R&S®ZND 벡터 네트워크 분석기

기본, 고성능 네트워크 분석

R&S®ZND 벡터 네트워크 분석기
라이트박스 열기
R&S®ZND 벡터 네트워크 분석기
라이트박스 열기
R&S®ZND 벡터 네트워크 분석기
라이트박스 열기
R&S®ZND 벡터 네트워크 분석기
라이트박스 열기
R&S®ZND Vector Network Analyzer, 전면 R&S®ZND Vector Network Analyzer, 히어로 뷰 R&S®ZND Vector Network Analyzer, 후면 R&S®ZND Vector Network Analyzer, 전면

주요 사항

  • 100kHz ~ 4.5GHz 단방향 2포트 VNA
  • 8.5GHz로 확장 가능한 주파수 대역
  • 테스트 세트는 양방향 측정으로 확장 가능
  • 간단한 터치스크린 작동
  • 뛰어난 RF 성능

기본, 고성능 네트워크 분석

R&S®ZND Network Analyzer 기본 모델은 최대 4.5 GHz까지 단방향 측정을 수행합니다. R&S®ZND는 확장을 통해 양방향 측정을 진행할 수 있으며 주파수 대역을 8.5 GHz까지 확장할 수 있습니다. R&S®ZND의 대형 터치스크린은 쉽게 조작할 수 있으며 많은 다이어그램이 필요한 경우에도 S-파라미터 측정에 적합합니다. 시간 도메인 측정을 추가하여 더 많은 기능을 사용할 수 있습니다.

기능 및 장점

유연한 테스트 세트

사용자의 필요 사항에 따라 확장하는 분석기

R&S®ZND 테스트 세트를 개별 요구사항에 맞게 구성할 수 있습니다. 테스트 세트를 사용자 요구사항에 따라 단방향 작업에 맞게 설정하거나 양방향 작업을 위해 확장할 수 있습니다. 주파수 및 전력 스윕 범위를 간단히 확장할 수 있습니다.

단방향/양방향 테스트 세트
라이트박스 열기

단방향/양방향 테스트 세트

R&S®ZND 단방향 테스트 세트(블랙), 양방향 테스트 세트용 확장(블루), 확장 출력 영역 옵션(그레이)

간편한 조작

대형 디스플레이 및 체계적 구조의 사용자 인터페이스

12.1" 터치스크린은 하나의 화면으로 여러 다이어그램 또는 모든 측정값을 선명하게 표시할 수 있습니다. 단순한 사용자 인터페이스 메뉴 구조로 측정을 효율적으로 설정하고 측정을 간단하고 빠르게 시작할 수 있습니다.

라이트박스 열기

편리한 교정

모든 애플리케이션에 적합한 교정 방법

R&S®ZND는 테스트 세트 구성에 따라 다양한 측정을 위한 다양한 교정 방법을 제공합니다. 로데슈바르즈는 수동 교정 키트 또는 빠른 교정을 위한 자동 교정 유닛을 모두 제공합니다.

라이트박스 열기

SCPI 레코더

복잡한 측정의 테스트 자동화 간소화

R&S®ZND SCPI Recorder는 사용자 기기 작동에서 SCPI 명령 시퀀스를 자동 생성합니다. 캡처된 명령 시퀀스는 C++, Python, MATLAB®과 같은 다양한 프로그래밍 언어로 내보낸 다음 직접 사용할 수 있습니다. R&S®ZND SCPI Recorder는 개발, 검증, 생산을 위한 테스트 자동화를 구현하는 강력한 툴입니다. 이 툴은 복잡한 측정을 간소화하며 워크플로우의 효율성을 최적화합니다.

라이트박스 열기

간단한 테스트 포트 확장

최대 24개 포트까지 측정

R&S®ZND를 R&S®ZN-Z84 Switch Matrix와 함께 사용하면 양방향 포트 수를 쉽게 확장할 수 있습니다. R&S®ZND는 멀티포트 모듈 또는 최대 24 포트를 보유해 여러 기기에 사용할 수 있는 포괄적인 솔루션을 제공합니다. 자동 교정 유닛인 R&S®ZN-Z154를 사용하면 최대 24 포트를 위한 빠르고 정확한 셋업 교정이 가능합니다. 또한, R&S®ZND-K100 옵션에 SNP 어시스턴트 측정 마법사를 탑재할 경우 단계를 최소화한 최적 재연결을 통해 필요한 측정을 지능적으로 안내합니다. 측정 결과는 마지막에 고차 Touchstone 파일로 편리하게 생성됩니다.

SNP 어시스턴트로 테스트 항목을 쉽게 정의
라이트박스 열기

SNP 어시스턴트로 테스트 항목을 쉽게 정의

SNP 어시스턴트가 DUT 토폴로지 정의를 직관적인 컬러 매트릭스로 표시해줍니다.

디임베딩 옵션

고정장치 내부 및 PCB 테스트를 위해 개선된 툴

R&S®ZND는 다른 테스트 픽스처의 영향을 제거하는 데 사용할 수 있는 다양한 임베딩/디임베딩 기법을 지원하며 DUT를 정밀 특성분석합니다.  지원되는 디임베딩 알고리즘이 R&S®ZND 사용자 인터페이스에 완벽히 통합되었으며 IEEEP370에 따른 업계 표준 기법을 기반으로 합니다. 옵션은 다음과 같습니다.

  • EaZy 디임베딩(EZD, R&S®ZND‑K210),
  • In-situ 디임베딩(ISD, R&S®ZND‑K220), 
  • 스마트 픽스처 디임베딩(SFD, R&S®ZND‑K230) 및
  • Delta-L PCB 특성분석(SFD, R&S®ZND‑K231)

사용 가능한 모델

사용 가능한 옵션

정보 요청

추가 문의 사항이나 추가 정보가 필요하십니까? 이 양식에 맞춰 내용을 입력해 주시면 회신 드리겠습니다.

마케팅 동의

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.
일반 정보 및 법정 정보

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.