ZN-Z15x automatic economy calibration units series up to 8.5 GHz: 2, 4 or 6 ports SMA(f), ZN-Z154 up to 24 ports, 2-port type N(f). ZN-Z156: 2 ports 67 GHz.

The R&S®ZNB vector network analyzer features a wide dynamic range, low trace noise and high output power and is targeted at applications in the electronic goods and mobile radio industries.

There are several reasons to characterize RF components under pulsed conditions. Often it is to prevent thermal damage to the device under test or to characterize it under operating conditions. Vector Network Analyzers offer integrated hardware and software for accurate device characterization under pulsed conditions. This hardware includes built-in pulse modulators, pulse generators and synchronization IO including for external device control.

The TDR option displays discontinuities, reflection factors or impedance versus delay/length.

Options for characterizing frequency-converting devices such as mixers, block upconverters and downconverters, T/R modules and others.

Series of automatic economy calibration units with frequencies up to 50 GHz. 2 and 4 port models available. ZN-Z51 has configurable test ports.

The FFT-based spectrum analysis function can be used to measure a DUT's spurious and harmonics, providing short sweep times along with high dynamic range and fine frequency resolution. It quickly detects undesired signal components (spurious) in converters and T/R modules. The marker-to-spectrumfunction directly gets to the root of problems in the event of unexpected S-parameter results, thus providing fast and extremely useful integrated diagnostics.

ZN-Z3x: Automatic recalibration without reconnecting calibration equipment. Supports TVAC, multiport and production systems. CAN bus network control. Up to 40 GHz.

The R&S®ZNLE is a cost-efficient benchtop vector network analyzer. The analyzer's excellent performance makes it ideal for education, development and production.

The R&S®ZNB3000 vector network analyzer is optimized for high-volume production and demanding applications, thanks to industry-leading measurement speed, stability and scalability.

The R&S®SMM100A - a vector signal generator for complex, digitally modulated signals for R&D and production up to 44 GHz.

The FSWX is the first signal and spectrum analyzer with multichannel spectrum analysis, cross-correlation (x-correlation) and I/Q preselection.

AMN for disturbance voltage measurements on single-phase EUTs

High-end EMI test receiver for compliance testing.

R&S®NTS makes for easy replacement of legacy thermistor mounts in microcalorimeter applications with analog, passive sensor design. It is designed for RF power traceability applications.

Ultrabroadband antenna for emission measurements and immunity tests in a wide frequency range from 30 MHz to 8000 MHz.

The new trendsetting product for calibrating and verifying mobile phones. A radical new approach for ultimate wireless device production lines.

Low speed serial buses such as I2C/SPI, RS-232/UART and Manchester/NRZ on your Rohde & Schwarz instrument. Your oscilloscope can provide a system-level view of one or more serial buses time correlated with other system events

FPL signal and spectrum analyzer - solid RF performance, low weight and a small footprint. Frequency range from 5 kHz to 3/7.5/14/26.5 GHz

The R&S®RTO, RTE and RTH oscilloscopes support triggering and decoding of the CAN flexible data rate. Explore the CAN-FD triggering & decoding software here.

R&S®RTO/RTE oscilloscopes support triggering and decoding of FlexRay buses, including FIBEX standard file import. Discover the FlexRay oscilloscope software.

Choose the R&S Manchester and NRZ oscilloscope software to trigger & decode any Manchester and NRZ coded serial protocol. Explore the features now.

All Rohde & Schwarz oscilloscopes support triggering and decoding of UART and of RS-232, RS-422 and RS-485 buses. Learn more about the software option here.

The R&S®RTO oscilloscopes enable debugging of USB-SSIC interfaces for gear 1 and 2. Explore the USB-SSIC triggering & decoding software here.

The option R&S RTP-K110 enables HDMI 1.4b/2.1 compliance testing on the R&S RTP oscilloscopes.

This option supports automated compliance testing for 100BASE-T, 1000BASE-T, 100BASE-T1 and 1000BASE-T1 Ethernet of options RTO-K22, RTO-K24, RTO-K87, RTP-K22, RTP-K24, RTP-K87, RTP-K98

Choose the R&S®RTH-K201 web interface remote control option to remote control & the R&S®Scope Rider from a web browser.

The R&S®RTP and R&S®RTO oscilloscope supports serial triggering and decoding of Automotive Ethernet BroadR-Reach or 100BASE-T1. Explore the features now.

The R&S®RTO and RTE oscilloscopes support triggering & decoding of clock extension peripheral interface buses. Explore the CXPI triggering & decoding software.

All Rohde & Schwarz oscilloscopes support triggering and decoding of I²C, of 2-wire, 3-wire and 4-wire SPI buses. Learn more about the I²C/SPI software here.