R&S®ENV4200 A four-line V-network

RFI voltage measurements at high currents

R&S®ENV4200 A four-line V-network
Afficher plus de détails
R&S®ENV4200 A four-line V-network
Afficher plus de détails
R&S®ENV4200 A four-line V-network
Afficher plus de détails
R&S®ENV4200 A four-line V-network
Afficher plus de détails
R&S®ENV4200 A four-line V-network
Afficher plus de détails
R&S®ENV4200 A four-line V-network
Afficher plus de détails

Key Facts

  • Frequency range 150 kHz to 30 MHz
  • Power handling capacity up to 200 A, constant current
  • Simulated impedance 50 μH || 50 Ω in line with CISPR 16-1-2
  • RFI voltage measurements in line with CISPR, EN, VDE, ANSI and FCC Part 15
  • Calibrated in line with CISPR 16-1-2

RFI voltage measurements at high currents

The R&S®ENV4200 200 A four-line V-network meets CISPR 16‑1‑2, EN 55016-1-2, ANSI C63.4 and FCC Part 15 requirements for V-networks with an impedance of 50 μH || 50 Ω in the frequency range from 150 kHz to 30 MHz. The R&S®ENV4200 V-network measures RFI voltages on AC and DC supply connections for EUT carrying very high currents. The network has air-core inductances, an artificial hand and a pulse limiter.

Caractéristiques & avantages

Air-core inductance and artificial hand

Air-core design and artificial hand

The R&S®ENV4200 200 A four-line V-network uses air-core inductances and has an artificial hand to mimic the influence of the user’s hand when measuring disturbance voltage.

Attenuator

Built-in 10 dB attenuator pad

The R&S®ENV4200 200 A four-line V-network comes with a 10 dB attenuator pad to ensure standard impedance irrespective of the measuring receiver's input attenuation. 

Pulse limiter

Built-in pulse limiter (can be switched off)

A built-in pulse limiter that can be deactivated to protect measuring receiver input from high energy radio frequency interference pulses.

Temperature monitoring

Automatic temperature monitoring

When the temperature inside the housing reaches about +50°C, the fans of the R&S®ENV4200 automatically switch on. This protects the V-network in case of a high constant current load.

Remote control

Remote control with TTL levels (compatible with Rohde & Schwarz measuring receivers)

TTL control inputs  driven by controllers or Rohde & Schwarz measuring receivers are provided for the remote control of phase selection in an automatic test system. 

Available options

General
Produit
Désignation
R&S®EZ-21

Numéro de commande 1107.2087.03

Cliquer sur le No. de commande afin de copier.
Numéro de commande 1107.2087.03 a été copié dans votre presse-papiers.
Désignation

Control Cable, 3 m

from R&S®ESU/ESCI/ESPI/ESIB/ESxS/EPL1000 and FPL1000 to R&S®AMN6500/ENV216/ENV432/ENV4200

R&S®EZ-21

Numéro de commande 1107.2087.10

Cliquer sur le No. de commande afin de copier.
Numéro de commande 1107.2087.10 a été copié dans votre presse-papiers.
Désignation

Control Cable, 10 m

from R&S®ESU/ESCI/ESPI/ESIB/ESxS/EPL and FPL1000 to R&S®AMN6500/ENV216/ENV432/ENV4200 

R&S®EZ-29

Numéro de commande 1326.6470.03

Cliquer sur le No. de commande afin de copier.
Numéro de commande 1326.6470.03 a été copié dans votre presse-papiers.
Désignation

Control Cable, 3 m

ESW, ESR, ESRP, ESL, FSW/FSVx to ENVxxx

R&S®EZ-29

Numéro de commande 1326.6470.10

Cliquer sur le No. de commande afin de copier.
Numéro de commande 1326.6470.10 a été copié dans votre presse-papiers.
Désignation

Control Cable, 10 m

ESW, ESR, ESRP, ESL, FSW/FSVx to ENVxxx

Demander des informations

Vous avez des questions ou besoin d'informations supplémentaires ? Remplissez simplement ce formulaire et nous vous recontacterons rapidement.

Marketing de permission

Votre demande a bien été envoyée ! Nous vous contacterons dans les plus brefs délais.
An error is occurred, please try it again later.