9020 Results
The R&S®RTO digital oscilloscope analyzes RF pulses up to the maximum bandwidth of the instrument used.
09-Nov-2017
GSM Measurements with the R&S CMU200 and CMUgo
24-May-2005 | AN-No. 1CM57
High sampling rate and automatic pulse analysis make the R&S®NRP-Z8x wideband power sensor family ideal for time-domain analysis of radar pulses.
06-Aug-2013
To measure linearity, a single R&S CLG cable load generator generates the entire full digital channel load of a cable TV network.
18-Jun-2013
This application note addresses the diverse possibilities of interoperability between Rohde & Schwarz power sensors and Rohde & Schwarz signal generators. All current and many legacy Rohde & Schwarz signal generators offer the capability of directly connecting power sensors. This enables power measurements without the need of a base unit or separate PC to display the readings. Furthermore, sensors can be used for special tasks like filling a user correction table or continuously controlling levels at crucial points in the measurement configuration.
31-Aug-2023 | AN-No. 1GP141
Automatic monitoring of emission parameters of registered broadcasting transmitters
04-Sep-2006
R&S<sup>®</sup> DIRECTV<sup>®</sup> tool for converting 130-byte-based DIRECTV<sup>®</sup> streams to ISO 13818-1 (188 bytes) MPEG format for R&S<sup>®</sup> SFU TRP player
05-Oct-2007 | AN-No. 7BM69
To generate a full channel load, as necessary for DVB-C2 receiver tests for example, only two Rohde & Schwarz instruments, the R&S BTC and R&S CLG, are necessary.
30-Jul-2013 | AN-No. 7BM88
This application note demonstrates the use of the FSMR, including the Cross-correlation option (R&S®FSMR3-B60), to measure the Phase Noise characteristics of a raw Signal Generator (R&®SMA100B).
31-Dec-2021 | AN-No. 1SL376
SITLine ETH: Highly secure data center connection for file and content applications
27-Jan-2014
Quality automotive radome tester analyzes your radar integration
27-Aug-2019
Fast Scalar Network Analysis Using a Signal Generator and a Power Meter
14-Jul-2006 | AN-No. 1MA101
The R&S®ZNA vector network analyzer with integrated LO output and direct IF input options is a simple, cost-effective solution for 2-port and 4-port measurements using Rohde & Schwarz mmWave converters.
27-Apr-2023
The R&S®ZNA vector network analyzer offers a dynamic range and unlocks potential applications that previously could not be addressed with a vector network analyzer.
07-Jan-2019
Noise Figure Measurement without a Noise Source on a Vector Network Analyzer
27-Oct-2010 | AN-No. 1EZ61
With its small footprint, the R&S®ATS1000 antenna test system is the ideal direct far-field OTA system to test phased array antennas.
12-Mar-2020
This application note explains how to convert different Rohde&Schwarz I/Q file formats among each other using the supplied software tool.
23-Sep-2015 | AN-No. 1EF85
This app note provides an introduction into the various jitter components and elucidates the commonly available jitter separation frameworks.
08-Dec-2021 | AN-No. 1SL375
The document focusses on devices for the 3.5 GHz NR (5G New Radio) candidate band, but its findings are equally applicable to developments and measurements for K-band satellite applications or mmW NR candidate bands,
01-Aug-2017 | AN-No. 1MA289
Direct remote control of OSP via VNA and SA
06-Dec-2013 | AN-No. 1MA226
RF signal monitoring in DVB-T2 multi-PLP networks
24-Jul-2012
This application note describes the necessary settings in the user interface of the R&S® Broadcast Test Center BTC which supports the new “Next Generation Broadcast Standard ATSC 3.0” with BTC firmware version 2.20 and later.
27-Mar-2018 | AN-No. 1GP119
Secondary surveillance radar (SSR) bridges the gap between communications systems and classic radar systems. Despite the increasing capabilities of mobile communications, SSR remains a major component in airspace surveillance.
17-May-2021
The Rohde & Schwarz Bluetooth RF test solution with the R&S CMW and R&S CMWrun is closely aligned to the Bluetooth RF Test Suite. This document describes common setups for these tests and the required configurations.
04-May-2015 | AN-No. 1MA261
Generating and Analyzing 3 GPP Multicarrier Signals with High Dynamic Range
17-Feb-2005 | AN-No. 1MA48
This application note describes typical spectrum analyzer measurements in production environments and discusses different approaches to speed them up.
17-Nov-2014 | AN-No. 1EF90
Measurement of Power Ramps of GSM, DCS1800 and PCS1900 Signals with Spectrum Analyzers of the FSE Family
16-Jan-2002 | AN-No. 1EF18
This Application Note provides guidance on using the “Intermodulation Wizard” through an example measurement.
27-Mar-2013 | AN-No. 1EZ63
This white paper introduces measures to minimize malware threats and discusses ways to reduce risks while insuring that instrument performance is not compromised. The paper also discusses the use of anti-virus software in combination with Embedded Linux based instruments.
23-Nov-2016 | AN-No. 1GP112
Mastering automotive radar EIRP measurement for peak performance
06-Aug-2024