May 23, 2023 | Пресс-релиз | Test & measurement

The R&S SMW200A and R&S SMM100A vector signal generators and the R&S FSW and R&S FPS signal and spectrum analyzers from Rohde & Schwarz have been approved by Qualcomm for testing the Qualcomm® QRU100 5G RAN Platform – an O-RAN compliant solution with architecture flexibility designed to facilitate scalable and cost-effective 5G network deployments. OEMs providing RUs for Open RAN infrastructure adopting the Qualcomm QRU100 5G RAN Platform can be confident that these Rohde & Schwarz solutions meet the necessary sub-6 GHz test requirements for design verification and production.

Feb 27, 2025 | Пресс-релиз | UWB

NXP Semiconductors, an innovator and supplier of Ultra-Wideband (UWB) solutions, and Rohde & Schwarz collaborate to demonstrate a test setup for UWB radar target simulation at the upcoming Mobile World Congress in Barcelona. The demonstration, being the first of its kind, verifies the unique performance of the NXP Trimension™ NCJ29D6A chipset including the enhanced radar algorithms. It is capable of generating UWB radar targets with a variable target distance down to a few centimeters, enabling maximum control and reproducibility of the simulated scenario.

Feb 15, 2024 | Пресс-релиз | MWC2024

In the evolving landscape of 5G networks, leveraging frequency ranges FR1 (0.41 to 7.125 GHz) and FR2 (24.25 to 71 GHz) has been pivotal. As the era of 5G-Advanced and 6G unfolds, a third frequency range is being discussed in global regulatory and industry consortiums worldwide. FR3, which is also known as upper-midband, spanning 7.125 to 24.25 GHz, will open a new frontier for mobile communication technology. Rohde & Schwarz technology plays a key role in enabling Qualcomm Technologies to show the readiness and effectiveness of the latest RF modem technology for FR3.

Jan 04, 2024 | Пресс-релиз | Automotive

Analog Devices, Inc. (ADI) and Rohde & Schwarz are helping the automotive industry to adopt wireless battery management system (wBMS) technology which brings technical, environmental, and cost advantages compared with wired battery management systems (BMS). A new automated test solution is tailored for verification and mass production tests of wireless device tests. This development builds on existing efforts for wBMS RF robustness testing.

Oct 30, 2023 | Пресс-релиз | Wireless communications

With research on the technological components of the future 6G wireless communication standard in full swing, the possibilities of an AI-native air interface for 6G are also being explored. In collaboration with NVIDIA, Rohde & Schwarz takes another step forward and presents an enhancement to its recent hardware-in-the-loop demonstration of a neural receiver, showing the achievable performance gains when using trained ML models compared to traditional signal processing — while for the first time also optimizing the transmitter side.

Feb 19, 2025 | Пресс-релиз | Test & measurement

Kyocera has developed an innovative mmWave phased array antenna module (PAAM) that simultaneously creates multiple beams in different directions at different frequencies. These PAAMs will be used in 5G FR2 infrastructure installations, enabling for example site co-location of different operators running networks on different frequency bands. To ensure optimal beam steering and beam directivity of their groundbreaking product, Kyocera relies on CATR-based multi-reflector OTA testing technology from Rohde & Schwarz.

Mar 03, 2025 | Пресс-релиз | Test & measurement

Murata Manufacturing is launching the world’s first Digital Envelope Tracking (Digital ET) technology. This advanced technology has the potential to considerably reduce power consumption of advanced RF circuits for 5G and future 6G devices, contributing towards more energy efficiency in various applications. Rohde & Schwarz and Murata have combined their technology and expertise to develop a sophisticated RF measurement setup that demonstrates the capabilities of this novel Digital ET technology.

Sep 03, 2024 | Пресс-релиз | Test & measurement

Premier microwave, RF, wireless and radar players gather in the city of light for the European Microwave Week (EuMW). Industry-leading T&M specialist Rohde & Schwarz will present a radiating portfolio of products and solutions in Paris for various application fields, pushing the limits in the Gigahertz to Terahertz frequency ranges.

Apr 12, 2022 | Пресс-релиз | Test & measurement

Error vector magnitude (EVM) is one of the main parameters to characterize the performance of a digital transmitter or receiver. The well-established R&S FSW signal and spectrum analyzer from Rohde & Schwarz has been the leading instrument for high-end measurements requiring extreme precision. Its new front end continues the path of innovation with unrivaled EVM measurement accuracy for wideband modulated signals in the mmWave range. This makes the solution ideal for testing any high-end communication component or systems, including 5G NR FR2 or IEEE 802.11ay / ad chipsets, amplifiers, user equipment and base stations.

Sep 10, 2020 | Пресс-релиз | Test & measurement

With the new R&S FSW-B8001 option, the well-established R&S FSW high-end signal and spectrum analyzer now supports an industry-leading 8.3 GHz internal analysis bandwidth, offering unequaled dynamic range and sensitivity. Design engineers developing latest radar and wireless communications technologies as well as future satellite systems will benefit significantly from the extended bandwidth available in a one-box solution.

Mar 16, 2020 | Пресс-релиз | Wireless communications

Rohde & Schwarz is paving the way for research in the terahertz frequency range by demonstrating multi gigabit data transmission in the D-Band at 140 GHz. The setup features the R&S FSW high-end signal and spectrum analyzer equipped with an R&S FSW-B8001 option, supporting an unparalleled 8.3 GHz internal analysis bandwidth. This new hardware option will be available soon from Rohde & Schwarz.

Mar 13, 2023 | Пресс-релиз | Test & measurement

Rohde & Schwarz will showcase an end-to-end test infrastructure featuring its R&S SMW200A vector signal generator and R&S FSW signal and spectrum analyzer together with SatixFy’s Sx3099 modem ASIC demonstrating DVB-S2X Annex E wide bandwidth beam hopping and high bit rate DVB-RCS2 transmission.

Sep 22, 2022 | Пресс-релиз | Wireless communications

Rohde & Schwarz presents an innovative signal generation and analysis solution for measurements in the D band that will significantly simplify early next generation mobile communications research. The new R&S FE170 frontend extensions are easy to mount to and configure with the R&S SMW200A vector signal generator and the R&S FSW signal and spectrum analyzer. The extensions will allow the two high-end test instruments to cover frequency ranges between 110 GHz and 170 GHz – key spectrum for beyond 5G, for 6G technology and for future automotive radar applications.

Aug 03, 2022 | Пресс-релиз | Wireless communications

The latest features included in 5G NR Release 17 are set to improve system performance and enable expansion into new applications. To address testing challenges in these latest demanding 5G standards, Rohde & Schwarz has introduced a comprehensive set of coordinated software options for its vector signal generators and signal and spectrum analyzers.

Jun 06, 2022 | Пресс-релиз | Test & measurement

At the International Microwave Symposium IMS2022, Rohde & Schwarz will showcase new EVM optimization techniques for 5G FR2, 6G D-Band component test, the latest Over-the-Air (OTA) test chamber, and many additional new products.

May 02, 2017 | Пресс-релиз | Test & measurement

The IEEE 802.11p standard is one of the main candidates for vehicle-to-everything (V2X) communications. Rohde & Schwarz T&M equipment enables semiconductor manufacturer Renesas to provide first class communications solutions for the 11p market.

Dec 08, 2021 | Пресс-релиз | Wireless communications

As 5G networks are being rolled out globally, the evolution of the 5G NR standard continues. With Release 17, 3GPP will extend the frequency support of 5G NR mmWave bands into the unlicensed spectrum up to 71 GHz, a frequency band traditionally used by non-cellular standards like IEEE 802.11ad and 11ay. To address new testing challenges related to this bandwidth extension and to evaluate the performance of the latest generation RF transceiver chipsets, Rohde & Schwarz and Sivers Semiconductors teamed up to test RF transceivers for 5G NR up to 71 GHz.

Jun 13, 2024 | Пресс-релиз | THz communication

Rohde & Schwarz is advancing its pioneering sub-THz research in the D-Band and has reached important milestones. In collaboration with the Berkeley Wireless Research Center (BWRC), the test and measurement expert has successfully characterized a TX/RX multi-antenna chip (CHARM) operating at up to 140 GHz, using their D-Band over-the-air (OTA) test chamber. Academia and industry leaders agree that the 110 GHz to 170 GHz frequency range, known as D-Band, is critical for beyond 5G and 6G mobile communications and future automotive radar applications.

Nov 09, 2020 | Пресс-релиз | Test & measurement for ADS

Rohde & Schwarz Benelux to provide signal and spectrum analyzing and recording solutions for the Netherlands’ Defence Material Organization TESLA-M project.

Feb 12, 2025 | Пресс-релиз | Multi-Domain

Rohde & Schwarz showcases its latest cutting-edge defense solutions at IDEX 2025, empowering true spectrum dominance for operational scenarios in all domains and along the complete signal chain.

Sep 06, 2022 | Пресс-релиз | Test & measurement

After 20 years, European Microwave Week – Europe's premier microwave, RF, wireless and radar event – is returning to Milan, Italy. At the event’s exhibition, test and measurement expert Rohde & Schwarz will showcase the company’s latest testing capabilities for microwave components with a special focus on new solutions for the road to 6G. Visitors will also learn about testing for automotive as well as aerospace and defense applications.

Apr 15, 2025 | Пресс-релиз | Test & measurement for ADS

State-of-the-art signal generators, spectrum and signal analyzers are key measuring tools to ensure optimal performance of next-generation Low Earth Orbit (LEO) satellite networks. Rohde & Schwarz advanced measuring technology plays a key role in modeling and evaluating performance of the Telesat Lightspeed integrated space and terrestrial network.

Aug 17, 2022 | Пресс-релиз | Test & measurement

The Auray O-RAN Testing and Integration Centre (OTIC) and Security Lab provides test, validation and integration services to a supply chain of open radio access network vendors. In their first successful certification of an O-RAN radio unit (O-RU) according to O-RAN ALLIANCE as part of the O-RAN Certification and Badging Program, Auray OTIC relied on the integrated solution for O-RU conformance testing by Rohde & Schwarz and VIAVI.

Nov 27, 2018 | Пресс-релиз | Test & measurement

NTT DOCOMO INC. and Rohde & Schwarz have joined forces to set up the world's first ultra-wideband channel sounder for mobile communications exceeding 100 GHz. They conducted radio wave propagation experiments at frequencies up to 150 GHz. The frequency bands from 100 GHz to 300 GHz are expected to enable further high-speed and large-capacity communication for the next generation beyond 5G.

Sep 25, 2020 | Пресс-релиз | Test & measurement for ADS

In order to reduce complexity, costs and efforts for TRM testing, Rohde & Schwarz concentrates on test and measurement solutions to maximize the performance of AESA designs with highest precision instruments and automation of complex test scenarios.

Feb 24, 2021 | Пресс-релиз | Wireless communications

In times when many trade shows and congresses are cancelled, postponed or have shifted to virtual formats, MWC Shanghai 2021 is the first show of the GSMA MWC series to return as a physical event in February 2021. Test and measurement specialist Rohde & Schwarz participates and demonstrates its market-leading solutions for mobile devices, chipsets, infrastructure and networks live at the Shanghai New International Expo Center (SNIEC).

Oct 26, 2022 | Пресс-релиз | Test & measurement

To further exploit the huge potential of 5G, the wireless industry has continued to develop the standard up to Release 16, and development continues. But technology does not stand still, and even as 5G presses forward, a new generation of cellular technology is emerging. Cutting-edge 6G research is already underway at communications equipment manufacturers and research institutions, and reconfigurable intelligent surfaces (RIS) is a major area of interest in 6G research. Rohde & Schwarz, with Tsinghua University and Actenna Technology, recently completed an evaluation and trial of RIS technology to comprehensively evaluate the effects and performance of RIS deployment.

Nov 06, 2019 | Пресс-релиз | Wireless communications

While the new 5G technology is at the first stages of rollout, Rohde & Schwarz, the Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute, HHI and the Fraunhofer Institute for Applied Solid State Physics IAF are taking a step further with demonstrations in the terahertz (THz) frequency band, related to the 6th generation wireless mobile communication (6G). The collaboration has resulted in a wireless transmit and receive system operating between 270 and 320 GHz, with further frequency extensions for potential 6G bands already in preparation.

Jun 23, 2021 | Пресс-релиз | Wireless communications

Radio access network (RAN) landscapes deploy various kinds of infrastructure equipment, ranging from macro to small cell base stations. Evolving 5G NR technology in particular makes infrastructure equipment testing challenging due to increasing MIMO complexity and beamforming, wider bandwidths and new spectrum bands up to the mmWave range. Mobile World Congress is returning to Barcelona in June 2021, and Rohde & Schwarz will be showcasing its latest class-leading mobile network infrastructure testing solutions, which address various needs and enable the mobile industry to leverage the opportunities of 5G.

May 27, 2025 | Пресс-релиз

Kyocera has developed an innovative mmWave phased array antenna module (PAAM) that simultaneously creates multiple beams in different directions at different frequencies. These PAAMs can enable a wide range of 5G FR2 infrastructure installations, including site co-location of different operators running networks on different frequency bands, as well as critical infrastructure threat-sensing, homeland security, and other high-reliability applications. To ensure optimal beam steering and beam directivity of its groundbreaking product, Kyocera relies on CATR-based multi-reflector Over-the-Air (OTA) testing technology from Rohde & Schwarz.