The R&S®BBA130 is the first tunable class A/AB broadband amplifier for the frequency range of 80 MHz to 6 GHz and rf output power up to 13000 W.

The R&S®SAM100 system amplifier - an ultra-broadband solid state microwave amplifier with outstanding linearity and very good noise characteristics in frequency range from 2 GHz to 20 GHz.

The R&S®Cable Rider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Learn more.

R&S®FSH handheld spectrum analyzer: the all-in-one handheld platform for installation and maintenance in the field. It has a frequency range from 9 kHz to 3.6/4/8/13.6/20 GHz. Models with and without an internal tracking generator and VSWR bridge are available.

The R&S®BBL200 is a liquide cooled broadband amplifier for high power application up to 10 kW P1dB in the frequency range of 9 kHz to 250 MHz.

R&S ® AREG100A Automotive Radar Echo Generator - Reliable and simple production testing of automotive radar sensors

The R&S®Spectrum Rider FPH – handheld spectrum analyzer, frequency range from 5 kHz up to 44 GHz.

R&S RS5400 radio server – aggregate and split voice streams to optimize bandwidth utilization to and from remotely controlled radio sites

The R&S®PKU100 outdoor solid-state power amplifier for Ku band uplink applications offers unmatched performance and efficiency in a compact form factor.

R&S®PKU100 solid-state power amplifiers for Ku band uplink applications have unmatched performance and efficiency in a compact form factor.

The R&S®TSMx drive and walk test scanner features optimization, troubleshooting and mobile coverage measurements with non-intrusive scanner measurements. Find out more.

The FFT-based spectrum analysis function can be used to measure a DUT's spurious and harmonics, providing short sweep times along with high dynamic range and fine frequency resolution. It quickly detects undesired signal components (spurious) in converters and T/R modules. The marker-to-spectrumfunction directly gets to the root of problems in the event of unexpected S-parameter results, thus providing fast and extremely useful integrated diagnostics.

VNA Source Phase Control Options for characterization of devices requiring a defined phase such as differential amplifiers, mixers, IQ mixers and others.

Noise figure measurement with vector network analyzers

Options for characterizing frequency-converting devices such as mixers, block upconverters and downconverters, T/R modules and others.

The R&S®ZCxxx millimeterwave converters allow millimeterwave measurements in the frequency range up to 1.1 THz.

Switch matrix - configurable switch matrix for up to 48 network analyzer ports, up to 26.5 GHz.

Series of automatic economy calibration units with frequencies up to 50 GHz. 2 and 4 port models available. ZN-Z51 has configurable test ports.

ZV-Z5x series of automatic economy calibration units. Upper frequency ranging from 3 GHz (2 ports, 75 Ω) to 8 GHz (8 ports), 20 GHz (6 ports)

R&S®ZN-Z1Exx economy calibration units from 5 kHz to 26.5 GHz. Two configurable ports: 3.5 mm-compatible or N-type. Further configurable as m or f.

The R&S®ZNB vector network analyzer features a wide dynamic range, low trace noise and high output power and is targeted at applications in the electronic goods and mobile radio industries.

Millimeterwave receiver modules for antenna test systems with highest dynamic range.

ZN-Z15x automatic economy calibration units series up to 8.5 GHz: 2, 4 or 6 ports SMA(f), ZN-Z154 up to 24 ports, 2-port type N(f). ZN-Z156: 2 ports 67 GHz.

A computer simulation for the R&S®ZNA, R&S®ZNB, R&S®ZNBT and R&S®ZND that can be used to test a remote control program without the need for any VNA hardware.

ZN-Z3x: Automatic recalibration without reconnecting calibration equipment. Supports TVAC, multiport and production systems. CAN bus network control. Up to 40 GHz.

ZCAN Network Analyzer Calibration Kit - Economy calibration kit with N-type calibration standards open, short, match, through, all in both, male and female versions. Up to 3 GHz. Available for 50 Ω and 75 Ω reference impedance.

ZND vector network analyzers perform unidirectional measurements up to 4.5 GHz and can be expanded to perform bidirectional measurements up to 8.5 GHz.

ZNBT true multiport VNA vector network analyzer with up to 24 true VNA ports. Frequency range from 9/100 kHz to 8.5/20/26.5/40 GHz.

R&S®RF Ports Alignment Software - Tailored solution for calibrating amplitude, time and phase of multi-channel SMW200A setups.

There are several reasons to characterize RF components under pulsed conditions. Often it is to prevent thermal damage to the device under test or to characterize it under operating conditions. Vector Network Analyzers offer integrated hardware and software for accurate device characterization under pulsed conditions. This hardware includes built-in pulse modulators, pulse generators and synchronization IO including for external device control.