소식 검색
160 결과
Dec 22, 2021 | 보도 자료 | Wireless communications
Rohde & Schwarz collaborates with Broadcom on test solution for next generation 6-GHz Wi-Fi devicesThe R&S CMP180 radio communication tester has been successfully validated for Broadcom’s Wi-Fi 6E chipsets. OEMs and ODMs of wireless devices are now able to bring their first next generation 6-GHz products to the market.
Mar 06, 2025 | 보도 자료 | Test & measurement
Rohde & Schwarz revolutionizes EMC Testing at EMV 2025: Unveiling innovative T&M solutions for a connected worldRohde & Schwarz is set to present a comprehensive suite of EMC and field strength test equipment at the EMV show 2025 in Stuttgart from March 25 to 27, 2025. The display will include standalone instruments, software, and systems designed to meet various industry standards. The solutions support commercial, automotive, military and aerospace standards, as well as ETSI and FCC standards. Visitors can witness these innovative demonstrations at booth number 615.
Dec 21, 2023 | 보도 자료 | Wireless communications
Rohde & Schwarz and VIAVI jointly verify Analog Devices’ leading O-RU reference design at i14y Lab PlugFest Fall 2023At the recent O-RAN ALLIANCE Global PlugFest Fall 2023, hosted at the i14y Lab in Berlin – supported by Deutsche Telekom and EANTC and i14y consortium partners, Rohde & Schwarz and VIAVI Solutions have presented their integrated solution for conformance testing of O-RAN Radio Units (O-RUs). With their joint test solution, which combines both companies’ industry-leading capabilities, they verified Analog Devices’ innovative 8T8R O-RU reference design according to both O-RAN and 3GPP pre-conformance specifications.
Sep 13, 2023 | 보도 자료 | Automotive
EuMW 2023: Rohde & Schwarz introduces the shortest possible distance simulation for FMCW radarsThe radar test system from Rohde & Schwarz simulates driving scenarios for testing radar based advanced driver assistance systems (ADAS) and radar sensors used in automated driving cars (AD) entirely over the air. Now Rohde & Schwarz introduces new options for the R&S AREG800A automotive radar echo generator and the R&S QAT100 antenna array. The system is able to generate extremely short distances for the artificial objects, and therefore enables realistic autonomous braking tests with the smallest distance possible on the market.
Sep 07, 2022 | 보도 자료 | Test & measurement
R&S FSV and R&S FSVA signal and spectrum analyzers from Rohde & Schwarz extend frequency up to 50 GHzWith the introduction of the new variants R&S FSV3050 and R&S FSVA3050, the frequency range of this signal and spectrum analyzer family is now extended to 50 GHz. An additional option empowers the extension of signal analysis even up to 54 GHz. The high-speed analyzers for lab and production are ideal for 5G NR testing – now also supporting the full FR2 frequency range up to 52.6 GHz and applications in the aerospace & defense industry. The solution will be shown at EuMW from September 27 to 29, 2022 at booth D18 of the Milano Convention Centre.
Nov 17, 2021 | 보도 자료 | Test & measurement
Rohde & Schwarz adds new frequency ranges to its portable all-rounder spectrum analyzersNew base models for the portable R&S FPL1000 take spectrum and signal analysis capabilities up to 26.5 GHz. They combine the functionality of benchtop instruments and the portability of a handheld instrument, with intuitive features to make high performance measuring on the go fast and simple.
Jul 11, 2022 | 보도 자료 | EMC testing
Rohde & Schwarz showcases its market-leading, reliable EMC test solutions at EMV in CologneAt the EMC event EMV in Cologne, Rohde & Schwarz demonstrates a comprehensive range of EMC test and measurement solutions – ranging from standalone instruments and software to application-specific systems. As a highlight, the company unveils an important enhancement to the R&S ESW EMI test receiver, the new 1GHz bandwidth extension. The Rohde & Schwarz solutions are on display from July 12 to 14, 2022 at the Cologne exhibition center, hall 10.2, booth 112.
Oct 13, 2020 | 보도 자료 | Wireless communications
Rohde & Schwarz propels 5G LBS with Assisted-GPS and 5G NR FR2 mmW performance testingAs wireless network operators roll out 5G NR in the millimeter wave spectrum, it is critical to ensure continued reliability of E911 calls and accurate determination of location in mobile devices.
Mar 07, 2024 | 보도 자료 | Test & measurement
Rohde & Schwarz introduces dedicated phase noise analysis and VCO measurements up to 50 GHz with the R&S FSPN50With the latest model of the R&S FSPN phase noise analyzer and VCO tester, Rohde & Schwarz extends the frequency range for measurements from the previous maximum of 26.5 GHz up to 50 GHz.
Mar 18, 2025 | 보도 자료 | Test & measurement
EMV 2025: Rohde & Schwarz presents new antenna for EMI measurements in frequency range from 14.9 GHz to 44 GHzAt the EMV 2025 tradeshow in Stuttgart, Rohde & Schwarz displays for the first time its R&S HF1444G14 High-gain EMI microwave antenna with outstanding performance. The antenna covers a frequency range from 14.9 GHz to 44 GHz. It meets the requirements of the standards CISPR 16-1-4 and CISPR 16-2-3. Precise mechanical construction and optionally available individual calibration make the antenna ideal for electromagnetic interference measurements. With the R&S HF1444G14 Rohde & Schwarz addresses the trend towards higher frequencies and accelerates and simplifies the test of large objects in smaller chambers.
Jan 14, 2025 | 보도 자료 | EMC testing
New unleashed frequency ranges: Rohde & Schwarz extends broadband amplifiers to 18 GHzHigher field strengths for critical test environments up to 18 GHz
Jun 17, 2025 | 보도 자료 | Test & measurement
R&S FSWP phase noise analyzer and VCO tester now supports up to 56 GHz and external signal sourcesRohde & Schwarz has updated the R&S FSWP for upcoming applications. The new option R&S FSWP-B56G extends the frequency range up to 56 GHz. With the support of external high-end sources as local oscillators it combines the advantage of an easy-to-use signal source analyzer and a high-end phase noise tester. For additive and residual phase noise measurements on amplifiers Rohde & Schwarz has extended the frequency range of the internal signal source up to 54 GHz. In addition, a new and very easy method for noise figure measurements has been added.
Apr 23, 2024 | 보도 자료 | Test & measurement
Rohde & Schwarz introduces new R&S SMB100B microwave signal generator for analog signal generation up to 40 GHzAvailable with four frequency options each covering from 8 kHz to 12.75 GHz, 20 GHz, 31.8 GHz or 40 GHz, the new R&S SMB100B microwave signal generator from Rohde & Schwarz brings excellent output power, spectral purity, very low close-in phase noise, and practically no wideband noise to analog microwave signal generation.
Dec 12, 2024 | 보도 자료 | Test & measurement
Rohde & Schwarz presents new essential power sensors for accurate measurements in frequency ranges up to 18 GHzWith its new R&S NRPxE RF power sensors, Rohde & Schwarz sets a new standard for accurate and reliable power measurements in frequency ranges up to 18 GHz, while offering an unprecedented level of affordability. These innovative sensors offer a perfect blend of precision, durability, and value, making them an ideal solution for a wide range of applications, from R&D and production to education and field service
May 30, 2023 | 보도 자료 | Wireless communications
Rohde & Schwarz and IEMN collaborate on 6G THz by bringing together electronic and photonic technologiesThe Institute of Electronics, Microelectronics and Nanotechnology (IEMN, Lille, France) and Rohde & Schwarz have expanded their collaboration to research THz communications that utilize photonic technologies. In a recent demonstration, IEMN reached a milestone when researchers achieved generated a 300 GHz bidirectional link over an outdoor distance of 645 m for use in future 6G backhauling scenarios. The R&S SMA100B microwave signal generator from Rohde & Schwarz was a crucial component in the performance test setup. The R&S SMA100B provides an ultra-low phase noise signal that helps accelerate THz communications research and development to ready it for industrialization.
Nov 28, 2023 | 보도 자료 | Wireless communications
Unique Rohde & Schwarz 170 GHz power sensors ease use and traceability in the D-bandRohde & Schwarz is launching the new R&S NRP170TWG(N) thermal power sensor for precise power level measurements in the D-band. It is the only RF power sensor on the market that offers full traceability to national metrology institutes (NMI) in the frequency range from 110 GHz to 170 GHz, an important prerequisite for commercializing the frequency band. The R&S NRP170TWG(N) hardware is designed to reduce measurement noise and drift, while remaining very accurate and easy to use. The sensors are fully calibrated plug & play devices that can be easily integrated into any measurement setup with a USB or LAN connection.
Sep 12, 2023 | 보도 자료 | Wireless communications
Rohde & Schwarz continues to drive early 6G and sub-THz research with new dedicated W and D band test solutionsTo support pioneering mmWave and sub-THz research, Rohde & Schwarz continues to roll out advanced RF test and measurement solutions. Three additional products tailored to W and D band applications will be showcased at the EuMW 2023 in Berlin: The new R&S SFI100A wideband IF vector signal generator, the R&S NRP170TWG thermal power sensor and the R&S FE110ST/SR TX/RX frontends. All three enable researchers to characterize devices and circuits for beyond 5G and 6G mobile communications as well as the novel sensing and automotive radar applications of tomorrow.
Feb 24, 2025 | 보도 자료 | MWC 2025
Rohde & Schwarz and Qualcomm unlock potential of proposed FR3 frequency range for next generation 6G wireless networksRohde & Schwarz and Qualcomm Technologies, Inc. have successfully validated the high-throughput performance of a 5G NR connection at 13 GHz, a band that falls within the proposed FR3 frequency range. This milestone, which the two companies will demonstrate jointly at MWC 2025 Barcelona, paves the way for the next generation of wireless networks.
May 23, 2024 | 보도 자료 | EMC testing
Rohde & Schwarz extends ultra-wideband RF amplifier rangeHigher field strengths for critical test environments
Feb 15, 2024 | 보도 자료 | MWC2024
Rohde & Schwarz enables Qualcomm to pioneer new frequency ranges for future 5G-Advanced and 6G networksIn the evolving landscape of 5G networks, leveraging frequency ranges FR1 (0.41 to 7.125 GHz) and FR2 (24.25 to 71 GHz) has been pivotal. As the era of 5G-Advanced and 6G unfolds, a third frequency range is being discussed in global regulatory and industry consortiums worldwide. FR3, which is also known as upper-midband, spanning 7.125 to 24.25 GHz, will open a new frontier for mobile communication technology. Rohde & Schwarz technology plays a key role in enabling Qualcomm Technologies to show the readiness and effectiveness of the latest RF modem technology for FR3.
Feb 25, 2025 | 보도 자료 | Test & measurement
Rohde & Schwarz launches new R&S ZNB3000 vector network analyzer ideal for high-volume production environmentsRohde & Schwarz introduces the R&S ZNB3000, a new vector network analyzer optimized for high-volume production and short ramp-up times, thanks to industry-leading measurement speed and reliability. Its scalable design allows for rapid upscaling and easy adaptation to application specific requirements. Featuring the highest dynamic range and output power in its class combined with future-ready performance, it supports the development of next-generation technologies.
Sep 03, 2024 | 보도 자료 | Test & measurement
Rohde & Schwarz presents its top-notch RF and microwave test solutions at the EuMW 2024 in ParisPremier microwave, RF, wireless and radar players gather in the city of light for the European Microwave Week (EuMW). Industry-leading T&M specialist Rohde & Schwarz will present a radiating portfolio of products and solutions in Paris for various application fields, pushing the limits in the Gigahertz to Terahertz frequency ranges.
Mar 20, 2025 | 보도 자료 | Test & measurement
Rohde & Schwarz launches high-flexibility EMI test receivers at EMV2025 paving the way for optimized investmentsThe new EMI test receivers R&S EPL1001 up to 1 GHz and R&S EPL1007 up to 7.125 GHz offer engineers a flexible and cost-effective solution for EMI measurements. Their expandable features support optimized and secured investments, as additional options can be integrated at any time as needed. Depending on the configuration, these receivers can be used for measurements during the development phase, certification preparation and final testing to ensure compliance with latest EMI standards.
Mar 13, 2023 | 보도 자료 | Test & measurement
Rohde & Schwarz and SatixFy to demonstrate wideband DVB-S2X beam hopping and DVB-RCS2 at Satellite Show 2023Rohde & Schwarz will showcase an end-to-end test infrastructure featuring its R&S SMW200A vector signal generator and R&S FSW signal and spectrum analyzer together with SatixFy’s Sx3099 modem ASIC demonstrating DVB-S2X Annex E wide bandwidth beam hopping and high bit rate DVB-RCS2 transmission.
Sep 19, 2024 | 보도 자료 | 6G
Rohde & Schwarz presents photonics-based ultra-stable tunable THz system for 6G at EuMW 2024With the proof-of-concept for a system for 6G wireless data transmission based on a photonic THz communications link, Rohde & Schwarz is showcasing its contribution to state-of-the-art research for next generation wireless technologies at European Microwave Week in Paris. The ultra-stable, tunable THz system, developed within the 6G-ADLANTIK project, is based on frequency comb technology and enables carrier frequencies well beyond 500 GHz.
May 23, 2023 | 보도 자료 | Test & measurement
Rohde & Schwarz signal generators and analyzers approved by Qualcomm for O-RAN compliant 5G RAN platformsThe R&S SMW200A and R&S SMM100A vector signal generators and the R&S FSW and R&S FPS signal and spectrum analyzers from Rohde & Schwarz have been approved by Qualcomm for testing the Qualcomm® QRU100 5G RAN Platform – an O-RAN compliant solution with architecture flexibility designed to facilitate scalable and cost-effective 5G network deployments. OEMs providing RUs for Open RAN infrastructure adopting the Qualcomm QRU100 5G RAN Platform can be confident that these Rohde & Schwarz solutions meet the necessary sub-6 GHz test requirements for design verification and production.
May 15, 2024 | 보도 자료 | Test & measurement
Rohde & Schwarz introduces the MXO 5C series, the world’s most compact oscilloscope with up to 2 GHz bandwidthRohde & Schwarz extends its portfolio with a 2U high oscilloscope/digitizer tailored for rack mount and other applications where a low-profile form factor is critical. The new MXO 5C series is the company’s first oscilloscope without an integrated display. It delivers the same performance as the previously introduced MXO 5 series, but with a fourth of the vertical height.
Jun 18, 2024 | 보도 자료 | EMC testing
Rohde & Schwarz launches high power RF amplifier for test applications13 kW output across broad spectrum
Dec 02, 2021 | 보도 자료 | Test & measurement for ADS
Signal source analyzer from Rohde & Schwarz in operation at laboratories of US Air ForceAFMETCAL, the Air Force Metrology and Calibration Authority, has ordered signal source analyzers (SSA) from Rohde & Schwarz. They will be operated in AFMETCAL’s precision measurement equipment laboratories (PMEL’s) and Air Force primary standards laboratory (AFPSL). The signal source analyzers are used for calibration of phase noise analog (AM, FM & PM) and digital modulation measurements. For phase noise measurement Rohde & Schwarz has also provided cross-correlation offering very high sensitivity, flexibility and fast measurement speed — all in one box.
May 03, 2023 | 보도 자료 | Test & measurement
Rohde & Schwarz demonstrates solutions for particle accelerators at IPAC’23 in VeniceParticle accelerators are a key element in much of today’s cutting-edge research, including fundamental scientific research or applied disciplines such as materials science or medicine. The 14th International Particle Accelerator Conference allows visitors to gain insight into the latest developments from around the world. Rohde & Schwarz exhibits a comprehensive portfolio of solutions that meet high precision particle accelerator requirements, address challenges in elementary particle research, particle therapy applications, material characterization, precise beam forming and monitoring as well as safe storage.