familiares, é vetado o preenchimento da ficha de participação.
9. Não são permitidos equivalente em dinheiro ou troca de prêmios. Os prêmios são intransferíveis. Todos os impostos, tributos, encargos, taxas e outras cobranças tributáveis no país do participante serão arcadas pelo participante.
10. Dados pessoais somente serão processados para os fins deste sorteio e excluídos quatro (4) semanas após o sorteio, se não acordado de outro modo.
11. O participante que não cumprir os presentes Termos e Condições estará sujeito à desclassificação pela R&S da participação neste concurso. Neste caso, os prêmios também poderão ser retirados retroativamente. Se um prêmio estiver sujeito à retirada retrospectiva por motivo de incumprimento dos presentes Termos e Condições, ele deverá ser devolvido pelo respectivo participante, às suas expensas, para o endereço da R&S mencionado na disposição N.1, e um novo ganhador será sorteado.
12. Os participantes não podem reivindicar os prêmios do sorteio e não são autorizados recursos legais neste sentido.
13. O sorteio e a relação contratual decorrente, entre a R&S e o respectivo participante, serão regidos e interpretados de acordo com as leis da Alemanha, sem dar efeito ao princípio do conflito de leis. Os tribunais de Munique, Alemanha, gozarão de jurisdição exclusiva em caso de disputa decorrente, direta ou indiretamente, da participação neste concurso.
* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.
