R&S®UMS400 Universal monitoring system

R&S®UMS400 Universal monitoring system
Afficher plus de détails
R&S®UMS400 Universal monitoring system
Afficher plus de détails
R&S®UMS400 Universal monitoring system
Afficher plus de détails
R&S®UMS400 Universal monitoring system
Afficher plus de détails

Key Facts

  • Monitoring and TDOA from 8 kHz to 8 GHz (up to 53 GHz with R&S®CS-MC20 and R&S®CS-MC53)
  • AoA direction finding from 9 MHz to 8 GHz (depending on DF antenna)
  • Compact outdoor housing with integrated PC, hard disk and wireless connectivity
  • Signal measurements in line with ITU Recommendations (optional)
  • Streaming of I/Q data (optional) with up to 40 MHz real-time bandwidth

Outdoor spectrum monitoring and radiolocation solution

The R&S®UMS400 universal monitoring system can be used for spectrum monitoring and radiolocation from 8 kHz to 8 GHz and can be extended up to 20 GHz with the R&S®CS-MC20 microwave converter and further up to 53 GHz via the R&S®CS-MC53 microwave converter. Typically, monitoring at such high frequencies requires the sensor to be installed close to the antenna(s) in order to keep cable losses at a minimum for highest sensitivity. Thanks to their outdoor housing, this is perfectly possible for the R&S®UMS400, R&S®CS-MC20, and the R&S®CS-MC53.

Caractéristiques & avantages

Frequency range extension

The frequency range of the R&S®UMS400 can be extended up to 20 GHz

The frequency range of the R&S®UMS400 can be extended up to 20 GHz with the R&S®CS-MC20 microwave converter. The compact outdoor housing means the R&S®CS-MC20 can be installed together with the R&S®UMS400 using the R&S®CS-OMK outdoor mounting kit.

Support of radiolocation

The R&S®UMS400 supports the time difference of arrival (TDOA) and angle of arrival (AoA) radiolocation as option

The R&S®UMS400 and the R&S®CS-TSA timestamp accuracy option support accurate radiolocation with the time difference on arrival (TDOA) method in combination with R&S®ARGUS spectrum monitoring software.
The R&S®UMS400 can be upgraded to direction finding (DF) with the R&S®CS-DF direction finding option in combination with an Rohde & Schwarz DF antenna (see product brochure for details).

Support of wideband signals

Monitoring and streaming of I/Q data (optional) with a real-time bandwidth of 40 MHz

The R&S®UMS400 supports the demodulation of signals with a bandwidth up to 40 MHz. Streaming of I/Q data is available by means of the R&S®CS-U10G 10G Ethernet interface as option.

Compliant signal measurements

The R&S®UMS400 supports the measurement of signals in line with ITU Recommendations

The R&S®UMS400 supports signal measurements in line with ITU Recommendations and can be integrated into monitoring systems running the R&S®ARGUS spectrum monitoring software or other control software easily thanks to its open interface.

Integrated antenna switch

The R&S®UMS400 features an antenna switch for two monitoring antennas

Both antenna connectors can be equipped with an R&S®CS-UDC DC feed to directly support active antennas.
When used with the R&S®CS-MC20 microwave downconverter, it occupies one of the antenna connectors.

Available models

Available models
Modèles
Description

R&S®UMS400

Numéro de commande 4501.9001.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4501.9001.02 a été copié dans votre presse-papiers.
Description
Universal monitoring and TDOA system with Windows as operating system (frequency range from 8 kHz to 8 GHz and 40 MHz real-time bandwidth)

Available options

Hardware options
Produit
Désignation
R&S®CS-UDC

Numéro de commande 4502.0408.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4502.0408.02 a été copié dans votre presse-papiers.
Désignation

DC feed for R&S®UMS400

DC feed for active antennas

R&S®CS-U10G

Numéro de commande 4502.0508.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4502.0508.02 a été copié dans votre presse-papiers.
Désignation

10G Ethernet interface for R&S®UMS400

10G Ethernet interface

R&S®CS-UM2

Numéro de commande 4502.0308.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4502.0308.02 a été copié dans votre presse-papiers.
Désignation

Wireless modem for R&S®UMS400

Wireless modem, support of LTE-FDD, LTE-TDD and HSPA+

R&S®CS-UM3

Numéro de commande 4502.0308.03

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4502.0308.03 a été copié dans votre presse-papiers.
Désignation

Wireless modem for R&S®UMS400

Wireless modem, support of LTE-FDD, LTE-TDD, HSPA+ and TD-SCDMA

Software options
Produit
Désignation
R&S®CS-PS

Numéro de commande 4500.7070.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4500.7070.02 a été copié dans votre presse-papiers.
Désignation

Panorama scan

Fast spectrum/monitoring scan over the entire frequency range

R&S®CS-PC

Numéro de commande 4500.7040.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4500.7040.02 a été copié dans votre presse-papiers.
Désignation

Polychrome spectrum

Display of signal level occurence in a color-coded spectrum

R&S®CS-TSA

Numéro de commande 4500.7170.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4500.7170.02 a été copié dans votre presse-papiers.
Désignation

Timestamp accuracy

Accurate timestamps and external GNSS support

R&S®CS-DF

Numéro de commande 4500.7370.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4500.7370.02 a été copié dans votre presse-papiers.
Désignation

Direction finding upgrade

Direction finding for all signals within the real-time bandwidth

R&S®CS-SPM

Numéro de commande 4500.7311.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4500.7311.02 a été copié dans votre presse-papiers.
Désignation

Spectral measurement

Occupied bandwidth and channel power measurements in line with ITU recommendations  

R&S®CS-MM

Numéro de commande 4500.7340.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4500.7340.02 a été copié dans votre presse-papiers.
Désignation

Modulation measurement

Analog modulation measurements in line with ITU recommendations

R&S®CS-FS

Numéro de commande 4500.7211.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4500.7211.02 a été copié dans votre presse-papiers.
Désignation

Field strength measurement

Field strength measurements in line with ITU recommendations

R&S®CS-ZS

Numéro de commande 4500.7111.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4500.7111.02 a été copié dans votre presse-papiers.
Désignation

Time domain measurement

Simultaneous frequency and time domain analysis

R&S®CS-IQ

Numéro de commande 4500.7270.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4500.7270.02 a été copié dans votre presse-papiers.
Désignation

IQ snapshot record, replay & analysis

Record, replay, and analysis of IQ data up to 40 MHz from internal memory

R&S®CS-IR

Numéro de commande 4500.7240.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4500.7240.02 a été copié dans votre presse-papiers.
Désignation

Trace recording and replay

Recording and replay of spectrum traces, measurement results and audio 

R&S®CS-MAP

Numéro de commande 4500.7140.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4500.7140.02 a été copié dans votre presse-papiers.
Désignation

Mapping and geotagging

Display of measurement results on a map

R&S®CS-IA

Numéro de commande 4500.7392.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4500.7392.02 a été copié dans votre presse-papiers.
Désignation

Interference analysis

Automatic detection of harmonics and intermodulation products

Direction finding antennas
Produit
Désignation

Numéro de commande 4096.0002.07

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4096.0002.07 a été copié dans votre presse-papiers.
Désignation

Compact UHF/SHF DF antenna

600 MHz to 6 GHz; vertical polarization; for installation on a vehicle roof or tripod; passive antenna elements

Numéro de commande 4096.0002.17

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4096.0002.17 a été copié dans votre presse-papiers.
Désignation

Compact passive UHF/SHF DF antenna

600 MHz to 6 GHz; vertical polarization; for installation on a vehicle roof or tripod; entirely passive from 600 MHz to 2.9 GHz

Numéro de commande 4098.2002.07

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4098.2002.07 a été copié dans votre presse-papiers.
Désignation

Collapsible VHF/UHF DF antenna

20 MHz to 690 MHz; vertical polarization; for installation on a tripod or portable mast; active antenna elements

Numéro de commande 4111.4009.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4111.4009.02 a été copié dans votre presse-papiers.
Désignation

Direction finding and monitoring antenna

Integrated high-performance antenna system for single-channel direction finders, frequency range from 20 MHz to 8.5 GHz (vertical polarization)

Mast adapter
Produit
Désignation
R&S®UMS12-H1

Numéro de commande 3035.1154.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 3035.1154.02 a été copié dans votre presse-papiers.
Désignation

Mast stand

Base Mast with tripod (height: 1.7 m)

R&S®UMS12-H2

Numéro de commande 3035.1160.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 3035.1160.02 a été copié dans votre presse-papiers.
Désignation

Antenna extension arm for R&S®UMS120 systems

R&S®CS-AMK

Numéro de commande 4502.0837.00

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4502.0837.00 a été copié dans votre presse-papiers.
Désignation

Antenna mounting kit for R&S®HE600 and HF907OM

R&S®CS-OMK

Numéro de commande 4502.0720.02

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4502.0720.02 a été copié dans votre presse-papiers.
Désignation

Outdoor mounting kit

integrated brackets for R&S®UMS400, CS-MC20 downconverter and UMS30-H1 power supply

R&S®CS-MK

Numéro de commande 4502.1110.00

Cliquer sur le No. de commande afin de copier.
Numéro de commande 4502.1110.00 a été copié dans votre presse-papiers.
Désignation

Mounting kit

two clamps to install R&S®UMS400 to a mast

Demander des informations

Vous avez des questions ou besoin d'informations supplémentaires ? Remplissez simplement ce formulaire et nous vous recontacterons rapidement.

Marketing de permission

Votre demande a bien été envoyée ! Nous vous contacterons dans les plus brefs délais.
An error is occurred, please try it again later.